West Sussex · England
Colwood Bathroom Resealing
Baths, showers and worktops in Colwood need attention? We remove the old material, prepare the joints and seal them properly.
- Water escaping at the shower enclosure
- Shrunken sealant along the back of a worktop
- Two layers of silicone, both failing
About our bathroom resealing in Colwood
Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on kitchen worktops & upstands, baths and basins & vanity units, and common reasons people get in touch are leaking joints on a shower screen and shrunken sealant along the back of a worktop.
Around Colwood, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Colwood (RH17)
- Wider area
- West Sussex
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
How the job changes by surface
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. Where the sealant around the visible edge has failed, we renew it.
Baths
Acrylic baths flex the most, and even steel and cast iron baths settle slightly when full. Loading the bath with water before sealing allows for it.
The process
The work is kept neat and contained to the joints we’re treating, so you can get on with your day. Expect the work to take two to three hours for a typical bath, depending on how much old sealant there is. In a small place like Colwood, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by protecting the area and stripping out the old bead.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, normally after around 24 hours.
How to prepare
- Clear items away from the joints we’re working on
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
Getting a quote
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will talk you through the work before giving you a price.
Related advice
Should I try it myself first?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Colwood: your questions answered
Is bathroom resealing in Colwood guaranteed?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Will you come out to Colwood?
Yes. Colwood is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you do commercial work?
Yes. We’ve worked for hotels, offices and other businesses, and we are fully insured.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Do you reseal kitchen worktops and sinks too?
Yes, often alongside a bathroom. Next to the sink we use a food-safe product where it’s needed.
Does someone need to be in?
It depends on the job. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Is there any odour?
Some sealants have a smell while they cure, which fades as it sets. Opening a window helps.
How long does it take to reseal a bath or shower?
Allow a morning or an afternoon for most single baths and showers. We will confirm how long your job needs when we quote.
What sealant work can’t fix
Some problems need a builder, plumber or other trade rather than us:
- Tiles that have come away from the wall
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A cracked shower tray or bath (that needs repair or replacement)
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think before you book.
What we seal
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & upstands
- Sinks & splashbacks
Do you need bathroom resealing in Colwood?
Baths and trays move. Acrylic in particular gives slightly under the weight of water and a person, while a poorly supported tray can shift underfoot. Over time the joint tears or pulls away from the tile.
Look out for any of the following:
- Splits where the tray meets the wall
- A messy, uneven bead from a previous reseal
- Leaks into the floor or ceiling below
- Sealant that has split, shrunk or peeled away
Whether the job is in Colwood itself or nearby, the right material for each joint matters as much as a neat finish.
Questions to ask before you book
- How the joint is cleaned and prepared
- Is VAT in the price?
- What the cure time is
- How hidden problems are handled
Places near Colwood
What else we do in Colwood
What bathroom resealing looks like in Colwood
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In and around Colwood, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Colwood is about 5 miles north-west of Burgess Hill, in West Sussex. Wherever you are in the RH17 postcode area, we cover bathroom resealing for homes and businesses. Across West Sussex, we cover 371 places, and Colwood is one of them. There’s also a page for Crawley, about 8 miles away.
All of RH17 is within our area for bathroom resealing, from the main roads to the quietest streets. Local streets include Earwig Lane and Cross Colwood Lane. Other places close to Colwood include Crabtree (1 mile north-west), Lower Beeding (2 miles north-west), Slaugham (3 miles north), Plummers Plain (3 miles north) and Monk's Gate (3 miles north-west). Larger places within reach include Crawley (8 miles north), Horsham (6 miles north-west), Worthing (15 miles south-west), Haywards Heath (6 miles east), Burgess Hill (5 miles south-east) and East Grinstead (13 miles north-east).
Near you in Colwood
We work in homes and buildings around Leonardslee and the streets around them. A little further out are The Dene Hospital (3.8 miles south-east) and Cuckfield Museum (3.7 miles east). Open spaces near Colwood include Blunts Wood and Paiges Meadow.
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Wipe the sealant dry after showering
- Keep scourers and sharp tools away from the bead
- Check the joints every few months for splits or lifting
- Stick to a soft cloth and a mild cleaner
Give the silicone time to cure before it gets wet, following the cure time we give you. Once it’s cured, wiping it down after use keeps it looking new.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.
Leave it or put it right?
You do not need a new bathroom because the sealant looks bad. A new bead often brings the whole room back, as long as the fittings themselves are sound. If something else is wrong, we will tell you. Older cottages and farmhouses around Colwood can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email for an honest opinion and a quote.
What you get with us
- Trusted Arbo and Everbuild sealants
- Tidy, careful work
- White, clear, grey or another colour, product permitting
- ARBOMaster approved applicator
See what affects the cost or our reviews.