Greater London · England

Bathroom & kitchen resealing in Strand-on-the-Green, Greater London

Our applicators work in Strand-on-the-Green on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.

  • Black spots spreading through the bead
  • Gaps between the worktop and the wall
  • Splits where the tray meets the wall

Bathroom resealing near Strand-on-the-Green

Bathroom resealing in Strand-on-the-Green

Kitchens need the same care as bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback all take splashes every day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. Typical jobs include gaps between the worktop and the wall and a reseal done over the top of the old bead, across shower trays & enclosures, kitchen worktops & upstands and basins & vanity units.

London homes include a lot of flats, conversions and mansion blocks, so a bathroom is often directly above a neighbour’s ceiling. That makes worn sealant and cracked grout in Strand-on-the-Green more than a cosmetic job.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Place
Strand-on-the-Green (W4, TW9, TW8)
Region
Greater London
Guarantee
A year, on every job
Quotes
A clear price before we start
Telephone
0345 464 0079
Updated
26 October 2026
Sealant gun close-up on a shower enclosure wall joint

Leave it or put it right?

The difference in a professional reseal is mostly what you do not see: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Skip those steps and even the best silicone fails early. Damp from a failed joint spreads quietly in older London brickwork and timber, and by the time it shows on a wall or ceiling in Strand-on-the-Green, the repair is bigger than the sealant job would have been.

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or email us.

Why book with us

  • Homes, businesses and hotels
  • Every job guaranteed for a year
  • Colour agreed with you before we start
  • Tidy, careful work

Take a look at our cost guide or customer reviews.

For landlords and businesses

Letting agents and landlords in Strand-on-the-Green can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for.

From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

Looking after it afterwards

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Keep scourers and sharp tools away from the bead
  • Keep the fan on for a while after bathing
  • Keep an eye on the corners, where splits start
  • Dry the bead with a towel now and then

Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the bead dries out between uses.

Do not wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.

Should I try it myself first?

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

What we do, step by step

The work is kept neat and contained to the joints we are treating, so you can get on with your day. Expect the work to take two to three hours for a typical bath, depending on how much old sealant there is. In Strand-on-the-Green, flats, stairs and shared entrances are part of the routine. If the building has a concierge, managing agent or access rules, tell us when you book.

  1. We look at every joint first and check for movement or leaks.
  2. Every trace of the old bead is removed, including the thin smear on the tiles.
  3. The joint is cleaned, degreased and treated for mould.
  4. When the joint is dry, and a bath has been filled with water, the new silicone goes on.
  5. The bead is tooled smooth and you are told the cure time, generally around 24 hours.

Getting ready for the visit

  • Keep pets and children clear of the area while we work
  • Tell us about any previous sealing or DIY attempts
  • Mention any tricky access

Get a quote

For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll talk you through the work.

Get a quick quote

Related advice

How the job changes by surface

Baths

Baths move more than any other fitting, so we fill it with water before sealing. The joint is then laid with the bath at its lowest point and isn’t stretched when it’s used.

Basins & vanity units

Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so the joint is sealed in one unbroken line.

Your questions about bathroom resealing in Strand-on-the-Green

Could a tired shower seal in my Strand-on-the-Green flat affect the neighbours below?

Yes, and the first sign is often a stain on the ceiling below. Cutting out the old sealant and laying a new bead early stops it getting that far.

Can parking be tricky for a visit in Strand-on-the-Green?

It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. The visit is then planned around what’s available.

Is it messy?

Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.

Do you work for hotels and businesses?

Yes, regularly. Larger jobs can be planned room by room or area by area to suit the site.

How do I get a quote for bathroom resealing in Strand-on-the-Green?

There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.

What information do you need?

A short description and the location, with pictures by email if possible. If we need more, we will ask.

Is it OK to put new sealant on top of the old bead?

No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.

Do you take out the old sealant first?

Yes, every time. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.

How we quote for bathroom resealing

Some jobs are bigger than they look, and some smaller. What affects the quote:

  • Whether old sealant or filler has to be cut out
  • The amount of work
  • When we can work, for business premises
  • Mould in or behind the old joints

A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.

Asking for a quote

Photos by email are helpful but not essential. Try to tell us:

  • Access, such as stairs, a lift or height
  • Any previous sealing or DIY work
  • The address or postcode of the job
  • The problem you’ve noticed

We do not publish a price list. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or email us.

What bathroom resealing looks like in Strand-on-the-Green

Strand-on-the-Green has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. London’s water is hard, which leaves limescale on sealant, grout and taps.

Rented homes near Chiswick station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. Homes close to St Paul's Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them. If you look after a building such as Strand-on-the-Green Infant and Nursery School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Strand-on-the-Green is about 2 miles south of Acton, in Greater London. Wherever you are in the W4 postcode area, our applicators can take on bathroom resealing. Our area takes in 764 places across Greater London, large and small. We also work in London, about 8 miles from Strand-on-the-Green.

All of W4, TW9 and TW8 is covered for bathroom resealing. Local streets include Kew Road, Maze Road and Kent Road, all of which we cover. Being close to the A3000, Strand-on-the-Green is simple for us to get to for bathroom resealing. Other places close to Strand-on-the-Green include Kew (1 mile south), Grove Park (1 mile east), Gunnersbury (1 mile north), North Sheen (1 mile south) and Turnham Green (1 mile east). Larger places within reach include London (8 miles east), City of Westminster (6 miles east), Marylebone (6 miles east), Kensington (3 miles east), St Pancras (7 miles north-east) and Shoreditch (9 miles east).

Landmarks near Strand-on-the-Green

We work in homes and buildings around Chiswick School, Kew Green and Bull's Head pub and the streets around them. Other local landmarks include Library for Iranian Studies (1.6 miles north) and Kew College Prep (within half a mile south-west). For rail, the closest station is Chiswick station, roughly 0.5 miles south-east. Well-known places in the area include Livat Hammersmith (2.2 miles east) and Barnes Hospital (1.5 miles south-east). The countryside around Strand-on-the-Green includes Richmond Hill and Kew Gardens Lake.

Map of Strand-on-the-Green © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job