Kent · England
Little Chart Forstal Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Little Chart Forstal. Fully insured, ARBOMaster approved and guaranteed for a year.
- Water getting behind the kitchen upstand
- Black mould in the silicone that will not clean off
- Cracked, shrunken or lifting silicone
Little Chart Forstal homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as St Mary, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Little Chart Forstal is about 4 miles north-west of Ashford, in Kent. We provide bathroom resealing to homeowners, landlords and businesses in Little Chart Forstal and the surrounding area, as part of our work across Kent. 922 places in Kent are on our list, from the larger towns to small villages. We also work in Chelmsford, about 41 miles from Little Chart Forstal.
Every address in TN27 is within our area for bathroom resealing. Other places close to Little Chart Forstal include Little Chart (1 mile west), Pluckley (2 miles west), Fir Toll (2 miles west), Pluckley Thorne (2 miles west) and Chambers' Green (2 miles south-west). We also work in nearby towns such as Maidstone (13 miles north-west), Ashford (4 miles south-east), Canterbury (14 miles north-east), Sittingbourne (12 miles north), Faversham (10 miles north-east) and Hythe (15 miles south-east).
Around Little Chart Forstal
We work in homes and buildings around The Swan Inn And Former Stables, among other places. The nearest railway station is Charing station, roughly 2.1 miles north of the centre. Nearby you’ll also find Romden Castle (4.1 miles south-west) and William Harvey Hospital (5.9 miles south-east).
About our bathroom resealing in Little Chart Forstal
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Little Chart Forstal. We’re ARBOMaster approved and fully insured, and every job carries our 12-month guarantee. If you have black spots spreading through the bead and failed sealant on the screen profile, we can put it right, on kitchen worktops & upstands, baths and shower trays & enclosures alike.
Somewhere as small as Little Chart Forstal, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Every job comes with a one-year guarantee, wherever you are in Kent.
- Location
- Little Chart Forstal (TN27)
- Wider area
- Kent
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What we can’t put right
We won’t take on work that will not last, so here’s what sealant can’t put right:
- A bath or tray that moves because it is not properly supported
- A cracked shower tray or bath (that needs repair or replacement)
- Loose or hollow tiles, or failed tanking behind them
If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.
Surfaces we seal
- Kitchen worktops & upstands
- Shower trays & enclosures
- Baths
- Wet rooms
- Sinks & splashbacks
- Basins & vanity units
How we quote for bathroom resealing
Your quote is based on your job. We take into account:
- The product the joint needs
- Any mould that needs treating
- When we can work, for business premises
- How many areas need sealing
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Roughly how big the job is
- How we’d reach the joints
- The type of property
- If someone has resealed it before
Every job is quoted individually, so start by telling us what you need. Simply ring 0345 464 0079 or send us an email and describe the job and send photos if you have them.
How the visit works
A visit follows a simple pattern: we look at the joints together, protect the area around them, carry out the job and clear up. Most jobs take a couple of hours for a single bath or shower. Somewhere as small as Little Chart Forstal, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any water getting in
- Mention if the joints have been sealed before
Getting a quote
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we’ll talk you through the work before giving you a price.
Related advice
Landlord and commercial work in Little Chart Forstal
If you manage several properties in or around Little Chart Forstal, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and photos by email help.
Landlords and agents in Little Chart Forstal can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for.
Common problems we fix in Little Chart Forstal
Plenty of failed sealant has been laid over the top of older sealant. New silicone will not bond to old silicone, so it peels, leaks and hides mould behind it.
Signs it’s time to call us include:
- Black mould in the silicone that will not clean off
- Sealant that has split, shrunk or peeled away
- Leaks into the floor or ceiling below
- A reseal done over the top of the old bead
If you let a flat or house near Charing station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Comparing quotes
- What happens if they find a problem under the old sealant
- Whether they seal over old material or remove it
- The length of the guarantee
- Whether you can choose the colour
Looking after it afterwards
Looking after new joints is easy:
- Stick to a soft cloth and a mild cleaner
- Wipe the sealant dry after showering
- Never pick at the silicone with a blade
- Move toiletries away from the joint
Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
Questions from Little Chart Forstal
I let a flat near Charing station. Can you help?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.
Do you cover Little Chart Forstal for bathroom resealing?
Yes, Little Chart Forstal is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.
Do you remove the old sealant?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Where are you based?
Mr Mastic is based in Crawley. We cover Little Chart Forstal and the rest of Kent, along with the rest of our area.
Do you do kitchens as well as bathrooms?
Yes. Next to the sink we use a food-safe product where it’s needed.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Are you insured?
Yes. We’re fully insured.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status and we are fully insured too.
Places near Little Chart Forstal
Also in Little Chart Forstal
DIY versus a professional finish
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.