West Sussex · England
Bathroom & kitchen resealing in The Haven, West Sussex
We cover The Haven for bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Gaps between the worktop and the wall
- Black mould in the silicone that will not clean off
- Water getting behind the bath panel
Bathroom resealing for homes and businesses in The Haven
The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. When it splits, shrinks or turns black, water gets behind it into walls, panels and floors. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. If you’re dealing with shrunken sealant along the back of a worktop and sealant that has split, shrunk or peeled away, we can put it right, whatever the surface.
In a village or hamlet like The Haven, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
We guarantee the work for a year. If something is not right with it in that time, tell us and we’ll put it right.
- Location
- The Haven (RH14)
- Wider area
- West Sussex
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
How it works
We keep the work tidy and contained to the joints we are treating, so you can get on with your day. The job normally takes a couple of hours for a single bath or shower. Somewhere like The Haven needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Getting ready for the visit
- Keep children and pets away from the work area
- Let us know if you’ve seen damp or leaks
- Tell us if parking is tricky
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Related advice
What affects the quote in The Haven
There’s no set price list, because jobs vary so much. What we look at:
- The number and length of the joints
- Whether the work is at height
- When we can work, for business premises
- Any mould that needs treating
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.
Asking for a quote
When you call or email, these details help:
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or drop us an email.
Places near The Haven
What else we do in The Haven
The Haven questions
Is The Haven within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Billingshurst station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can phone 0345 464 0079 or email us with the details for a clear quote.
Where is Mr Mastic based?
We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Is it OK to put new sealant on top of the old bead?
No. It’s a common reason for reseals failing. We cut out all of the old sealant, clean the joint and start again.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
What sealant do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Can mouldy silicone be sorted out?
Yes. Once mould has grown into the silicone, it generally cannot be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
What we cannot put right
We will not take on work that will not last, so these are the limits:
- A bath or tray that moves because it is not properly supported
- Damage behind the tiles that needs a tiler
- Cracks in the tray itself rather than the joint
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer.
Surfaces we seal
- Kitchen worktops & upstands
- Baths
- Sinks & splashbacks
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
Why it’s worth doing now in The Haven
A quick bead over the top of the old one might look better for a while, but it won’t bond. Water creeps under it and mould follows, and the next reseal means two layers to cut out. In a small place like The Haven, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before work begins.
Why choose Mr Mastic in The Haven
- White, clear, grey or another colour, product permitting
- A sealant colour to suit the surroundings
- Colour agreed with you before any work starts
- Quality sealants from Arbo and Everbuild
Take a look at how sealant jobs are priced or what customers say.
Landlord and commercial work in The Haven
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Avoid abrasive pads on the sealant
- Open a window or run the fan so the room dries
- Wipe up water along the back of the worktop
- Dry the bead with a towel now and then
Clean the silicone with care: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
What bathroom resealing looks like in The Haven
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
If you let a flat or house near Billingshurst station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. In and around The Haven, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
The Haven is about 3 miles north of Billingshurst, in West Sussex. From the centre of The Haven to the outskirts, bathroom resealing is available for homes and businesses alike. We cover 371 towns and villages across West Sussex, large and small. You can also see our page for Crawley, about 12 miles away.
Every address in RH14 is covered for bathroom resealing, from the main roads to the quietest streets. We also cover the places around The Haven: Five Oaks (1 mile south-east), Bucks Green (2 miles north), Slinfold (2 miles east), Rudgwick (2 miles north) and Tisman's Common (2 miles north-west). We also work in nearby towns such as Crawley (12 miles east), Horsham (5 miles east), Broadfield (11 miles east), Storrington (10 miles south), Billingshurst (3 miles south) and Bewbush (10 miles east).
What’s near The Haven
We work in homes and buildings around The Blue Ship Public House, among other places. The nearest railway station is Billingshurst station, about 3.4 miles south of the centre. Well-known places in the area include Horsham Hospital (5.3 miles east) and Christs Hospital School Museum (3.9 miles east).
How the job changes by surface
Baths
Acrylic baths give a little under load, while steel and cast iron baths move less but still settle when full. Filling the bath first allows for that movement.
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They’re resealed with anti-fungal sanitary silicone, and our work is on the visible joints only.