Southampton · England
Bathroom & kitchen resealing in Eling, Southampton
Bath, shower, basin, wet room, worktop and sink resealing for Eling, backed by a one-year guarantee. Ask us for a quote.
- Splits where the tray meets the wall
- Gaps between the worktop and the wall
- Black spots spreading through the bead
Honest limits
In fairness, some problems need a different trade:
- Tiles that have come away from the wall
- Water getting in through the grout rather than the sealant
- A cracked shower tray or bath (that needs repair or replacement)
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think before you book.
Where we work in Eling
- Wet rooms
- Sinks & splashbacks
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Kitchen worktops & upstands
About our bathroom resealing in Eling
The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. When it splits, shrinks or turns black, water gets behind it. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. Common call-outs are for mouldy sealant that has gone black and failed sealant on the screen profile, across shower trays & enclosures, baths and kitchen worktops & upstands.
Smaller places like Eling still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Eling (SO40, SO15)
- Wider area
- Southampton
- Cover
- One year on every job
- Quote
- A clear price before we start
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Questions from Eling
Do you work for landlords with property near Totton station?
Yes, we work for landlords and agents. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.
Do you take on hotel work around Eling?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Do you come to Eling?
Yes. We’re based in Crawley and work across South East England, London and Scotland, and that includes Eling.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and we clear up when we’re done.
How long does it take to reseal a bath or shower?
Allow half a day or less for one room, longer when the kitchen is included. You will know how long to expect before work begins.
Where are you based?
We’re a Crawley-based firm. We work across South East England, London and Scotland.
How do I get a quote for bathroom resealing in Eling?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before work begins.
Is the work guaranteed?
Yes. Our 12-month guarantee covers every job, and we’re ARBOMaster approved applicators.
For landlords and businesses
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
What bathroom resealing looks like in Eling
Eling is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. There are hotels and other places to stay in and around Eling. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Schools such as Eling Infant School and Nursery are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to Totton station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Eling is about 1 mile south-east of Totton, in Southampton. From the centre of Eling to the outskirts, bathroom resealing is available for homes and businesses alike. Our Southampton coverage runs to 40 places, Eling among them.
Here we cover the SO40 and SO15 postcode area for bathroom resealing. You will find streets such as Bury Lane, Rose Road and Mill Road, all of which we cover. Eling sits on or near the A35. Nearby, we also carry out bathroom resealing in Redbridge (1 mile north-east), Millbrook (2 miles east), Hillyfields (2 miles north-east), Maybush (2 miles north-east) and Regents Park (2 miles east). Within a short drive, we also cover Southampton (4 miles east), Townhill Park (6 miles east), Midanbury (5 miles east), Thornhill (6 miles east), Chartwell Green (6 miles east) and Harefield (6 miles east).
Around Eling
Around Eling, our work takes us to homes and buildings near The Anchor pub and Hounsdown School and the streets around them. There’s a railway station in Eling itself: Totton station. Other landmarks nearby include Eling Experience (0.6 miles north) and Westquay (3.5 miles east). Open spaces near Eling include Testwood Lakes.
What else we do in Eling
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Leave it or put it right?
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead will not last. In a smaller place like Eling, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
Why Eling clients choose us
- White, clear, grey or coloured to suit, where the product allows
- We never seal over old sealant
- Colour picked to suit the job
- Rated 4.9 stars on Google
Read our cost guide or our reviews.
How the visit works
Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a couple of hours for a single bath or shower. In a smaller place like Eling, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We protect the area and cut out all of the old sealant.
- We clean and degrease the joint and treat any mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Clear items away from the joints we are working on
- Tell us about any previous sealing or DIY attempts
How to get a quote
For bathroom resealing in Eling, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you will get a clear quote before we start.
Advice
When to call us in Eling
Sealant laid on a damp, dusty or greasy joint never bonds properly. Soap residue, oils and leftover silicone film all get in the way, and a joint that looked fine soon begins to come away.
The problems people usually mention when they call are:
- Lumpy, uneven sealant from a DIY attempt
- Black spots spreading through the bead
- Leaks into the floor or ceiling below
- Cracked, shrunken or lifting silicone
In the older streets around Church of St Mary, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
What to look for in a quote
- Who does the work, and how experienced they are
- Is the old sealant removed completely?
- Is VAT in the price?
- What happens if they find a problem under the old sealant
Looking after it afterwards
So the new joints stay in good condition:
- Let new sealant cure fully before it gets wet
- Use gentle cleaners on the silicone
- Squeegee the walls and tray after use
- Look for lifting corners and small gaps now and then
Don’t stand bottles along the bead, because they trap water against the silicone. A quick squeegee after showering helps the joint dry.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning usually won’t remove it. Catching it early keeps it a simple reseal.