Hampshire · England
Bathroom Resealing in Inhurst
Problem with your baths, showers and worktops in Inhurst? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Gaps between the worktop and the wall
- Lumpy, uneven sealant from a DIY attempt
- Black mould in the silicone that will not clean off
What we are called out for in Inhurst
The wrong product fails fast. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
Keep an eye out for any of the following:
- Splits where the tray meets the wall
- Water escaping at the shower enclosure
- Mouldy sealant that has gone black
- Two layers of silicone, both failing
Managing a site like The Hurst School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before booking anyone
- Are they insured?
- When the joint can take water or movement
- Which colour the sealant will be
- What happens if the job turns out different
Bathroom resealing for homes and businesses in Inhurst
A bead that has gone black, split or come away is worth sorting before it lets water through. Just call 0345 464 0079 or email us with a photo of the joints, and you’ll get a clear quote before any work starts. Common call-outs are for splits where the tray meets the wall and water escaping at the shower enclosure, on shower trays & enclosures, sinks & splashbacks and wet rooms.
Homes around Inhurst are mostly houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
Whatever the size of the job, it’s backed by our 12-month guarantee in Inhurst and across Hampshire.
- Place
- Inhurst (RG26)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Leave it or put it right?
Sorting it now is quick: it takes a couple of hours for a single bath or shower. Left until water gets through, the job can grow to lifting panels, drying out and decorating. Around Inhurst, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
The cost depends on the amount of work, how hard the old material is to remove and access to the work. We give a clear quote before we start.
Why us?
- Rated 4.9 stars on Google
- Old sealant always removed completely
- Sanitary silicone with an anti-fungal additive in wet areas
- A choice of colours where the product allows
Take a look at how sealant jobs are priced or what customers say.
What affects the cost of bathroom resealing
Call for a quick quote. What matters most is:
- Mould in or behind the old joints
- Whether the work is at height
- When we can work, for business premises
- The old material and how stubborn it is
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first.
Helping us quote
What to tell us when you ask for a quote:
- How we’d reach the joints
- A few photos by email, if you can
- Whether it has been sealed before
- Where the property is
To get a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We will give you a clear quote before any work starts.
For landlords and businesses
Housing providers, facilities teams and property managers book us too in Inhurst and across Hampshire. Several sites can be quoted together, and we’re fully insured for the work.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Run the extractor fan during and after every shower
- Move toiletries away from the joint
- Squeegee the walls and tray after use
- Avoid abrasive pads on the sealant
Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.
Don’t wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.
Bathroom resealing around Inhurst
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Midgham station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For an older house near a landmark such as Saint Mary's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Inhurst is about 2 miles west of Tadley, in Hampshire. We provide bathroom resealing to householders, landlords and businesses in Inhurst. Our Hampshire coverage runs to 683 places, Inhurst among them. There’s also a page for Reading, about 11 miles away.
Postcode districts we cover here for bathroom resealing: RG26. Whether your property is on Inhurst Lane, Stokes Lane and Brimpton Road or anywhere close by, we can help. We also cover the places around Inhurst: Heath End (1 mile north-east), Baughurst (1 mile south-east), Axmansford (1 mile south), Brimpton Common (1 mile north-west) and Tadley (2 miles east). Within a short drive, we also cover Basingstoke (7 miles south-east), Yateley (15 miles east), Hook (11 miles south-east), Popley (6 miles south-east), Kempshott (8 miles south) and Oakridge (7 miles south-east).
Local landmarks in Inhurst
In Inhurst, that means homes and buildings near Burnham Copse Primary School. The closest station to Inhurst is Midgham station, roughly 2.8 miles north of the centre. Other landmarks nearby include Park Prewett Hospital (5.8 miles south-east) and Calleva Museum (3.5 miles east). Not far away are Thatcham Reed Beds.
Inhurst questions
Is Inhurst within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Midgham station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you do commercial work?
Yes. Commercial and hotel work is a large part of what we do. Working times can be discussed when we quote.
Does the resealing come with a guarantee?
Yes. Our one-year guarantee covers every job, and we’re ARBOMaster approved applicators.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator.
Do the sealants smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
Do I have to be there?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
How long does the new silicone need before I use the shower?
Normally after around 24 hours. We’ll tell you the cure time for the product we used.
Also near Inhurst
Other services in Inhurst
Should I try it myself first?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
What we do, step by step
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes a morning or an afternoon for most single baths and showers. Somewhere like Inhurst needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, generally around 24 hours.
Preparing for the visit
- On commercial sites, let us know about site rules
- Let us know about stairs, lifts or work at height
- Mention any parking rules near the property
Ask for a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. When it suits you, phone 0345 464 0079 or drop us an email.