Hampshire · England
Soberton Heath Bathroom Resealing
Problem with your baths, showers and worktops in Soberton Heath? We cut out the old, prepare the joints and apply the right sealant.
- Water getting behind the bath panel
- Water escaping at the shower enclosure
- Splits where the tray meets the wall
About our bathroom resealing in Soberton Heath
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Soberton Heath. We’re ARBOMaster approved and fully insured, and every job carries our one-year guarantee. If you have cracked, shrunken or lifting silicone and lumpy, uneven sealant from a DIY attempt, we can help.
Homes around Soberton Heath are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
Whatever the size of the job, it’s backed by our 12-month guarantee in Soberton Heath and across Hampshire.
- Where
- Soberton Heath (SO32, PO17)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What bathroom resealing looks like in Soberton Heath
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Church of the Holy Trinity, older homes can move a little, which is hard on rigid grout and tired sealant.
Soberton Heath is about 5 miles north-west of Waterlooville, in Hampshire. We provide bathroom resealing to householders, landlords and businesses in Soberton Heath and nearby. Across Hampshire, we cover 683 places, Soberton Heath among them. We also work in Portsmouth, around 8 miles away.
Every address in SO32 and PO17 is within our area for bathroom resealing, from the main roads to the quietest streets. Local streets include Forester Road, May Bush Lane and Heath Road, and we cover them all. If you are just outside Soberton Heath, we cover Southend (1 mile east), Woodend (1 mile west), Newtown (1 mile south), Kingsmead (1 mile west) and Mislingford (1 mile west). Within a short drive, we also cover Winchester (12 miles north-west), Gosport (8 miles south), Havant (8 miles south-east), Eastleigh (10 miles west), Fareham (6 miles south-west) and Horndean (6 miles east).
Landmarks near Soberton Heath
In Soberton Heath, that means homes and buildings near The Bold Forester Public House, among other places. Well-known places in the area include Bishop's Waltham Museum (3.9 miles north-west) and Knowle Hospital (4.1 miles south-west). The countryside around Soberton Heath includes Portsdown Hill and St Clair's Meadow.
Towns and villages near Soberton Heath
More services for Soberton Heath
What we are called out for in Soberton Heath
The wrong product fails fast. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they crack, discolour or grow mould quickly. Wet areas call for a sanitary silicone with an anti-fungal additive.
The problems people normally mention when they call are:
- Black mould in the silicone that won’t clean off
- Gaps where the bath or tray has moved
- A reseal done over the top of the old bead
- Water escaping at the shower enclosure
If you look after a building such as Newtown Soberton Infant School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Questions to ask before you book
- Whether VAT is included
- How the joint is cleaned and prepared
- What the cure time is
- How hidden problems are handled
How it works
At the end, we look at the finished work together and explain the cure time. The work normally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen, depending on the size of the job. For a village or hamlet like Soberton Heath, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
Preparing for the visit
- On commercial sites, let us know about site rules
- Clear the area around the work
- Plan for the work area to be out of bounds to pets and children
How to get a quote
We quote each job on its own. Simply phone 0345 464 0079 or drop us an email and describe the job, and photos are welcome.
Related advice
FAQs for Soberton Heath
Is Soberton Heath within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you do bathroom resealing in Soberton Heath?
Yes. We work across London and the South East, and Soberton Heath is part of that. You can ring 0345 464 0079 or send us an email and tell us what needs doing, and we will send you a clear quote.
Do you reseal kitchen worktops and sinks too?
Yes, often alongside a bathroom. Next to the sink we use a food-safe product where it’s needed.
How long will the resealing take?
That depends on the number of joints and the state of the old sealant. Allow a couple of hours for a typical bath or shower.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Do you work for landlords and businesses?
Yes, regularly. We can quote for several properties at once.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Does someone need to be in?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Surface by surface
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. Water that gets behind can damage the unit, so a neat, continuous bead matters.
Baths
A bath shifts slightly every time it’s filled, so it’s filled with water before the bead goes on. That way the joint is laid with the bath at its heaviest and isn’t stretched when it’s used.
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
What we can’t put right
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- A tray or bath that is cracked through
- A tray that rocks until it’s re-bedded
- Cracked or missing grout between tiles (that is regrouting)
If you’re not sure, just call 0345 464 0079 or email us and we will give you a straight answer.
Surfaces we seal
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Sinks & splashbacks
- Baths
- Kitchen worktops & upstands
Aftercare tips
Simple care keeps the joints in good condition. We recommend:
- Wait for the cure time we give you
- Do not let bottles sit on the bead
- Open a window or run the fan so the room dries
- Avoid abrasive pads on the sealant
Clean the silicone with care: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
What happens if it’s left?
The difference in a professional reseal is mostly what you don’t see: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Skip those steps and even the best silicone fails early. Around Soberton Heath, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before we start.
Why choose Mr Mastic in Soberton Heath
- Homes, businesses and hotels
- Quality sealants from Arbo and Everbuild
- Anti-fungal silicone where joints get wet
- Colour agreed with you before work begins
Take a look at our cost guide and customer reviews.