Hampshire · England
Hannington Bathroom Resealing
Bathroom resealing in Hannington from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Failed sealant on the screen profile
- Shrunken sealant along the back of a worktop
- A reseal done over the top of the old bead
Leave it or put it right?
Dealing with sealant early is a short job: it takes a morning or an afternoon for most single baths and showers. Left until water gets through, the job can grow to lifting panels, drying out and decorating. In a small place like Hannington, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll go through it with you.
What you get with us
- Approved under the ARBOMaster scheme
- Neat joints and a tidy finish
- Full insurance on every job
- Old sealant always removed completely
Take a look at our cost guide and customer reviews.
About our bathroom resealing in Hannington
A shower joint gets soaked every day. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. They’re resealed with anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on sinks & splashbacks, baths and basins & vanity units, and people most often call us about leaks into the floor or ceiling below and water escaping at the shower enclosure.
Around Hannington, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Hannington (RG26)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
How it works
Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes half a day or less for one room, longer when the kitchen is included. Somewhere as small as Hannington, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First the area is protected and every bit of old sealant removed.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
Before we arrive
- Let us know about earlier repairs to the joints
- Where the joints are inside, avoid wetting them before we arrive
- Clear the area around the work
Getting a quote
We quote each job on its own, so start by telling us what you need. Simply phone 0345 464 0079 or drop us an email and describe the job.
Read more
What bathroom resealing looks like in Hannington
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you live in an older home near Church of All Saints, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Hannington is about 5 miles south-west of Tadley, in Hampshire. If you need bathroom resealing in Hannington, please call 0345 464 0079 or drop us an email for a quick quote. We’re based in Crawley and cover Hampshire, Hannington included. Hannington is one of 683 towns and villages in Hampshire we cover for bathroom resealing. There’s also a page for Reading, about 15 miles away.
Every address in RG26 is covered for bathroom resealing. Whether your property is on Meadham Lane and Ibworth Lane or a nearby road, our applicators can take on the job. Neighbouring places we cover for bathroom resealing include Kingsclere (2 miles north-west), Ibworth (2 miles south-east), Wolverton (2 miles north-east), Townsend (2 miles north-east) and Wolverton Common (3 miles north-east). We also work in nearby towns such as Basingstoke (6 miles south-east), Andover (13 miles south-west), Alton (15 miles south-east), Tadley (5 miles north-east), Hook (12 miles east) and Popley (6 miles east).
Near you in Hannington
We work in homes and buildings around The Vine pub. For rail, the closest station is Overton station, about 3.4 miles south-west. Nearby you will also find Park Prewett Hospital (4.8 miles east). Green spaces nearby include Ladle Hill.
Landlord and commercial work in Hannington
We work for landlords and letting agents as well as homeowners. Sealant work between tenants keeps a property looking cared for.
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can be quoted together.
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
How we quote for bathroom resealing
Your quote is based on your job. We look at:
- Whether old sealant or filler has to be cut out
- Any mould that needs treating
- Whether the work is at height
- Any working-time requirements on site
What it costs depends on the amount of work, how much old material has to come out and how easy the joints are to reach. We give a clear quote before work begins, so you know where you stand.
What to tell us for a quote
To make quoting easier, please include:
- Any previous sealing or DIY work
- Photos by email, if that’s easy
- Roughly how big the job is
- The type of property
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Hannington questions
Do you cover smaller places like Hannington?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you help a landlord with a rental near Overton station?
Yes, we work for landlords and agents. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.
Do I need to be at home?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
Is white the only colour available?
There’s a choice: white, clear and colours to suit tiles and worktops. We can help you pick when we quote.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
What information do you need?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Do you work for hotels and businesses?
Yes, regularly. Larger jobs can be planned room by room or area by area.
Places near Hannington
What else we do in Hannington
When to call us in Hannington
Silicone doesn’t last for ever. Daily water, heat and cleaning products slowly wear it down, so its life depends on how the room is used, cleaned and aired.
People usually contact us after spotting something like this:
- Gaps between the worktop and the wall
- A messy, uneven bead from a previous reseal
- Failed sealant on the screen profile
- Damp behind the bath or under the tray
If you let a flat or house near Overton station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Before you book anyone
- What product goes in the joint
- How the surfaces are prepared before sealing
- What happens if they find a problem under the old sealant
- Whether all the old sealant comes out first
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Use gentle cleaners on the silicone
- Don’t let bottles sit on the bead
- Keep the fan on for a while after bathing
- Let new sealant cure fully before it gets wet
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Catching it early keeps it a simple reseal.