Surrey · England
Bathroom & kitchen resealing in Burgh Heath, Surrey
Baths, showers and worktops in Burgh Heath need attention? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- Water getting behind the bath panel
- A joint torn by a bath that flexes
- Smears of silicone across the tiles
About our bathroom resealing in Burgh Heath
Sealant that’s mouldy, cracked or peeling is worth sorting before it lets water through. Just phone 0345 464 0079 or drop us an email with a photo of the joints, and you’ll get a clear quote before any work starts. If you have splits where the tray meets the wall and water escaping at the shower enclosure, we can put it right, on baths, shower trays & enclosures and basins & vanity units alike.
For a small place like Burgh Heath, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Your job is guaranteed for a year, as with all our work.
- Where
- Burgh Heath (KT20)
- Wider area
- Surrey
- Guarantee
- 12 months on all our work
- Quote
- A clear price before we start
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
To keep the joints looking good and working properly:
- Keep scourers and sharp tools away from the bead
- Squeegee the walls and tray after use
- Move toiletries away from the joint
- Let new sealant cure fully before it gets wet
Treat the new bead gently when you clean: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning generally won’t remove it. Replacing the sealant early keeps the job small.
Nearby places to Burgh Heath
Other services in Burgh Heath
What the job involves on each surface
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A sound joint along the back edge stops that.
Wet rooms
Wet room floors move slightly as they’re used, so the internal corners need silicone rather than grout. Where grout in a corner has cracked, we can replace it with sealant.
Burgh Heath questions
Will you come out to Burgh Heath?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you cover Burgh Heath for bathroom resealing?
Yes, Burgh Heath is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can you just seal over the old silicone?
No. Fresh silicone can’t stick to the old bead, so it peels away and hides mould and water. We always take the old sealant out completely.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us, and we’re fully insured.
How long does a bath or shower reseal take?
One bath or shower is around two hours’ work, old sealant removal included. A full bathroom and kitchen can take most of a day.
Do you work for letting agents?
Yes, often. We can quote for several properties at once.
Is white the only colour available?
White, clear and a range of colours are available. Where the joint is on show, we match it to the surface.
Landlords, agents and businesses in Burgh Heath
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
Why deal with it now?
A quick bead over the top of the old one might look better for a while, but it won’t bond. Water creeps under it and mould follows, so the next person has twice as much to remove. Older cottages and farmhouses around Burgh Heath can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- We agree the colour with you first
- Domestic, commercial and hotel work
- Anti-fungal sanitary silicone in wet areas
- Colour picked to suit the job
Take a look at our cost guide and customer reviews.
Bathroom resealing in Burgh Heath: local notes
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Kingswood station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. Managing a site like Aberdour School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. In the older streets around St Mary's, older homes can move a little, which is hard on rigid grout and tired sealant.
Burgh Heath is about 3 miles south-east of Epsom, in Surrey. If you need bathroom resealing in Burgh Heath, please phone 0345 464 0079 or email us for a quick quote. We cover Surrey from our Crawley base. Our area takes in 395 places across Surrey, from the larger towns to small villages. Our London page covers work nearby.
We cover every part of the KT20 postcode area for bathroom resealing and the streets around it. Bathroom resealing is available to properties on Brighton Road, Heathdene and Can Hatch and the roads around them. Nearby, we also carry out bathroom resealing in Great Burgh (1 mile west), Nork (1 mile north), Tattenham Corner (1 mile west), Epsom Downs (2 miles north-west) and Langley Vale (2 miles west). Further out, we also cover Woking (15 miles west), Epsom (3 miles north-west), Horley (9 miles south), Redhill (5 miles south-east), Ewell (4 miles north-west) and Reigate (5 miles south).
What’s near Burgh Heath
Typical jobs here are in homes near Merland Rise Recreational Ground, The Beacon School and Kingswood Arms and the streets around them. The closest station to Burgh Heath is Kingswood station, about 1 mile south. Other landmarks nearby include The Ashley Centre (2.8 miles north-west) and Walton on the Hill (2.3 miles south-west). For a walk, there’s Colley Hill and Cuddington Meadows.
What affects the cost of bathroom resealing
We do not publish a price list, because jobs vary so much. What we look at:
- How many areas need sealing
- The old material and how stubborn it is
- The size of the job
- The product the joint needs
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we will explain what it covers.
What to tell us for a quote
Photos by email are helpful but not essential. Please mention:
- The rough size of the job
- If someone has resealed it before
- Whether it’s a home or a business
- Access, such as stairs, a lift or height
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand.
The process
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a couple of hours for a single bath or shower. Somewhere as small as Burgh Heath, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Let us know if you’ve seen damp or leaks
- For business premises, tell us about site rules or sign-in
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
For a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We will give you a clear quote before any work starts.
Read more
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.