East Sussex · England
Bathroom & kitchen resealing in Telscombe, East Sussex
Bathroom resealing across Telscombe and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Leaks into the floor or ceiling below
- A bead that has pulled away from the tiles
- Failed sealant on the screen profile
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Check the joints every few months for splits or lifting
- Wipe the sealant dry after showering
- Keep the fan on for a while after bathing
- Never pick at the silicone with a blade
Wipe up standing water along the worktop joint and keep hot pans off the bead. The drier the joint stays, the longer it lasts.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning normally will not remove it. Catching it early keeps it a simple reseal.
Bathroom resealing for homes and businesses in Telscombe
It is not only bathrooms. Worktop upstands, sink edges and splashback joints all take splashes every day, and water behind a laminate worktop can make it swell. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. We work on baths, basins & vanity units and wet rooms, and people most often call us about a reseal done over the top of the old bead and mouldy sealant that has gone black.
Smaller places like Telscombe still have plenty of bathrooms that work hard every day. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: all the old material out, the joint cleaned and dried, then new sealant or grout.
Every job is covered by our one-year guarantee, wherever you are in East Sussex.
- Place
- Telscombe (BN10, BN2, BN7)
- Region
- East Sussex
- Guarantee
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Places near Telscombe
Also in Telscombe
How the job changes by surface
Baths
Acrylic baths give a little under load, while steel and cast iron baths move less but still settle when full. Filling the bath first allows for that movement.
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. It’s resealed in white, clear or a colour to suit.
Work for landlords, hotels and businesses
Letting agents often deal with us directly. Tell us the address, the job and how access works.
We also work for property managers and facilities teams in Telscombe and across East Sussex. We can quote a run of properties together, and we are fully insured for the work.
Your questions about bathroom resealing in Telscombe
Do you cover Telscombe for bathroom resealing?
Yes. Our work covers London and the South East, and Telscombe is part of that. You can ring 0345 464 0079 or send us an email and let us know what needs doing, and we will give you a clear quote.
Can you help a landlord with a rental near Southease station?
Yes, we work for letting agents and landlords. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll send you a clear quote.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can I choose the colour of the sealant?
White and clear are the most common choices, but other colours can be used to suit tiles and worktops. Tell us what you’d like when you get in touch.
Do you remove the old sealant?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
What do you need from me for a quote?
The location, the problem and the rough size of the job. If you can, email a few pictures.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we’ll tell you what we’re using.
How do I get a quote for bathroom resealing in Telscombe?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before work begins.
Bathroom resealing around Telscombe
Telscombe is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Rented homes near Southease station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. Homes close to The Parish Church of St Lawrence include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them. Schools such as Telscombe Cliffs Community Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Telscombe is about 6 miles east of Brighton, in East Sussex. Across the BN10 area, our applicators can take on bathroom resealing. Telscombe is one of 289 places in East Sussex where we work for bathroom resealing. Brighton is on our list too, about 6 miles from Telscombe.
Our applicators cover all of the BN10, BN2 and BN7 postcode area for bathroom resealing. Bathroom resealing is available to properties on Tor Road, View Road and Firle Road and the roads around them. We also cover East Saltdean (1 mile west), Saltdean (1 mile west), Piddinghoe (2 miles east), Rodmell (2 miles north-east) and Rottingdean (3 miles west). Within a short drive, we also cover Eastbourne (13 miles east), Seaford (6 miles east), Lewes (5 miles north), Hailsham (12 miles east), Uckfield (12 miles north-east) and Newhaven (3 miles east).
What’s near Telscombe
Typical jobs here are in homes near Peacehaven Community School and Smugglers Rest pub and the streets around them. Telscombe’s nearest station is Southease station, about 2.6 miles north-east. Other landmarks nearby include Planet Earth Museum (2.8 miles east) and Lewes Castle (4.9 miles north). Green spaces nearby include Itford Hill and Beacon Hill Local Nature Reserve.
What affects the quote in Telscombe
There’s no set price list, because no two jobs are the same. What we look at:
- Any working-time requirements on site
- The amount of work
- The old material and how stubborn it is
- How easy the joints are to reach
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or email us and we will talk you through it.
What to tell us for a quote
When you contact us, it’s useful to know:
- How many joints, rooms or windows are involved
- Photos by email, if that’s easy
- The type of property
- The address or postcode of the job
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, call 0345 464 0079 or email us.
Honest limits
We’ll always be straight with you, so here’s what sealant can’t fix:
- A cracked shower tray or bath (that needs repair or replacement)
- Damage behind the tiles that needs a tiler
- Water getting in through the grout rather than the sealant
If in doubt, call 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Baths
- Sinks & splashbacks
- Kitchen worktops & upstands
The process
We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes half a day or less for one room, longer when the kitchen is included and we leave things clean and tidy. In a smaller place like Telscombe, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Preparing for the visit
- Keep children and pets away from the work area
- Mention any leaks or damp you’ve noticed
- Mention if the joints have been sealed before
Ask for a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll take it from there.
Related advice
Why it’s worth doing now in Telscombe
You don’t need a new bathroom because the sealant looks bad. A new bead often brings the whole room back, as long as the fittings themselves are sound. If we find a deeper problem, you will hear it from us. Homes in smaller places like Telscombe can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Why book with us
- Domestic, commercial and hotel work
- A 12-month guarantee on all work
- You choose the colour before work begins
- Anti-fungal sanitary silicone in wet areas