Hampshire · England
Bathroom & kitchen resealing in Hiltingbury, Hampshire
Professional bathroom resealing in and around Hiltingbury, with old sealant always removed completely.
- Leaking joints on a shower screen
- Lumpy, uneven sealant from a DIY attempt
- Black spots spreading through the bead
Bathroom resealing in Hiltingbury, done properly
Sealant that is mouldy, cracked or peeling is worth sorting before it lets water through. Just call 0345 464 0079 or send us an email with a photo of the joints, and you’ll get a clear quote before any work starts. Common call-outs are for new sealant laid over old sealant that is now lifting and a bead that has pulled away from the tiles, across kitchen worktops & upstands, basins & vanity units and baths.
In and around Hiltingbury, older properties sit alongside newer ones. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Where
- Hiltingbury (SO53, SO52, SO51)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Honest limits
To be straight with you, there are a few things sealant won’t fix:
- A leaking waste, trap or valve
- Loose or hollow tiles, or failed tanking behind them
- A tray that rocks until it’s re-bedded
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think before booking.
Surfaces we seal
- Basins & vanity units
- Kitchen worktops & upstands
- Sinks & splashbacks
- Baths
- Wet rooms
- Shower trays & enclosures
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Nearby places to Hiltingbury
More services for Hiltingbury
Hiltingbury homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Hiltingbury Junior School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you let a flat or house near Chandlers Ford station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For an older house near a landmark such as St. Martin in the Woods, walls and floors in older homes can move, and sealant and grout show it first.
Hiltingbury is about 1 mile north of Chandler's Ford, in Hampshire. Every kind of property in Hiltingbury can book us for bathroom resealing, old or new, large or small. Every job comes with our 12-month guarantee. Hiltingbury is one of 683 places in Hampshire we cover for bathroom resealing. Southampton is on our list too, about 6 miles from Hiltingbury.
Postcode districts we cover here for bathroom resealing: SO53, SO52 and SO51. That includes homes and businesses on Pine Road, Beech Road and Common Road. If you’re just outside Hiltingbury, we cover Chandler's Ford (1 mile south), Allbrook (1 mile south-east), Boyatt Wood (2 miles south-east), Highbridge (2 miles east) and Lord's Wood (3 miles east). Further out, we also cover Winchester (5 miles north-east), Eastleigh (3 miles south-east), Fareham (13 miles south-east), Andover (15 miles north), Totton (8 miles south-west) and Hedge End (7 miles south-east).
Local landmarks in Hiltingbury
Around Hiltingbury, our work takes us to homes and buildings near Thornden School and Thornden School, among other places. The closest station to Hiltingbury is Chandlers Ford station, roughly 1 mile south of the centre. Other landmarks nearby include Eastleigh Museum (2.5 miles south-east) and Romsey Community Hospital (4.2 miles west). Green spaces nearby include Flexford Nature Reserve.
Quotes for bathroom resealing in Hiltingbury
Call for a quick quote. What matters most is:
- How easy the joints are to reach
- How much there is to do
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- Photos by email, if that is easy
- Whether it’s a home or a business
- Any access issues, like height or stairs
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Why act early in Hiltingbury
Running new silicone over the old joint can look tidy for a few weeks, but it cannot stick to what’s underneath. It lifts, traps water and grows mould behind it. Homes in smaller places like Hiltingbury can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Doing several joints on one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. We’ll give you a clear price for the lot.
Why choose Mr Mastic in Hiltingbury
- Fully insured
- Sealant colour chosen to suit
- Experience in homes, commercial sites and hotels
- Trusted Arbo and Everbuild sealants
See our cost guide and customer reviews.
Looking after it afterwards
So the new joints stay in good condition:
- Keep scourers and sharp tools away from the bead
- Stick to a soft cloth and a mild cleaner
- Keep the fan on for a while after bathing
- Dry the bead with a towel now and then
In a kitchen, do not let water sit along the back of the worktop and keep hot pans off the bead. The drier the joint stays, the longer it lasts.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
Hiltingbury: your questions answered
Do you work for landlords with property near Chandlers Ford station?
Yes, we work for letting agents and landlords. You can ring 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Is Hiltingbury within the area you cover?
Yes. Hiltingbury is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access.
Can I add another job to the visit?
Of course. Combining jobs makes good use of the visit.
Do you remove the old sealant?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Do the sealants smell?
That depends on the sealant. Some smell for a while, some hardly at all.
What should I tell you?
The location, the problem and the rough size of the job. If you can, email a few photos.
Are you fully insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
What happens on the day
Once we’re on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes two to three hours for a typical bath, depending on how much old sealant there is. A visit to Hiltingbury is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Move anything stored near the joints
- Let us know if you’ve seen damp or leaks
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and send you a clear quote.
Related advice
What the job involves on each surface
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. We renew it in clear, white or a matched colour.
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so a neat, continuous bead matters.