Kent · England
Bathroom Resealing in Swanton
Problem with your baths, showers and worktops in Swanton? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Cracked, shrunken or lifting silicone
- A messy, uneven bead from a previous reseal
- Failed sealant on the screen profile
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- Water getting in through the grout rather than the sealant
- A tray or bath that’s cracked through
- Tiles that have come away from the wall
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think before you book.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Baths
- Sinks & splashbacks
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
Bathroom resealing in Swanton, done properly
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Swanton. We’re ARBOMaster approved and fully insured, and every job carries our one-year guarantee. We’re often asked to deal with gaps between the worktop and the wall and black spots spreading through the bead, on shower trays & enclosures, baths and kitchen worktops & upstands.
For a small place like Swanton, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
All our work is covered by a 12-month guarantee, wherever you are in Kent.
- Location
- Swanton (ME18)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Swanton homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Wateringbury station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For an older house near a landmark such as Church of St Dunstan, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Swanton is about 5 miles north-east of Tonbridge, in Kent. Jobs in Swanton get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. We cover 922 towns and villages across Kent, large and small. Our London page covers work nearby.
Postcode districts we cover here for bathroom resealing: ME18. Neighbouring places we cover for bathroom resealing include West Peckham (1 mile south), New Pound (1 mile north-east), Mereworth (1 mile east), Herne Pound (1 mile north-east) and Roughway (1 mile west). Larger places within reach include Maidstone (8 miles east), Dartford (14 miles north-west), Sevenoaks (7 miles west), Royal Tunbridge Wells (9 miles south-west), Gravesend (12 miles north) and Tonbridge (5 miles south-west).
What’s near Swanton
We work in homes and buildings around Swan on the Green pub. For rail, the closest station is Wateringbury station, about 3 miles east of the centre. Nearby you’ll also find Beechin Wood Archery Museum (2 miles north-west) and Ightham Court (3.8 miles north-west).
Different surfaces, different methods
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, sealing the side the enclosure’s instructions call for.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Old sealant there often goes black at the corners, so it’s cut out and renewed just like a bath joint.
Places near Swanton
More services for Swanton
The process
Before we leave, we go over the finished joints with you. The work normally takes a couple of hours for a single bath or shower, depending on the amount of work. Somewhere as small as Swanton, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you’re told the cure time, generally around 24 hours.
Before we arrive
- Mention any sign-in or site rules at work premises
- Let us know about stairs, lifts or work at height
- Keep pets and children clear of the area while we work
Get a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll talk you through the work and give you a clear quote.
Advice
Quotes for bathroom resealing in Swanton
There’s no set price list, because jobs vary so much. The quote depends on:
- The amount of work
- Whether old sealant or filler has to be cut out
- Any working-time requirements on site
- The type of sealant required
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we will explain what it covers.
Helping us quote
When you contact us, it’s useful to know:
- The address or postcode of the job
- Photos by email, if that’s easy
- Access, such as stairs, a lift or height
- The type of property
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, ring 0345 464 0079 or send us an email.
Your questions about bathroom resealing in Swanton
I let a flat near Wateringbury station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Swanton?
Yes. Swanton is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Will it make a mess?
No. The area is protected while we work and cleaned up afterwards.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us and we’re fully insured.
Where are you based?
We’re a Crawley-based firm. Our area covers South East England, London and Scotland.
Is it OK to put new sealant on top of the old bead?
No. It’s a common reason for reseals failing. We cut out all of the old sealant, clean the joint and start again.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
What sealant do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
How to look after the new joints
So the new joints stay in good condition:
- Dry worktop joints after washing up
- Squeegee the walls and tray after use
- Run the extractor fan during and after every shower
- Use gentle cleaners on the silicone
Wipe up standing water along the worktop joint and keep hot pans off the bead. The drier the joint stays, the longer it lasts.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. Any of these means the joint needs attention.
When to call us in Swanton
Baths and trays move. An acrylic bath flexes under load, while a poorly supported tray can shift underfoot. That movement works at the bead until it splits or peels away.
Any of these means the joints need attention:
- A reseal done over the top of the old bead
- Smears of silicone across the tiles
- Gaps where the bath or tray has moved
- Leaks into the floor or ceiling below
For site and facilities teams at buildings such as Mereworth Community Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- The length of the guarantee
- How the surfaces are prepared before sealing
- How hidden problems are handled
- Whether you can choose the colour
Should I try it myself first?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.