Hampshire · England
Bathroom & kitchen resealing in Corhampton, Hampshire
Professional bathroom resealing in and around Corhampton, with every bit of old sealant taken out first.
- Leaks into the floor or ceiling below
- Water escaping at the shower enclosure
- Sealant that has split, shrunk or peeled away
About our bathroom resealing in Corhampton
Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. If you have a bead that has pulled away from the tiles and black mould in the silicone that won’t clean off, we can help, on kitchen worktops & upstands, sinks & splashbacks and basins & vanity units alike.
Around Corhampton, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
You’re covered for a year from the day we finish. If anything isn’t right with it, ring 0345 464 0079 or email us.
- Place
- Corhampton (SO32)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Corhampton homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Schools such as Meonstoke Church of England Infant School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Corhampton is about 7 miles north-west of Horndean, in Hampshire. Every kind of property in Corhampton is covered for bathroom resealing, old or new, large or small. The work is guaranteed for a year. We cover 683 towns and villages across Hampshire, large and small. For nearby work, see our Southampton page (12 miles or so).
Work in SO32 is quoted and booked the same way as anywhere else. We cover properties on De Port Heights, Warnford Road and Millside. Neighbouring places we cover for bathroom resealing include Exton (1 mile north), Meonstoke (1 mile south), Brockbridge (1 mile south), Droxford (1 mile south) and Soberton (2 miles south). Within a short drive, we also cover Winchester (10 miles north-west), Gosport (12 miles south), Havant (10 miles south-east), Eastleigh (9 miles west), Fareham (9 miles south) and Horndean (7 miles south-east).
Landmarks near Corhampton
Typical jobs here are in homes near The Shoe Inn. For a walk, there’s Beacon Hill and St Clair's Meadow.
Common problems we fix in Corhampton
Silicone does not last for ever. Every shower, every splash and every wipe with a cleaner slowly wear it down, and how long it lasts comes down to use, cleaning and ventilation.
Signs it’s time to call us include:
- Leaking joints on a shower screen
- Smears of silicone across the tiles
- Damp behind the bath or under the tray
- A joint torn by a bath that flexes
For an older house near a landmark such as Corhampton Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Comparing quotes
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
- How long the guarantee is
- What insurance they hold
How we quote for bathroom resealing
You will get a clear quote before any work starts. It’s based on:
- How much old sealant there is and how hard it is to remove
- Working hours on commercial sites
- Whether the work is at height
- How many areas need sealing
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we will explain what it covers.
What to tell us for a quote
To make quoting easier, let us know:
- The type of property
- If someone has resealed it before
- How many joints, rooms or windows are involved
- The address or postcode of the job
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved before giving you a price.
Should I try it myself first?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
What we do, step by step
On the day, we look over the joints with you first. We protect the surfaces around the joints before we start. Most jobs take a couple of hours for a single bath or shower. For a village or hamlet like Corhampton, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, normally around 24 hours.
Before we arrive
- Mention if the joints have been sealed before
- Mention any tricky access
- Keep pets and children clear of the area while we work
Get a quote
For a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Read more
How the job changes by surface
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, and a food-safe product where it’s needed. The bead is finished smooth so it wipes clean.
Kitchen worktops & upstands
Upstands and back edges are cut out, cleaned of grease and resealed, since cooking leaves a film that stops silicone sticking. The extra cleaning is what makes the bead last.
Nearby places to Corhampton
More services for Corhampton
Common questions in Corhampton
Is there a guarantee on bathroom resealing in Corhampton?
Every job comes with our 12-month guarantee, wherever it is. We’re fully insured, and an ARBOMaster approved applicator.
Is Corhampton within the area you cover?
Yes. Corhampton is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords and businesses?
Yes. We work in homes, commercial premises and hotels, and we’re fully insured.
Where are you based?
We are based in Crawley, and we work across South East England, London and Scotland.
How much does bathroom resealing cost in Corhampton?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
Can I add another job to the visit?
Yes, we can. More than one area can be quoted together.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Can I do it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Why act early in Corhampton
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead won’t last. Around Corhampton, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or email us and we’ll give you an honest view and a quote.
What you get with us
- We never seal over old sealant
- Homes, businesses and hotels
- A choice of colours where the product allows
- Arbo and Everbuild products
Take a look at how sealant jobs are priced and customer reviews.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Squeegee the walls and tray after use
- Use gentle cleaners on the silicone
- Keep the fan on for a while after bathing
- Keep bottles off the sealant line
Do not stand bottles along the bead, because they trap water against the silicone. Squeegeeing the walls and tray after use helps the joint dry.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, and the board underneath can swell. A reseal in time can save the worktop.