Aberdeenshire · Scotland
Strachan Bathroom Resealing
Bathroom resealing across Strachan and nearby, with every bit of old sealant taken out first.
- A reseal done over the top of the old bead
- A bead that has pulled away from the tiles
- A joint torn by a bath that flexes
Can I do it myself?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
About our bathroom resealing in Strachan
The secret of a lasting bead is the preparation. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. We’re often asked to deal with shrunken sealant along the back of a worktop and cracked, shrunken or lifting silicone, across shower trays & enclosures, kitchen worktops & upstands and baths.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
Each job carries a 12-month guarantee.
- Location
- Strachan (AB31)
- Wider area
- Aberdeenshire
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Signs you need bathroom resealing in Strachan
Sealing over old silicone is one of the commonest mistakes we find. Fresh silicone cannot grip the old bead underneath, so it lifts, lets water in and traps mould underneath.
The problems people usually mention when they call are:
- New sealant laid over old sealant that is now lifting
- Mouldy sealant that has gone black
- A bead that has pulled away from the tiles
- Leaks into the floor or ceiling below
In the older streets around Strachan Parish Church And Churchyard, walls and floors in older homes can move, and sealant and grout show it first.
Comparing quotes
- How the joint is cleaned and prepared
- Who does the work, and how experienced they are
- Which colour the sealant will be
- When the joint can take water or movement
What affects the quote in Strachan
Your quote is based on your job. We take into account:
- When we can work, for business premises
- Mould in or behind the old joints
- The number and length of the joints
- The product the joint needs
What you pay reflects the work, not guesswork. That is why we ask a few questions first and give you a clear price before work begins.
Helping us quote
When you call or email, it’s useful to know:
- Roughly how big the job is
- Whether it has been sealed before
- Any access issues, like height or stairs
- Photos by email, if that’s easy
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved.
Leave it or put it right?
Tired sealant is not a reason to replace a bath or shower. A new bead often brings the whole room back, provided the bath, tray and tiles are in good order. If something else is wrong, we will tell you. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Why us?
- 180+ five-star Google reviews
- Trusted Arbo and Everbuild sealants
- White, clear, grey or coloured to suit, where the product allows
- ARBOMaster approved applicator
See our cost guide or our reviews.
Nearby places to Strachan
Other services in Strachan
When it is not the sealant
New sealant cannot fix everything, and we will tell you before any work starts. Sealant will not put right:
- A tray or bath that is cracked through
- Damage behind the tiles that needs a tiler
- Water coming from the plumbing rather than the joint
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
Surfaces we seal
- Kitchen worktops & upstands
- Sinks & splashbacks
- Shower trays & enclosures
- Baths
- Basins & vanity units
- Wet rooms
What we do, step by step
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. In total, it usually takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. For a place like Strachan, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Keep children and pets away from the work area
- For indoor joints, keep the area dry beforehand if you can
- Tell us about any water getting in
Getting a quote
We don’t publish a price list. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.
Advice
Your questions about bathroom resealing in Strachan
What guarantee comes with bathroom resealing in Strachan?
Every job comes with our 12-month guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Is Strachan in your area for bathroom resealing?
Yes. Our work covers the whole of Scotland, and Strachan is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing.
How much does bathroom resealing cost in Strachan?
Every job is different, so each one gets its own quote. For a quick quote, email us at info@mrmastic.co.uk with a short description of the job.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
What should I tell you?
A short description and the location. If we need more, we will ask.
Is it messy?
No. We protect the surfaces around the joints, and we tidy up before we go.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you hold any approvals?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
What bathroom resealing looks like in Strachan
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
In and around Strachan, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Strachan is about 18 miles south-west of Aberdeen, in Aberdeenshire. Our applicators cover bathroom resealing for householders, landlords and businesses in Strachan, as part of our work across Aberdeenshire. Our Aberdeenshire coverage runs to 161 places, and Strachan is one of them. Our Aberdeen page covers work nearby.
Postcode districts we cover here for bathroom resealing: AB31. If you need bathroom resealing at a property on Bowbutts Brae and Feugh View or anywhere close by, our applicators can take on the job. We also cover the places around Strachan: Banchory (3 miles north-east), Inchmarlo (3 miles north), Crossroads (5 miles east), Crathes (5 miles north-east) and Potarch (5 miles north-west). Within a short drive, we also cover Westhill (13 miles north-east), Stonehaven (12 miles east), Kemnay (15 miles north), Laurencekirk (13 miles south), Aboyne (10 miles west) and Newtonhill (14 miles east).
Near you in Strachan
Nearby you will also find Glen O'Dee Hospital (2.8 miles north) and Castlehill of Strachan (1.2 miles west). Open spaces near Strachan include Scolty Hill and Black Loch.
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Keep the fan on for a while after bathing
- Let new sealant cure fully before it gets wet
- Clean with a mild bathroom cleaner and a soft cloth
- Dry the bead with a towel now and then
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.