Hampshire · England

Bathroom Resealing in Pennington

Professional bathroom resealing in and around Pennington, with old sealant always removed completely.

  • Black mould in the silicone that won’t clean off
  • Gaps between the worktop and the wall
  • Cracked, shrunken or lifting silicone

Need bathroom resealing in Pennington?

Bathroom resealing for homes and businesses in Pennington

Showers work their sealant harder than baths. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on kitchen worktops & upstands, wet rooms and sinks & splashbacks, and people most often call us about two layers of silicone, both failing and leaking joints on a shower screen.

Around Pennington, you will mostly find houses and bungalows, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.

We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.

Where
Pennington (SO41)
Region
Hampshire
Guarantee
A year, on every job
Price
A clear quote up front
Call
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles

FAQs for Pennington

Is Pennington within the area you cover?

Yes, Pennington is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Do you work in hotels near Pennington?

Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.

Which products do you use?

Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.

Do you remove the old sealant?

Yes. All of the old material is cut out and the joint cleaned before applying anything new.

Should I try DIY first?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

Can you just seal over the old silicone?

No, never. A bead laid over old silicone soon starts to come away. Every trace of the old bead is removed first.

How long will the resealing take?

That depends on the number of joints and the state of the old sealant. For most single baths or showers, allow a couple of hours.

Can I choose the colour of the sealant?

There’s a choice: clear, white and colours chosen to suit the room. We can help you pick when we quote.

For landlords and businesses

We work for letting agents and landlords as well as householders. Sealant work between tenants is a simple way to keep a property in good order.

From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

How we quote for bathroom resealing

Some jobs are bigger than they look, and some smaller. What affects the quote:

  • The number and length of the joints
  • Mould in or behind the old joints
  • How many areas need sealing
  • Whether old sealant or filler has to be cut out

Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

What we need to know

Before you ask for a quote, have a think about:

  • Roughly how big the job is
  • What the problem is, such as mould, gaps, leaks or cracking
  • Photos by email, if that’s easy
  • Any previous sealing or DIY work

To get a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.

What happens if it’s left?

A clean new bead makes a room look cared for, which matters if you’re letting a property or selling it. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. In a smaller place like Pennington, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.

No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.

Why choose Mr Mastic in Pennington

  • Homes, businesses and hotels
  • You choose the colour before work begins
  • Anti-fungal silicone where joints get wet
  • Tidy, careful work

Take a look at what affects the cost and what customers say.

What the job involves on each surface

Kitchen worktops & upstands

Upstands and back edges are cut out, cleaned of grease and resealed, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.

Shower trays & enclosures

The vertical joint where a screen profile meets the wall is a common leak point. We reseal it along with the base of the enclosure, sealing the side the enclosure’s instructions call for.

What sealant work cannot fix

Some problems need a builder, plumber or other trade rather than us:

  • A leaking waste, trap or valve
  • Tiles that have come away from the wall
  • Cracks in the tray itself rather than the joint

If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.

Surfaces we seal

  • Basins & vanity units
  • Sinks & splashbacks
  • Shower trays & enclosures
  • Wet rooms
  • Kitchen worktops & upstands
  • Baths

How the visit works

We bring everything the job needs with us. After a quick look at the joints together, the area is protected and the work begins. Most jobs take two to three hours for a typical bath, depending on how much old sealant there is. For a job in Pennington, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.

  1. First, each joint is checked for movement and signs of water.
  2. The old silicone is cut out completely, along with the film it leaves on the tiles.
  3. The joint is cleaned, degreased and treated for mould.
  4. When the joint is dry, and a bath has been filled with water, the new silicone goes on.
  5. We tool the bead to a neat finish and give you the cure time, generally around 24 hours.

Getting ready for the visit

  • Let us know about stairs, lifts or work at height
  • For business premises, tell us about site rules or sign-in
  • Tell us about any previous sealing or DIY attempts

Getting a quote

The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.

Get a quick quote

Advice

When to call us in Pennington

Silicone does not last for ever. Every shower, every splash and every wipe with a cleaner slowly wear it down, so its life depends on how the room is used, cleaned and aired.

It’s worth asking for a quote if you see:

  • Leaking joints on a shower screen
  • Damp behind the bath or under the tray
  • Two layers of silicone, both failing
  • A bead that has pulled away from the tiles

If you live in an older home near Church of St Mark, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Questions to ask before you book

  • What the cure time is
  • How much experience the applicator has
  • Whether you can choose the colour
  • Are they insured?

Our hiring checklist

Bathrooms and kitchens in Pennington

Pennington is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Pennington has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.

For landlords with property near Lymington Town station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For site and facilities teams at buildings such as Priestlands School, we reseal washrooms and kitchens in schools and businesses as well as homes.

Pennington is about 1 mile south-west of Lymington, in Hampshire. Our applicators cover bathroom resealing for homeowners, landlords and businesses in Pennington, as part of our work across Hampshire. Pennington is one of 683 towns and villages in Hampshire we cover for bathroom resealing. Southampton is on our list too, around 14 miles away.

We cover every part of SO41 for bathroom resealing. If you need bathroom resealing at a property on Mead Road, Pound Road and Elm Avenue or a nearby road, we can help. Other places close to Pennington include Lymington (1 mile north-east), Lower Pennington (1 mile south), Walhampton (1 mile north-east), Everton (1 mile west) and Lymore (2 miles south-west). Within a short drive, we also cover Totton (12 miles north), Hythe (10 miles north-east), New Milton (5 miles west), Ringwood (12 miles north-west), Locks Heath (15 miles north-east) and Warsash (14 miles north-east).

Local landmarks in Pennington

We work in homes and buildings around Pennington Infant School and White Hart Inn and the streets around them. Pennington’s nearest station is Lymington Town station, roughly 1.2 miles north-east of the centre. Other landmarks nearby include St Barbe Museum and Art Gallery (0.9 miles north-east) and Yarmouth Castle (3.9 miles south-east). Green spaces nearby include Lymington and Keyhaven Marshes Nature Reserve.

Map of Pennington © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job