Hampshire · England
Meonstoke Bathroom Resealing
Bathroom resealing across Meonstoke and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Mouldy sealant that has gone black
- New sealant laid over old sealant that is now lifting
- Lumpy, uneven sealant from a DIY attempt
How we handle bathroom resealing in Meonstoke
A bead that has gone black, split or come away is worth sorting before it lets water through. A photo of the joints helps when you ring 0345 464 0079 or send us an email, and we will send you a clear quote before any work starts. We work on wet rooms, sinks & splashbacks and basins & vanity units, and common reasons people get in touch are two layers of silicone, both failing and a bead that has pulled away from the tiles.
Around Meonstoke, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
You get a one-year guarantee, the same in Meonstoke as everywhere else we work.
- Place
- Meonstoke (SO32)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Why act early in Meonstoke
Fresh sealant smartens a bathroom or kitchen with very little disruption, which matters if you’re letting a property or selling it. A smeared, uneven DIY bead does the opposite. Around Meonstoke, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- 180+ five-star Google reviews
- Colour agreed with you before work begins
- A choice of colours where the product allows
- ARBOMaster approved applicator
What bathroom resealing looks like in Meonstoke
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Meonstoke Church of England Infant School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Meonstoke is about 7 miles north-west of Horndean, in Hampshire. Jobs in Meonstoke get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Meonstoke is one of 683 towns and villages in Hampshire we cover for bathroom resealing. For nearby work, see our Southampton page (12 miles or so).
Here we cover the SO32 postcode area for bathroom resealing. Local streets include High Street, Oxendown and Fry's Lane. Nearby, we also carry out bathroom resealing in Corhampton (1 mile north), Exton (1 mile north), Brockbridge (1 mile south-west), Droxford (1 mile south-west) and Soberton (2 miles south). Larger places within reach include Winchester (10 miles north-west), Gosport (12 miles south), Havant (10 miles south-east), Eastleigh (10 miles west), Fareham (9 miles south) and Horndean (7 miles south-east).
What’s near Meonstoke
We work in homes and buildings around The Bucks Head pub and the streets around them. The countryside around Meonstoke includes Beacon Hill and St Clair's Meadow.
Meonstoke questions
Will you come out to Meonstoke?
Yes. Meonstoke is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is there a guarantee on bathroom resealing in Meonstoke?
Every job comes with our one-year guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Where are you based?
We work from Crawley. We cover Meonstoke and the rest of Hampshire.
Is it OK to put new sealant on top of the old bead?
No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.
Can landlords and businesses book you?
Yes. Domestic, commercial and hotel work are all part of what we do.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Do you have insurance?
Yes. We are fully insured for domestic and commercial work.
When to call us in Meonstoke
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.
If you can see any of these, it’s time to have the joints looked at:
- Failed sealant on the screen profile
- Water getting behind the kitchen upstand
- Black mould in the silicone that won’t clean off
- A joint torn by a bath that flexes
In the older streets around Church of St Andrew, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Questions to ask before booking
- Which colour the sealant will be
- When the joint can take water or movement
- What product goes in the joint
- Whether all the old sealant comes out first
Can I do it myself?
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
When something else is needed
A few problems are outside what sealant work can do:
- Cracked or missing grout between tiles (that is regrouting)
- A cracked shower tray or bath (that needs repair or replacement)
- Water coming from the plumbing rather than the joint
If in doubt, call 0345 464 0079 or email us and we’ll say what we think.
What we seal
- Shower trays & enclosures
- Kitchen worktops & upstands
- Sinks & splashbacks
- Baths
- Basins & vanity units
- Wet rooms
Towns and villages near Meonstoke
Also in Meonstoke
How the job changes by surface
Baths
A bath shifts slightly every time it’s filled, so it’s filled with water before the bead goes on. That way the joint is laid with the bath at its heaviest.
Shower trays & enclosures
If a tray moves underfoot, new silicone won’t last. Movement is checked before anything is resealed, and tell you if it needs re-bedding first.
What affects the cost of bathroom resealing
Every job gets its own quote. This is what makes a difference:
- Access and height
- When we can work, for business premises
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
What to tell us for a quote
When you contact us, it’s useful to know:
- Any previous sealing or DIY work
- The address or postcode of the job
- How many joints, rooms or windows are involved
- The type of property
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
The process
There’s no need to move everything out, just the space around the work. We protect the rest, and the job takes around two hours for one bath or shower, longer for a whole bathroom for a typical job. Somewhere like Meonstoke needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Move anything stored near the joints
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you are ready, ring 0345 464 0079 or send us an email.