Surrey · England
Bathroom & kitchen resealing in Claygate, Surrey
Professional bathroom resealing in and around Claygate, with old sealant always removed completely and a 12-month guarantee.
- Cracked, shrunken or lifting silicone
- Splits where the tray meets the wall
- Black spots spreading through the bead
Honest limits
It helps to know what we cannot do:
- Movement from a bath with loose feet or no proper support
- A cracked shower tray or bath (that needs repair or replacement)
- Loose or hollow tiles, or failed tanking behind them
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think before you book.
Joints and surfaces we work on
- Basins & vanity units
- Sinks & splashbacks
- Kitchen worktops & upstands
- Baths
- Shower trays & enclosures
- Wet rooms
About our bathroom resealing in Claygate
It is not only bathrooms. Worktop upstands, sink edges and splashback joints all take splashes every day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. We are often asked to deal with sealant that has split, shrunk or peeled away and leaking joints on a shower screen, on shower trays & enclosures, wet rooms and baths.
Smaller places like Claygate still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Claygate (KT10)
- Wider area
- Surrey
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Also near Claygate
More services for Claygate
Surface by surface
Shower trays & enclosures
There are usually two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both take water every day, so each is cut out and renewed with anti-fungal sanitary silicone.
Basins & vanity units
Basin joints are short and close to eye level: so we keep the line tidy and even, in white, clear or a colour to suit.
What we do, step by step
You do not need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the job takes around two hours for one bath or shower, longer for a whole bathroom in most cases. Parking around Claygate is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you are told the cure time, usually around 24 hours.
Before we arrive
- Let us know about earlier repairs to the joints
- Clear items away from the joints we are working on
- Let us know about stairs, lifts or work at height
Getting a quote
For a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Related advice
What happens if it’s left?
A quick bead over the top of the old one might look better for a while, but it cannot stick to what’s underneath. Water creeps under it and mould follows, so the next person has twice as much to remove. Around Claygate, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, call 0345 464 0079 or send us an email and we will give you an honest view and a quote.
Why book with us
- Anti-fungal silicone where joints get wet
- Domestic, commercial and hotel work
- ARBOMaster approved applicator
- We are fully insured
Take a look at our cost guide or our reviews.
Work for landlords, hotels and businesses
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.
In hotels, rooms out of use cost money, so the work can be planned room by room. We have worked in hotels as well as homes and businesses.
Claygate questions
Is Claygate in your area for bathroom resealing?
Yes, Claygate is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
Will you come out to Claygate?
Yes. Claygate is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you just seal over the old silicone?
No. New silicone won’t bond to old silicone, so it lifts and traps water and mould underneath. All the old sealant comes out first.
When can I use the bath or shower again?
We give you the cure time before we leave, and it’s usually around 24 hours. Getting it wet too early can spoil the new joint.
Do you remove the old sealant?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Where are you based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
What bathroom resealing looks like in Claygate
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Claygate Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as Church of Holy Trinity, walls and floors in older homes can move, and sealant and grout show it first. Letting a property close to Claygate station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Claygate is about 3 miles south-west of Surbiton, in Surrey. From the centre of Claygate to the outskirts, we cover bathroom resealing for every kind of property. Across Surrey, we cover 395 places, and Claygate is one of them. There’s also a page for London, roughly 14 miles from Claygate.
We cover every part of the KT10 postcode area for bathroom resealing and the streets around it. That includes homes and businesses on Church Road, High Street and Station Road. We also cover Barwell (1 mile south-east), Hinchley Wood (1 mile north), Esher (1 mile north-west), Hook (1 mile east) and Malden Rushett (2 miles south-east). We also work in nearby towns such as Guildford (13 miles south-west), Woking (11 miles west), Epsom (3 miles south-east), Horley (15 miles south-east), Redhill (11 miles south-east) and Ewell (4 miles east).
What’s near Claygate
Locally, jobs take us to homes and businesses close to Milbourne Lodge School, Claygate Common and Chessington Community College. Claygate has its own railway station: Claygate station. Nearby you will also find The Ashley Centre (3.6 miles south-east) and Epsom Cottage Hospital (2 miles south-east). Open spaces near Claygate include The Lake and Jubilee Wood.
How to look after the new joints
To keep the joints looking good and working properly:
- Wait for the cure time we give you
- Avoid abrasive pads on the sealant
- Run the extractor fan during and after every shower
- Wipe the sealant dry after showering
Keep bottles and razors off the sealant line, because they trap water against the silicone. A quick squeegee after showering helps the joint dry.
Don’t wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.
Can I do it myself?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.