West Sussex · England
Bathroom Resealing in Plummers Plain
Bath, shower, basin, wet room, worktop and sink resealing for Plummers Plain, backed by a one-year guarantee. Call for a quick quote.
- Sealant that has split, shrunk or peeled away
- Black spots spreading through the bead
- A reseal done over the top of the old bead
How we handle bathroom resealing in Plummers Plain
Before a bath is sealed, it’s filled with water. A full bath sits slightly lower than an empty one, so the bead is not stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. We work on sinks & splashbacks, shower trays & enclosures and wet rooms, and people most often call us about water getting behind the kitchen upstand and water getting behind the bath panel.
Around Plummers Plain, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
There’s a 12-month guarantee on every job.
- Place
- Plummers Plain (RH13)
- Region
- West Sussex
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Bathrooms and kitchens in Plummers Plain
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Newells Preparatory School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. In the older streets around St Mary's Church, older homes can move a little, which is hard on rigid grout and tired sealant. If you let a flat or house near Faygate station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Plummers Plain is about 4 miles east of Horsham, in West Sussex. We carry out bathroom resealing for homes and businesses in Plummers Plain and nearby, as part of our work across West Sussex. We cover 371 towns and villages across West Sussex, large and small.
Every address in RH13 is within our area for bathroom resealing. Bathroom resealing is available to properties on Handford Way, Handcross Road and Hammerpond Road and the roads around them. If you’re just outside Plummers Plain, we cover Slaugham (1 mile east), Lower Beeding (1 mile south-west), Handcross (2 miles north-east), Mannings Heath (2 miles west) and Crabtree (2 miles south-west). Within a short drive, we also cover Crawley (5 miles north-east), Horsham (4 miles west), Haywards Heath (7 miles south-east), Burgess Hill (8 miles south-east), East Grinstead (11 miles north-east) and Shoreham-by-Sea (14 miles south).
Landmarks near Plummers Plain
We work in homes and buildings around The Wheatsheaf pub and the streets around them. The nearest railway station is Faygate station, roughly 3.8 miles north of the centre. Other landmarks nearby include Horsham Hospital (4.4 miles north-west). Green spaces nearby include Tilgate Lake and Warnham LNR.
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Also near Plummers Plain
What else we do in Plummers Plain
What we do, step by step
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes two to three hours for a typical bath, depending on how much old sealant there is for a typical job. Somewhere as small as Plummers Plain, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about parking restrictions
- Let us know about stairs, lifts or work at height
How to get a quote
We quote each job on its own, so start by telling us what you need. Just phone 0345 464 0079 or send us an email with the details, and pictures are welcome.
Related advice
Keeping the joints in good condition
After the cure time, these simple habits help:
- Move toiletries away from the joint
- Wipe the sealant dry after showering
- Keep an eye on the corners, where splits start
- Dry worktop joints after washing up
Don’t stand bottles along the bead, because they trap water against the silicone. Squeegeeing the walls and tray after use helps the joint dry.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
Questions from Plummers Plain
Can you help a landlord with a rental near Faygate station?
Yes. We work for letting agents and landlords as well as householders, and several properties can go on one quote. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear quote.
Do you cover Plummers Plain for bathroom resealing?
Yes. Our work covers London and the South East, and Plummers Plain is part of that. You can call 0345 464 0079 or send us an email and tell us what needs doing, and we’ll send you a clear quote.
Can you work on commercial sites?
Yes. We work in offices, washrooms, hotels and other commercial premises. We can talk about working times when we quote.
Do you guarantee your resealing?
Yes. We give a 12-month guarantee on every job, and we are fully insured.
Do you reseal kitchen worktops and sinks too?
Yes. We reseal worktop upstands, sinks and splashbacks, in a kitchen-suitable sealant, matched to the worktop where it’s on show.
How long will the resealing take?
One bath or shower is around two hours’ work, old sealant removal included. A whole bathroom plus the kitchen may take most of the day.
Should I try DIY first?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will explain our choice.
What the job involves on each surface
Sinks & splashbacks
The edge of an inset sink is a common place for water to get under the worktop. We reseal the visible edge of the sink where it has failed.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Old sealant there often goes black at the corners, and we treat it exactly as we would a bath.
What sealant work can’t fix
It helps to know what we can’t do:
- Water getting in through the grout rather than the sealant
- A leaking waste, trap or valve
- Damage behind the tiles that needs a tiler
If you’re not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer before booking.
Surfaces we seal
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & upstands
- Baths
- Basins & vanity units
- Sinks & splashbacks
Landlord and commercial work in Plummers Plain
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
How we quote for bathroom resealing
The price is agreed before any work begins. It’s based on:
- Any mould that needs treating
- How many areas need sealing
- The amount of work
- Whether the work is at height
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before we start.
Helping us quote
To help us quote quickly, please include:
- Any previous sealing or DIY work
- The address or postcode of the job
- What’s wrong with the joints now
- The type of property
Need a quote? Please phone 0345 464 0079 or email us with a few details. We’ll explain what we’d do and give you a clear quote before we start.