Scottish Borders · Scotland
Reston Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Reston and across the Scottish Borders. Fully insured, ARBOMaster approved and guaranteed for a year.
- Black mould in the silicone that will not clean off
- Failed sealant on the screen profile
- Leaks into the floor or ceiling below
About our bathroom resealing in Reston
Before a bath is sealed, it’s filled with water. A full bath sits slightly lower than an empty one, so the bead isn’t stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. If you have a reseal done over the top of the old bead and leaking joints on a shower screen, we can help, on basins & vanity units, shower trays & enclosures and baths alike.
Bathrooms in smaller places like Reston work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
Whatever the size of the job, it’s backed by our 12-month guarantee in Reston and across the Scottish Borders.
- Location
- Reston (TD14)
- Wider area
- Scottish Borders
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Looking after it afterwards
Good habits help new joints last longer. Our tips:
- Never pick at the silicone with a blade
- Wait for the cure time we give you
- Open a window or run the fan so the room dries
- Dry worktop joints after washing up
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Also near Reston
More services for Reston
Quotes for bathroom resealing in Reston
Your quote is based on your job. We take into account:
- The number of rooms or windows
- The product the joint needs
- Mould in or behind the old joints
- The number and length of the joints
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, email us at info@mrmastic.co.uk and we will give you an honest view and a quote.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Where the property is
- A few photos by email, if you can
- If someone has resealed it before
- What the problem is, such as mould, gaps, leaks or cracking
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you are ready, send an email to info@mrmastic.co.uk.
Common questions in Reston
Can you do bathroom resealing in Reston?
Yes, Reston is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Can you help a landlord with a rental near Reston station?
Yes, landlords and agents are among the people we work for. You can send an email to info@mrmastic.co.uk with the details for a clear quote.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little.
Where do you work from?
Our base is Crawley. Our area covers South East England, London and Scotland.
Can I choose the colour of the sealant?
White and clear are the most common choices, and other colours are available to suit tiles, trays and worktops. Tell us what you’d like when you get in touch.
Can you do several jobs on one visit?
Yes. Just list everything you need and you will get one quote.
Can you work on commercial sites?
Yes. Larger jobs can be planned room by room or area by area to suit the site.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in.
The process
The work is kept neat and contained to the area we’re working on. Expect the work to take around two hours for one bath or shower, longer for a whole bathroom, and we explain the cure time before we leave. For a place like Reston, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- Move anything stored near the joints
- Let us know if you’ve seen damp or leaks
Get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, drop us a line at info@mrmastic.co.uk.
Related advice
When to call us in Reston
No sealant lasts indefinitely. Daily water, heat and cleaning products slowly wear it down, and how long it lasts comes down to use, cleaning and ventilation.
Signs it’s time to call us include:
- Cracked, shrunken or lifting silicone
- Two layers of silicone, both failing
- Splits where the tray meets the wall
- Mouldy sealant that has gone black
For an older house near a landmark such as Reston Church Of Scotland, older homes can move a little, which is hard on rigid grout and tired sealant.
Before you book anyone
- Whether they’re fully insured
- Whether all the old sealant comes out first
- Is VAT in the price?
- How hidden problems are handled
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Cracked or missing grout between tiles (that’s regrouting)
- A tray or bath that’s cracked through
- Water coming from the plumbing rather than the joint
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Sinks & splashbacks
- Wet rooms
- Basins & vanity units
- Baths
- Shower trays & enclosures
How the job changes by surface
Shower trays & enclosures
There are normally two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both take water every day, so each is cut out and renewed with anti-fungal sanitary silicone.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Corners behind basins are where mould tends to start, so it’s cut out and renewed just like a bath joint.
What bathroom resealing looks like in Reston
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
For landlords with property near Reston station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Reston is in the Scottish Borders. Across the TD14 area, our applicators can take on bathroom resealing. Our area takes in 89 places across the Scottish Borders, from the larger towns to small villages. Our Edinburgh page covers work nearby, about 40 miles away.
Our applicators cover all of TD14 for bathroom resealing and the streets around it. Whether your property is on Main Street, Ladeside and Newmains Farm Road or anywhere close by, we can help. Close by, we work in Ayton (3 miles east), Coldingham (3 miles north-east), Scottish Borders (3 miles north-east), Chirnside (4 miles south) and St Abbs (4 miles north-east).
Around Reston
Reston has its own railway station: Reston station. A little further out are Ferney Castle (1.2 miles south). For a walk, there’s Ayton Hill and Coldingham Loch.