Hampshire · England
Fisher's Pond Bathroom Resealing
Bathroom resealing in Fisher's Pond from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Black mould in the silicone that won’t clean off
- A joint torn by a bath that flexes
- Smears of silicone across the tiles
Bathroom resealing for homes and businesses in Fisher's Pond
Showers work their sealant harder than baths. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. Each gets a bead of anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. If you have a joint torn by a bath that flexes and mouldy sealant that has gone black, we can help.
For a small place like Fisher's Pond, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
You’re covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or drop us an email.
- Location
- Fisher's Pond (SO50)
- Region
- Hampshire
- Cover
- A year, on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
How the visit works
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. In total, it normally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. In a small place like Fisher's Pond, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
How to prepare
- Try not to wet indoor joints just before the visit
- Tell us about any previous sealing or DIY attempts
- Let us know about parking restrictions
How to get a quote
There’s no standard price list, because every job is different. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or send us an email.
Read more
When to call us in Fisher's Pond
Black mould is behind a lot of resealing. Steamy rooms that don’t dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
Most people get in touch when they notice something like this:
- Smears of silicone across the tiles
- Black mould in the silicone that will not clean off
- Damp behind the bath or under the tray
- Water getting behind the kitchen upstand
For an older house near a landmark such as Church of the Holy Trinity, walls and floors in older homes can move, and sealant and grout show it first.
Comparing quotes
- Whether the sealant suits the joint
- How long to leave it before use
- How the surfaces are prepared before sealing
- The length of the guarantee
Bathroom resealing around Fisher's Pond
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For site and facilities teams at buildings such as Colden Common Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Letting a property close to Eastleigh station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Fisher's Pond is about 2 miles north-east of Eastleigh, in Hampshire. Whether you’re in the middle of Fisher's Pond or further out, bathroom resealing is available for homes and businesses alike, from flats and houses to offices and hotels. Fisher's Pond is one of 683 places in Hampshire where we work. Our Southampton page covers work nearby (6 miles or so).
All of SO50 is within our area for bathroom resealing. Nearby, we also carry out bathroom resealing in Nob's Crook (1 mile north-west), Crowdhill (1 mile south), Colden Common (1 mile north-west), Brambridge (1 mile north-west) and Lord's Wood (1 mile west). We also work in nearby towns such as Winchester (5 miles north), Gosport (14 miles south-east), Fareham (10 miles south-east), Horndean (14 miles south-east), Totton (10 miles south-west) and Chandler's Ford (4 miles west).
Near you in Fisher's Pond
Typical jobs here are in homes near Wyvern Technology College and The Fox & Hounds pub, among other places. For rail, the closest station is Eastleigh station, about 2.3 miles south-west. Other landmarks nearby include Moorgreen Hospital (4.1 miles south) and Eastleigh Museum (2.4 miles south-west). Green spaces nearby include Twyford Down and Shawford Down.
What affects the cost of bathroom resealing
The quote reflects the job in front of us. We look at:
- How much there is to do
- The type of sealant required
- Working hours on commercial sites
- Access and height
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
What to tell us for a quote
You don’t need to know the technical terms. Just tell us:
- How we’d reach the joints
- Where the job is, and your postcode
- Photos by email, if that’s easy
- If it’s domestic, commercial or a hotel
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. Whenever you are ready, call 0345 464 0079 or drop us an email.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Aftercare tips
After the cure time, these simple habits help:
- Check the joints every few months for splits or lifting
- Dry the bead with a towel now and then
- Stick to a soft cloth and a mild cleaner
- Give the silicone its full cure time
Don’t stand bottles along the bead, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. Any of these means the joint needs attention.
What the job involves on each surface
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, and a food-safe product where it’s needed. The bead is finished smooth so it wipes clean.
Wet rooms
Wet room floors move slightly as they’re used, so the corners need a flexible seal, not grout. Cracked grout in a corner can be cut out and replaced with silicone.
Landlords, agents and businesses in Fisher's Pond
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
FAQs for Fisher's Pond
Is Fisher's Pond within the area you cover?
Yes. Fisher's Pond is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Eastleigh station?
Yes. We work for letting agents and landlords as well as householders. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Do you reseal kitchen worktops and sinks too?
Yes. Worktops, sinks and splashbacks are all part of the job, in a kitchen-suitable sealant, matched to the worktop where it’s on show.
Can you work on commercial sites?
Yes. Commercial and hotel work is a large part of what we do. We can talk about working times when we quote.
Is it OK to put new sealant on top of the old bead?
No, and it’s one of the main reasons reseals fail. We cut out all of the old sealant, clean the joint and start again.
Can mouldy silicone be sorted out?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.