Buckinghamshire · England
Bathroom & kitchen resealing in Bishopstone, Buckinghamshire
Our applicators work in Bishopstone on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Gaps where the bath or tray has moved
- Black mould in the silicone that won’t clean off
- New sealant laid over old sealant that is now lifting
About our bathroom resealing in Bishopstone
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through and into the wall or floor. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. We work on sinks & splashbacks, baths and basins & vanity units, and common reasons people get in touch are black spots spreading through the bead and a bead that has pulled away from the tiles.
Being in a small place like Bishopstone makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
A 12-month guarantee comes as standard.
- Location
- Bishopstone (HP17)
- Region
- Buckinghamshire
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Looking after it afterwards
How long the joints last depends on use and care. We suggest:
- Wipe the sealant dry after showering
- Give the silicone its full cure time
- Keep bottles off the sealant line
- Use gentle cleaners on the silicone
Give the silicone time to cure before it gets wet, following the cure time we give you. Once it’s cured, wiping it down after use keeps it looking new.
Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
Also near Bishopstone
What else we do in Bishopstone
Leave it or put it right?
Sorting it now is quick: it takes a morning or an afternoon for most single baths and showers. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Older cottages and farmhouses around Bishopstone can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please call 0345 464 0079 or email us and we’ll talk you through it.
Why Bishopstone clients choose us
- Experience in homes, commercial sites and hotels
- Full insurance on every job
- Approved under the ARBOMaster scheme
- Old sealant always removed completely
Read what affects the cost or what customers say.
For landlords and businesses
Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
We work for landlords and agents as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
What happens on the day
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself normally takes a morning or an afternoon for most single baths and showers, depending on the size of the job. Somewhere like Bishopstone needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We protect the area and cut out all of the old sealant, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, normally after around 24 hours.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Move anything stored near the joints
- Let us know about earlier repairs to the joints
Getting a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we will explain what’s involved.
Read more
What we can’t put right
It helps to know what we cannot do too:
- Tiles that have come away from the wall
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Failed grout lines across the wall
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.
What we seal
- Kitchen worktops & upstands
- Wet rooms
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Sinks & splashbacks
Surface by surface
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, sealing the side the enclosure’s instructions call for.
Sinks & splashbacks
The edge of an inset sink is a common place for water to get under the worktop. Where the sealant around the visible edge has failed, we renew it.
What bathroom resealing looks like in Bishopstone
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Aylesbury station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For site and facilities teams at buildings such as The Mandeville School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Bishopstone is about 2 miles south of Aylesbury, in Buckinghamshire. Every kind of property in Bishopstone can book us for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Our area takes in 263 places across Buckinghamshire. You can also see our page for Oxford, roughly 17 miles from Bishopstone.
Here we cover the HP17 postcode area for bathroom resealing. You will find streets such as Bishopstone, Furlong Crescent and Moreton Lane. We also cover the places around Bishopstone: Sedrup (1 mile north), Walton Court (1 mile north-east), Ford (2 miles west), Upton (2 miles west) and Little Kimble (2 miles south-east). We also work in nearby towns such as High Wycombe (11 miles south), Chesham (11 miles south-east), Marlow (15 miles south), Amersham (13 miles south-east), Beaconsfield (15 miles south-east) and Elmhurst (3 miles north-east).
Local landmarks in Bishopstone
We work in homes and buildings around The Harrow pub and the streets around them. The nearest railway station is Aylesbury station, roughly 2.1 miles north-east of the centre. Well-known places in the area include National Paralympic Heritage Centre (1.9 miles north-east) and Friars Square (2.2 miles north-east). Not far away are Brush Hill Local Nature Reserve and Beacon Hill.
Common questions in Bishopstone
Is Bishopstone in your area for bathroom resealing?
Yes, Bishopstone is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.
Can you help a landlord with a rental near Aylesbury station?
Yes, we work for landlords and agents. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will send you a clear quote.
Is white the only colour available?
There’s a choice: white, clear and colours to suit tiles and worktops. We will talk it through when we quote.
What do you need from me for a quote?
Just the basics: where it is, what you’ve noticed and how we reach it. Then call 0345 464 0079 or send us an email.
Can you reseal around my kitchen sink and worktop?
Yes, often alongside a bathroom. Where it’s needed by the sink, we use a food-safe sealant.
Can you get rid of the black mould in my sealant?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Does the resealing come with a guarantee?
Yes, a one-year guarantee. Looking after the joint as we suggest helps it last.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.