Kent · England
Bathroom Resealing in Henhurst
Professional bathroom resealing in and around Henhurst, with every bit of old sealant taken out first.
- Two layers of silicone, both failing
- Water escaping at the shower enclosure
- Cracked, shrunken or lifting silicone
Bathroom resealing in Henhurst, done properly
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a neat new joint puts that right in a short visit. Just as important, it closes the gaps water would otherwise get through. Typical jobs include smears of silicone across the tiles and two layers of silicone, both failing, on sinks & splashbacks, kitchen worktops & upstands and basins & vanity units.
Being in a small place like Henhurst makes no difference to the job itself: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or email us.
- Where
- Henhurst (DA12)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Questions from Henhurst
I let a flat near Sole Street station. Can you help?
Yes, we work for landlords and letting agents. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.
Will you come out to Henhurst?
Yes. Henhurst is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
How do I get a quote for bathroom resealing in Henhurst?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we’ll talk you through it.
What should I tell you?
A short description and the location. We’ll ask anything else we need to know.
Is it messy?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Do you work for hotels and businesses?
Yes. We work in offices, washrooms, hotels and other commercial premises. We can talk about working times when we quote.
Do you reseal kitchen worktops and sinks too?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
For landlords and businesses
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together, and we’re fully insured.
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Why act early in Henhurst
Fresh sealant smartens a bathroom or kitchen with very little disruption, which matters if you are letting a property or selling it. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. Around Henhurst, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Doing several joints on one visit normally makes better use of the time than several visits. We will give you a clear quote for the lot.
What you get with us
- Full insurance on every job
- Colour agreed with you before work begins
- Quality sealants from Arbo and Everbuild
- Over 20 years’ experience
Take a look at what affects the cost and customer reviews.
Bathrooms and kitchens in Henhurst
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St Margaret, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you look after a building such as Singlewell Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Henhurst is about 2 miles south of Gravesend, in Kent. Anywhere in DA12, we can carry out bathroom resealing at your property. Across Kent, we cover 922 places, and Henhurst is one of them. For nearby work, see our London page.
All of DA12 is within our area for bathroom resealing, from the main roads to the quietest streets. We also cover the places around Henhurst: Singlewell or Ifield (1 mile north-west), Istead Rise (1 mile west), Gravesend (2 miles north), Denton (2 miles north) and Northfleet Green (2 miles north-west). Within a short drive, we also cover Maidstone (11 miles south-east), Dartford (8 miles west), Sevenoaks (12 miles south-west), Tonbridge (15 miles south), Northfleet (3 miles north-west) and Swanley (9 miles west).
Around Henhurst
Around Henhurst, our work takes us to homes and buildings near Jeskyns, The George Inn and Thamesview School, among other places. The closest station to Henhurst is Sole Street station, roughly 1.3 miles south of the centre. A little further out are Gravesham Museum (2.8 miles north) and Gravesham Community Hospital (3 miles north). The countryside around Henhurst includes Sawyers Lake and Gad's Hill.
How the job changes by surface
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. Water that gets behind can damage the unit, so a neat, continuous bead matters.
Baths
Most bath leaks begin along the long edge, especially under a shower. It gets one smooth bead of anti-fungal silicone.
The process
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the work takes half a day or less for one room, longer when the kitchen is included in most cases. For a village or hamlet like Henhurst, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Preparing for the visit
- Tell us if parking is tricky
- Let us know about stairs, lifts or work at height
- For business premises, tell us about site rules or sign-in
Getting a quote
There’s no standard price list, because every job is different. Instead, we send you a clear quote for your job. To get started, call 0345 464 0079 or drop us an email.
Advice
What else we do in Henhurst
Common problems we fix in Henhurst
A bath shifts a little every time it’s filled and emptied. Acrylic in particular gives slightly under the weight of water and a person, and a tray that isn’t fully bedded can rock. That movement works at the bead until it splits or peels away.
The most common problems we see are:
- Gaps where the bath or tray has moved
- Lumpy, uneven sealant from a DIY attempt
- A bead that has pulled away from the tiles
- Mouldy sealant that has gone black
Letting a property close to Sole Street station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Questions to ask before you book
- What happens if the job turns out different
- What guarantee comes with the work
- What the cure time is
- Whether they’re fully insured
What affects the quote in Henhurst
Some jobs are bigger than they look, and some smaller. The main factors:
- How many areas need sealing
- When we can work, for business premises
- The type of sealant required
- How much old sealant there is and how hard it is to remove
What it costs depends on how much there is to do, how much old material has to come out and access to the work. You will have a clear quote before any work starts, so you know where you stand.
What we need to know
To make quoting easier, please include:
- Any previous sealing or DIY work
- What’s wrong with the joints now
- Pictures of the joints, sent by email
- How we’d reach the joints
Asking for a quote is easy: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand, and we’ll take it from there.