Hampshire · England
Bramdean Bathroom Resealing
Problem with your baths, showers and worktops in Bramdean? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Gaps between the worktop and the wall
- Damp behind the bath or under the tray
- Cracked, shrunken or lifting silicone
What happens on the day
The work is kept neat and contained to the joints we’re treating, so you can carry on as normal. The job usually takes two to three hours for a typical bath, depending on how much old sealant there is. In a small place like Bramdean, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Preparing for the visit
- Let us know about earlier repairs to the joints
- Let us know if you’ve seen damp or leaks
- Try not to wet indoor joints just before the visit
Getting a quote
For a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
Related advice
About our bathroom resealing in Bramdean
Across Bramdean, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Every joint is cut out, cleaned and left dry before it’s resealed. We work on basins & vanity units, baths and sinks & splashbacks, and the jobs we see most are a joint torn by a bath that flexes and cracked, shrunken or lifting silicone.
Around Bramdean, it’s houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.
- Place
- Bramdean (SO24)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
When it is not the sealant
In fairness, there are a few things sealant will not fix:
- A tray or bath that’s cracked through
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Loose or hollow tiles, or failed tanking behind them
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.
Surfaces we seal
- Sinks & splashbacks
- Shower trays & enclosures
- Baths
- Kitchen worktops & upstands
- Wet rooms
- Basins & vanity units
What we’re called out for in Bramdean
Mould is the reason many people want their sealant replaced. Steamy rooms that do not dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
These are the problems we’re asked about most:
- Shrunken sealant along the back of a worktop
- A joint torn by a bath that flexes
- A bead that has pulled away from the tiles
- Failed sealant on the screen profile
Homes close to Church of St Simon and St Jude include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
What to look for in a quote
- What happens if the job turns out different
- How the colour is chosen
- What guarantee comes with the work
- What the quote includes, VAT included or not
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
Keeping the joints in good condition
How long the joints last depends on use and care. Here’s what we suggest:
- Keep scourers and sharp tools away from the bead
- Squeegee the walls and tray after use
- Keep the fan on for a while after bathing
- Let new sealant cure fully before it gets wet
Treat the new bead gently when you clean: warm soapy water and a soft cloth do the job. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
Don’t wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and renewing it as soon as it fails protects everything around it.
What else we do in Bramdean
Bathrooms and kitchens in Bramdean
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Around Bramdean, as everywhere, bathroom resealing is only as good as the preparation behind it.
Bramdean is about 8 miles east of Winchester, in Hampshire. For bathroom resealing in and around Bramdean, please call 0345 464 0079 or send us an email for a quick quote. We cover Hampshire from our Crawley base. Our Hampshire coverage runs to 683 places, Bramdean among them. You can also see our page for Southampton, roughly 15 miles from Bramdean.
Work in SO24 is quoted and booked the same way as anywhere else. We cover properties on Wood Lane, Woodlane Close and The Spinney. We also cover the places around Bramdean: Hinton Ampner (1 mile west), Cheriton (2 miles west), Bishop's Sutton (2 miles north), Beauworth (3 miles south-west) and Warnford (3 miles south). Further out, we also cover Basingstoke (15 miles north), Winchester (8 miles west), Havant (14 miles south-east), Eastleigh (11 miles south-west), Fareham (14 miles south) and Horndean (11 miles south-east).
Landmarks near Bramdean
Around Bramdean, our work takes us to homes and buildings near The Fox Inn. For a walk, there’s Shutts Copse and Beacon Hill.
What affects the cost of bathroom resealing
You will get a clear quote before work begins. It’s based on:
- The type of sealant required
- Working hours on commercial sites
- The number of rooms or windows
- Whether old sealant or filler has to be cut out
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Helping us quote
There’s no need for technical detail. Just tell us:
- Photos by email, if that is easy
- The rough size of the job
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you’re ready, phone 0345 464 0079 or send us an email.
Should I try it myself first?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Your questions about bathroom resealing in Bramdean
Is Bramdean within the area you cover?
Yes. Bramdean is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you cover Bramdean for bathroom resealing?
Yes, Bramdean is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or email us and let us know what needs doing, and we’ll give you a clear price.
Is white the only colour available?
Most people choose white or clear, but other colours can be used to suit tiles and worktops. Let us know your preference when you ask for a quote.
Do you guarantee your resealing?
Yes, for 12 months. Looking after the joint as we suggest helps it last.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or follow the cure time we give you.
Do you have insurance?
Yes. We are fully insured.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Is it OK to put new sealant on top of the old bead?
No. New silicone will not bond to old silicone, so it lifts and traps water and mould underneath. We always take the old sealant out completely.