East Sussex · England
Bathroom & kitchen resealing in Kent Street, East Sussex
Bathroom resealing for Kent Street, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Sealant that has split, shrunk or peeled away
- Smears of silicone across the tiles
- New sealant laid over old sealant that is now lifting
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
About our bathroom resealing in Kent Street
A bead that has gone black, split or come away shouldn’t be left until there’s a leak. Just ring 0345 464 0079 or send us an email with a photo of the joints, and we’ll give you a clear price for bathroom resealing in Kent Street. Common call-outs are for water escaping at the shower enclosure and a messy, uneven bead from a previous reseal, on wet rooms, kitchen worktops & upstands and sinks & splashbacks.
Being in a small place like Kent Street makes no difference to the job itself: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
All our work is covered by a 12-month guarantee, wherever you are in East Sussex.

- Place
- Kent Street (TN33)
- Region
- East Sussex
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Common problems we fix in Kent Street
No sealant lasts indefinitely. Daily water, heat and cleaning products slowly wear it down, so its life depends on how the room is used, cleaned and aired.
The most common problems we see are:
- Water getting behind the bath panel
- A joint torn by a bath that flexes
- Two layers of silicone, both failing
- Water escaping at the shower enclosure
If you look after a building such as Ark Helenswood Academy, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- Whether they seal over old material or remove it
- What product goes in the joint
- What the cure time is
- What happens if the job turns out different
What we can’t put right
To be straight with you, some problems need a different trade:
- Cracked or missing grout between tiles (that is regrouting)
- A bath or tray that moves because it isn’t properly supported
- Damage behind the tiles that needs a tiler
If you are not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer.
Joints and surfaces we work on
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
- Sinks & splashbacks
- Shower trays & enclosures
- Baths
How to look after the new joints
A little care helps the new joints last. Our advice:
- Avoid abrasive pads on the sealant
- Squeegee the walls and tray after use
- Use gentle cleaners on the silicone
- Don’t leave water standing on kitchen joints
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the bead dries out between uses.
Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.
Kent Street homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For landlords with property near Battle station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Kent Street is about 3 miles north of Hastings, in East Sussex. Whether you’re in the middle of Kent Street or further out, bathroom resealing is available for homes and businesses alike, from flats and houses to offices and hotels. We cover 289 towns and villages across East Sussex. There’s also a page for Brighton, roughly 30 miles from Kent Street.
Jobs for bathroom resealing in TN33 is quoted and booked the same way as anywhere else. We also cover Westfield (1 mile east), Telham (2 miles west), Sedlescombe (2 miles north), Whatlington (2 miles north-west) and Brede (3 miles north-east). We also work in nearby towns such as Eastbourne (14 miles south-west), Hastings (3 miles south), Bexhill-on-Sea (6 miles south-west), Hailsham (13 miles west), St Leonards (4 miles south) and Polegate (14 miles south-west).
What’s near Kent Street
Kent Street’s nearest station is Battle station, roughly 2.2 miles west. Nearby you’ll also find Hastings Castle (4.3 miles south-east) and Conquest Hospital (2.2 miles south-east). Green spaces nearby include Senlac Hill and Church Wood and Robsack Wood.
Questions from Kent Street
I let a flat near Battle station. Can you help?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before work begins.
Can you do bathroom resealing in Kent Street?
Yes, Kent Street is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
When can I use the bath or shower again?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
Where are you based?
Our base is Crawley. Our area covers South East England, London and Scotland.
Do you do commercial work?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. We can talk about working times when we quote.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Is it OK to put new sealant on top of the old bead?
No, never. A bead laid over old silicone soon starts to come away. We remove the old bead completely before resealing.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Towns and villages near Kent Street
Also in Kent Street
Why deal with it now?
Dealing with sealant early is a short job: the work takes half a day or less for one room, longer when the kitchen is included. Left until water gets through, the job can grow to lifting panels, drying out and decorating. Around Kent Street, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before work begins.
Why Kent Street clients choose us
- Trusted Arbo and Everbuild sealants
- Old sealant always removed completely
- Sanitary silicone with an anti-fungal additive in wet areas
- Experience in homes, commercial sites and hotels
Read our cost guide or our reviews.
How the visit works
The work is kept neat and contained to the area we are working on, so you can get on with your day. Expect the work to take two to three hours for a typical bath, depending on how much old sealant there is, and we tell you how long to leave it before we go. Somewhere like Kent Street needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Preparing for the visit
- Clear the area around the work
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
We quote each job on its own, so the first step is telling us about yours. Just phone 0345 464 0079 or send us an email with the details.
Advice
For landlords and businesses
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
We work for landlords and letting agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
