Hampshire · England

Bathroom & kitchen resealing in Cheriton, Hampshire

Bath, shower, basin, wet room, worktop and sink resealing for Cheriton, backed by a 12-month guarantee. Ask us for a quote.

  • Leaks into the floor or ceiling below
  • A joint torn by a bath that flexes
  • Black mould in the silicone that will not clean off

Book bathroom resealing in Cheriton

About our bathroom resealing in Cheriton

A bead that has gone black, split or come away shouldn’t be left until there’s a leak. A photo of the joints helps when you phone 0345 464 0079 or email us, and we’ll give you a clear price for bathroom resealing in Cheriton. We work on sinks & splashbacks, basins & vanity units and baths, and the jobs we see most are gaps between the worktop and the wall and damp behind the bath or under the tray.

Somewhere as small as Cheriton, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.

Your job is guaranteed for a year, as with all our work.

Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall
Place
Cheriton (SO24)
Region
Hampshire
Cover
A year, on every job
Quotes
A clear quote up front
Phone
0345 464 0079
Last updated
26 October 2026

What bathroom resealing looks like in Cheriton

Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

In the older streets around Church of St Michael, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Cheriton is about 7 miles east of Winchester, in Hampshire. Across the SO24 area, our applicators can take on bathroom resealing. 683 places in Hampshire are on our list, from the larger towns to small villages. You can also see our page for Southampton, roughly 14 miles from Cheriton.

All of SO24 is covered for bathroom resealing. That includes homes and businesses on Lower Lamborough Lane, Raebarn Close and Markall Close and the roads around them. We also cover Hinton Ampner (1 mile east), Beauworth (2 miles south-west), Bramdean (2 miles east), New Alresford (2 miles north) and Bishop's Sutton (3 miles north-east). We also work in nearby towns such as Basingstoke (15 miles north), Winchester (7 miles west), Havant (15 miles south-east), Eastleigh (10 miles south-west), Fareham (14 miles south) and Horndean (12 miles south-east).

Local landmarks in Cheriton

Typical jobs here are in homes near The Flowerpots Inn and the streets around them. The countryside around Cheriton includes Beacon Hill and Shutts Copse.

Map of Cheriton © OpenStreetMap contributors

For landlords and businesses

Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

We work for landlords and letting agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.

Different surfaces, different methods

Baths

Most bath leaks begin along the long edge, especially under a shower. We finish it with a single, even bead of anti-fungal silicone, tooled so water cannot sit on it.

Basins & vanity units

The back of a basin gets wet every time someone washes. Old sealant there often goes black at the corners, so it’s cut out and renewed just like a bath joint.

What we are called out for in Cheriton

Silicone needs a clean, dry surface without any grease to stick to. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.

These are the problems we are asked about most:

  • A bead that has pulled away from the tiles
  • Smears of silicone across the tiles
  • Mouldy sealant that has gone black
  • A joint torn by a bath that flexes

For site and facilities teams at buildings such as Cheriton Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Questions to ask before booking

  • Is the old sealant removed completely?
  • What the cure time is
  • How the colour is chosen
  • Are they insured?

Our hiring checklist

How the visit works

On the day, we start by going over the job with you, so there are no surprises. We protect the surfaces around the joints before we start. The work usually takes half a day or less for one room, longer when the kitchen is included. For a village or hamlet like Cheriton, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. First, each joint is checked for movement and signs of water.
  2. The old silicone is cut out completely, along with the film it leaves on the tiles.
  3. Joints are degreased and any mould is treated.
  4. With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
  5. We tool the bead to a neat finish and give you the cure time, generally around 24 hours.

Preparing for the visit

  • Let us know about parking restrictions
  • For business premises, tell us about site rules or sign-in
  • Move anything stored near the joints

How to get a quote

Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we will come back to you with a quote.

Get a price

Advice

Common questions in Cheriton

Can you do bathroom resealing in Cheriton?

Yes, Cheriton is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job, and we will send you a clear quote.

Is Cheriton within the area you cover?

Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Can you get rid of the black mould in my sealant?

Yes, we can. We strip the bead, treat the joint and lay new anti-fungal silicone.

Should I try DIY first?

That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.

Can new silicone go straight over the old?

No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.

Do you reseal kitchen worktops and sinks too?

Yes. Worktops, sinks and splashbacks are all part of the job, in a kitchen-suitable sealant, matched to the worktop where it’s on show.

Can you quote for more than one area?

Yes, we can. More than one area can be quoted together.

How long does the new silicone need before I use the shower?

After around 24 hours in most cases. You’ll get the exact cure time before we leave.

Why deal with it now?

Fresh sealant smartens a bathroom or kitchen with very little disruption, which helps when a home is being let or put on the market. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. Where a wall is exposed, as many are in small places like Cheriton, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, call 0345 464 0079 or email us for an honest opinion and a quote.

Why Cheriton customers choose us

  • ARBOMaster approved applicator
  • We leave the area clean and tidy
  • Colour agreed with you before we start
  • 180+ five-star Google reviews

Take a look at how sealant jobs are priced and our reviews.

When something else is needed

We won’t take on work that won’t last, so these are the limits:

  • A bath or tray that moves because it is not properly supported
  • Cracks in the tray itself rather than the joint
  • Tiles that have come away from the wall

If in doubt, ring 0345 464 0079 or drop us an email and we will say what we think before booking.

Where we work in Cheriton

  • Wet rooms
  • Kitchen worktops & upstands
  • Basins & vanity units
  • Sinks & splashbacks
  • Shower trays & enclosures
  • Baths

Aftercare tips

Aftercare is simple:

  • Do not let bottles sit on the bead
  • Wipe up water along the back of the worktop
  • Never pick at the silicone with a blade
  • Clean with a mild bathroom cleaner and a soft cloth

Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.

A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job