Buckinghamshire · England
Bathroom & kitchen resealing in Chalkshire, Buckinghamshire
Bathroom resealing across Chalkshire and nearby, with old sealant always removed completely and a 12-month guarantee.
- Gaps where the bath or tray has moved
- Damp behind the bath or under the tray
- Gaps between the worktop and the wall
When to call us in Chalkshire
With age, silicone loses its stretch. Along worktops it tends to pull back from the wall, leaving a thin gap where water and food collect. Hot pans and harsh cleaners don’t help.
It’s worth asking for a quote if you see:
- Shrunken sealant along the back of a worktop
- Cracked, shrunken or lifting silicone
- A joint torn by a bath that flexes
- Black spots spreading through the bead
In the older streets around Church of St Peter and St Paul, walls and floors in older homes can move, and sealant and grout show it first.
What your quote should include
- How much experience the applicator has
- Whether they seal over old material or remove it
- When the joint can take water or movement
- How the surfaces are prepared before sealing
About our bathroom resealing in Chalkshire
A fresh bead of silicone changes how a bathroom looks more than most people expect. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. We’re often asked to deal with black spots spreading through the bead and gaps where the bath or tray has moved, on baths, basins & vanity units and sinks & splashbacks.
Homes around Chalkshire are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Place
- Chalkshire (HP17)
- Region
- Buckinghamshire
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
How the job changes by surface
Baths
The long joint down the side of a bath is where most leaks start, particularly where there’s a shower over the bath. It gets one smooth bead of anti-fungal silicone.
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They’re resealed with anti-fungal sanitary silicone, and our work is on the visible joints only.
Landlords, agents and businesses in Chalkshire
Housing providers, facilities teams and property managers book us too in Chalkshire and across Buckinghamshire. Several sites can go on one quote, and we’re fully insured for the work.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Nearby places to Chalkshire
More services for Chalkshire
When it is not the sealant
We will always be straight with you, so here’s what sealant cannot fix:
- Water coming from the plumbing rather than the joint
- Loose or hollow tiles, or failed tanking behind them
- Cracked or missing grout between tiles (that is regrouting)
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
Where we work in Chalkshire
- Baths
- Sinks & splashbacks
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
How the visit works
At the end, we look at the finished work together and explain the cure time. The work normally takes a couple of hours for a single bath or shower, depending on how much there is to do. Somewhere like Chalkshire needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
Before we arrive
- Clear items away from the joints we are working on
- For indoor joints, keep the area dry beforehand if you can
- Let us know if you’ve seen damp or leaks
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Read more
Bathrooms and kitchens in Chalkshire
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Rented homes near Little Kimble station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. Managing a site like John Colet School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Chalkshire is about 4 miles south of Aylesbury, in Buckinghamshire. Jobs in Chalkshire get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. We cover 263 towns and villages across Buckinghamshire, large and small. Oxford is on our list too, about 19 miles from Chalkshire.
Here we cover the HP17 postcode area for bathroom resealing. Neighbouring places we cover for bathroom resealing include Terrick (1 mile north), Butler's Cross (1 mile south), Nash Lee (1 mile north), Ellesborough (1 mile south-west) and Coombe (1 mile south). Further out, we also cover Aylesbury (4 miles north), High Wycombe (9 miles south), Chesham (8 miles south-east), Marlow (13 miles south), Amersham (10 miles south-east) and Beaconsfield (12 miles south-east).
Around Chalkshire
We work in homes and buildings around The Russell Arms and the streets around them. Chalkshire’s nearest station is Little Kimble station, about 1.3 miles south-west of the centre. Other landmarks nearby include Little Kimble Motte (1.1 miles south-west) and Stoke Mandeville Hospital (2.7 miles north). Open spaces near Chalkshire include Brush Hill Local Nature Reserve and Coombe Hill.
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- Give the silicone its full cure time
- Dry worktop joints after washing up
- Use gentle cleaners on the silicone
- Open a window or run the fan so the room dries
Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning usually won’t remove it, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.
Your questions about bathroom resealing in Chalkshire
Do you work for landlords with property near Little Kimble station?
Yes, we work for landlords and agents. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.
Will you come out to Chalkshire?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you work on commercial sites?
Yes, regularly. Larger jobs can be planned room by room or area by area.
Does the resealing come with a guarantee?
Yes. Our one-year guarantee covers every job, and we’re fully insured.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we’re fully insured.
Do you have insurance?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.