Essex · England
Bathroom & kitchen resealing in Great Burstead, Essex
Bathroom resealing in Great Burstead from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- A joint torn by a bath that flexes
- Black mould in the silicone that won’t clean off
- Gaps between the worktop and the wall
Bathroom resealing in Great Burstead
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. It also seals the gaps that let water behind the bath. We work on shower trays & enclosures, wet rooms and sinks & splashbacks, and people most often call us about failed sealant on the screen profile and water getting behind the bath panel.
Around Great Burstead, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Great Burstead (CM11, SS15)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Common questions in Great Burstead
Do you work for landlords with property near Billericay station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Is Great Burstead in your area for bathroom resealing?
Yes. Our work covers London and the South East, and Great Burstead is part of that. Just call 0345 464 0079 or email us with a few details of the job.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator and we’re fully insured too.
Can you quote for more than one area?
Of course. Doing several areas at once is usually more efficient.
Is there any odour?
Some sealants have a smell while they cure, which fades as it sets. Opening a window helps.
How long before the new sealant can get wet?
After around 24 hours in most cases. We’ll tell you the cure time for the product we used.
How much does bathroom resealing cost in Great Burstead?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You will get a clear quote before any work starts.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
How we quote for bathroom resealing
You’ll get a clear quote before we start. It takes into account:
- The old material and how stubborn it is
- When we can work, for business premises
- Mould in or behind the old joints
- Which sealant suits the joint
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and give you a clear price before any work starts.
What we need to know
What to tell us when you ask for a quote:
- The problem you’ve noticed
- Roughly how big the job is
- Where the job is, and your postcode
- If it’s domestic, commercial or a hotel
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, phone 0345 464 0079 or drop us an email.
Bathroom resealing around Great Burstead
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Billericay station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. In the older streets around Church of St Mary Magdalene, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Great Burstead is about 2 miles south-east of Billericay, in Essex. If you need bathroom resealing in Great Burstead, please call 0345 464 0079 or drop us an email for a quick quote. We cover Essex from our Crawley base, Great Burstead included. Great Burstead is one of 644 places in Essex we cover. There’s also a page for Chelmsford, about 9 miles away.
Every address in CM11 and SS15 is covered for bathroom resealing, from the main roads to the quietest streets. If you need bathroom resealing at a property on Mill Road, Southend Road and Tyrrells Road or anywhere close by, we can help. We also cover Crays Hill (1 mile east), Little Burstead (1 mile west), Billericay (2 miles north-west), Ramsden Bellhouse (2 miles north-east) and Ramsden Heath (3 miles north-east). Further out, we also cover Chelmsford (9 miles north), Brentwood (6 miles west), Maldon (13 miles north-east), Canvey Island (8 miles south-east), Rayleigh (7 miles east) and Wickford (4 miles east).
Around Great Burstead
In Great Burstead, that means homes and buildings near Kings Head pub and The Billericay School, among other places. For rail, the closest station is Billericay station, roughly 2.1 miles north-west. A little further out are Eastgate Shopping Centre (2.5 miles south) and Barleylands Farm Museum (under half a mile south). Not far away are Norsey Wood.
Places near Great Burstead
Also in Great Burstead
Different surfaces, different methods
Basins & vanity units
Basin joints are short and close to eye level: so we keep the line tidy and even, in white, clear or a colour to suit.
Wet rooms
If a wet room leaks, the cause may be the tanking or the drain rather than the joints. We check the joints and say so if the fault looks to be elsewhere.
The process
There’s no need to move everything out, only the area right around the joints. Everything nearby is protected, and the work takes around two hours for one bath or shower, longer for a whole bathroom for a typical job. For a village or hamlet like Great Burstead, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- On commercial sites, let us know about site rules
- Let us know about earlier repairs to the joints
Getting a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or send us an email.
Read more
Why deal with it now?
Dealing with sealant early is a short job: it takes around two hours for one bath or shower, longer for a whole bathroom. Left until water gets through, the job can grow to lifting panels, drying out and decorating. Around Great Burstead, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
What you get with us
- Old sealant always removed completely
- Colour agreed with you before any work starts
- Neat joints and a tidy finish
- Homes, businesses and hotels
Take a look at our cost guide or what customers say.
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Never pick at the silicone with a blade
- Keep an eye on the corners, where splits start
- Keep bottles off the sealant line
- Run the extractor fan during and after every shower
Treat the new bead gently when you clean: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.
What we can’t put right
Before you book, it’s worth knowing the limits too:
- Cracks in the tray itself rather than the joint
- Damage behind the tiles that needs a tiler
- Water getting in through the grout rather than the sealant
Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly before booking.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Sinks & splashbacks
- Baths
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
Common problems we fix in Great Burstead
The wrong product fails fast. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they crack, discolour or grow mould quickly. A bathroom joint needs anti-fungal sanitary silicone.
Signs it’s time to call us include:
- New sealant laid over old sealant that is now lifting
- Water getting behind the bath panel
- A joint torn by a bath that flexes
- A messy, uneven bead from a previous reseal
Managing a site like St Peter's Catholic Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Comparing quotes
- Which colour the sealant will be
- Are they insured?
- What the cure time is
- Who turns up on the day