Surrey · England
Peaslake Bathroom Resealing
Bathroom resealing for Peaslake and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Smears of silicone across the tiles
- A joint torn by a bath that flexes
- Black mould in the silicone that won’t clean off
Bathroom resealing in Peaslake: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St Mark, older homes can move a little, which is hard on rigid grout and tired sealant.
Peaslake is about 6 miles south-west of Dorking, in Surrey. We carry out bathroom resealing for householders, landlords and businesses in Peaslake and nearby. Peaslake is one of 395 towns and villages in Surrey where we work for bathroom resealing. Crawley is on our list too, around 12 miles away.
Work in GU5 works the same way as everywhere else we cover. You’ll find streets such as Pond Lane, Peaslake Lane and Walking Bottom. Close by, we work in Holmbury St Mary (1 mile east), Farley Green (2 miles west), Pitland Street (2 miles east), Ewhurst (3 miles south) and Ewhurst Green (3 miles south). Within a short drive, we also cover Guildford (7 miles north-west), Woking (10 miles north-west), Epsom (12 miles north-east), Horley (12 miles east), Redhill (12 miles east) and Farnham (15 miles west).
What’s near Peaslake
Peaslake’s nearest station is Gomshall station, roughly 1.8 miles north of the centre. A little further out are Abinger Castle (1.8 miles east) and St. Luke’s Hospital (5.8 miles north-west). For a walk, there’s Combe Bottom and Leith Hill.
About our bathroom resealing in Peaslake
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through and into the wall or floor. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. We are often asked to deal with damp behind the bath or under the tray and two layers of silicone, both failing, on baths, wet rooms and sinks & splashbacks.
Somewhere as small as Peaslake, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
The work is covered for a year after we finish. If anything isn’t right with it, ring 0345 464 0079 or drop us an email.
- Place
- Peaslake (GU5)
- Wider area
- Surrey
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
The process
On the day, we look over the joints with you first, so you know exactly what we are doing. We protect the surfaces around the joints before any work begins. The work normally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere like Peaslake needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
Preparing for the visit
- On commercial sites, let us know about site rules
- Move anything stored near the joints
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, phone 0345 464 0079 or email us.
Read more
Common problems we fix in Peaslake
With age, silicone loses its stretch. In kitchens it often shrinks away from the back edge, leaving a thin gap where water and food collect. Heat from the hob and strong sprays speed it along.
The most common problems we see are:
- Two layers of silicone, both failing
- Smears of silicone across the tiles
- A bead that has pulled away from the tiles
- Splits where the tray meets the wall
For landlords with property near Gomshall station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Before you book anyone
- How long to leave it before use
- Whether they’re fully insured
- Is the old sealant removed completely?
- What happens if they find a problem under the old sealant
For landlords and businesses
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
For anyone letting property in or around Peaslake, several properties can be quoted together. Just tell us the addresses and what each one needs.
Surface by surface
Shower trays & enclosures
Shower trays are sealed to the wall, and enclosures are sealed to the tray and tiles. Both get soaked every time the shower runs, so each is cut out and renewed with anti-fungal sanitary silicone.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Old sealant there often goes black at the corners, and we treat it exactly as we would a bath.
Why act early in Peaslake
Sorting it now is quick: it takes a morning or an afternoon for most single baths and showers. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Older cottages and farmhouses around Peaslake can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
What you get with us
- Old sealant always removed completely
- Anti-fungal silicone where joints get wet
- 4.9 on Google from 180+ five-star reviews
- Colour picked to suit the job
Nearby places to Peaslake
Other services in Peaslake
Your questions about bathroom resealing in Peaslake
Can you help a landlord with a rental near Gomshall station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we will send you a clear quote.
Do you cover Peaslake for bathroom resealing?
Yes. We work across London and the South East, and Peaslake is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.
Are you fully insured?
Yes. We’re fully insured, and we’ve been doing sealant work for more than 20 years.
What does bathroom resealing cost?
Every job is different, so each one gets its own quote. For a quick quote, call 0345 464 0079 or send us an email with a short description of the job.
How long does it take to reseal a bath or shower?
It depends on how many joints there are and how much old sealant has to come out. For most single baths or showers, allow a couple of hours.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access.
Can I choose the colour of the sealant?
There’s a choice: clear, white and colours chosen to suit the room. We will talk it through when we quote.
What should I tell you?
Only a few details: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or email us.
Quotes for bathroom resealing in Peaslake
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How many areas need sealing
- The amount of work
- How easy the joints are to reach
- Whether there’s mould to deal with
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- The rough size of the job
- Whether it’s a home or a business
- The problem you’ve noticed
- Where the property is
We quote each job on its own, so start by telling us what you need. Simply call 0345 464 0079 or drop us an email and describe the job and send pictures if you have them.