Hampshire · England
Bathroom & kitchen resealing in Belbins, Hampshire
Our applicators work in Belbins on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- A reseal done over the top of the old bead
- Water getting behind the kitchen upstand
- Lumpy, uneven sealant from a DIY attempt
Bathroom resealing for homes and businesses in Belbins
Homes in Belbins have the same weak spots as anywhere else: bath edges, tray joints, basin backs and kitchen upstands. Each one is stripped, cleaned and dried before new silicone goes in. We work on wet rooms, kitchen worktops & upstands and shower trays & enclosures, and people most often call us about black mould in the silicone that won’t clean off and cracked, shrunken or lifting silicone.
For a small place like Belbins, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
All our work comes with a 12-month guarantee.
- Location
- Belbins (SO51)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Belbins questions
I let a flat near Romsey station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Is Belbins in your area for bathroom resealing?
Yes, Belbins is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.
Do you do kitchens as well as bathrooms?
Yes. Next to the sink we use a food-safe product where it’s needed.
Can new silicone go straight over the old?
No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.
Is the work guaranteed?
Yes. Our 12-month guarantee covers every job, and we’re ARBOMaster approved applicators.
How long will the resealing take?
Allow a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. We’ll confirm how long your job needs when we quote.
Do the sealants smell?
Sometimes, a little. Any smell clears as the sealant cures.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected.
How we quote for bathroom resealing
Every job gets its own quote. This is what makes a difference:
- Whether there’s mould to deal with
- Which sealant suits the joint
- The number of rooms or windows
- The size of the job
Doing several joints on one visit is usually more efficient than separate visits. We’ll give you a clear price for the lot.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Whether it has been sealed before
- The address or postcode of the job
- Photos by email, if that’s easy
- The rough size of the job
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or email us.
Why deal with it now?
Bleach and mould sprays may lighten black marks for a while, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again. In a small place like Belbins, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Leaving a failed joint normally makes the job bigger, not smaller. If you’re not sure whether it needs doing, call 0345 464 0079 or email us for an honest opinion and a quote.
Why us?
- We never seal over old sealant
- Anti-fungal sanitary silicone in wet areas
- Colour agreed with you before any work starts
- A sealant colour to suit the surroundings
See our cost guide and our reviews.
Different surfaces, different methods
Shower trays & enclosures
There are generally two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both get soaked every time the shower runs, so each is cut out and renewed with anti-fungal sanitary silicone.
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. Water that gets behind can damage the unit, so the joint is sealed in one unbroken line.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Do not leave water standing on kitchen joints
- Run the extractor fan during and after every shower
- Wipe the sealant dry after showering
- Wait for the cure time we give you
Check the sealant now and then. A small split or a corner lifting is easy to spot, and if anything looks wrong, just phone 0345 464 0079 or email us.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and replacing it when it fails protects the rest of the room.
DIY sealant or a professional job?
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Landlord and commercial work in Belbins
Landlords and letting agents in Belbins can book us as well as householders. Resealing between tenancies keeps a property looking cared for.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will quote.
The process
We work through the job in order: protect, prepare, seal, tidy. Typically it takes around two hours for one bath or shower, longer for a whole bathroom, and the area is left clean. For a village or hamlet like Belbins, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, usually around 24 hours.
Getting ready for the visit
- Try not to wet indoor joints just before the visit
- On commercial sites, let us know about site rules
- Mention if the joints have been sealed before
How to get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you are ready, ring 0345 464 0079 or drop us an email.
Advice
What bathroom resealing looks like in Belbins
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For landlords with property near Romsey station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. In the older streets around Church of St Andrew, older homes can move a little, which is hard on rigid grout and tired sealant. If you look after a building such as Cupernham Junior School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Belbins is about 1 mile north of Romsey, in Hampshire. Homes, rented property, offices and hotels in Belbins can book us for bathroom resealing, old or new, large or small. The work is guaranteed for a year. 683 places in Hampshire are on our list. Our Southampton page covers work nearby (8 miles or so).
Work in SO51 is quoted and booked the same way as anywhere else. Local streets include Belbins and Yokesford Hill, all of which we cover. Other places close to Belbins include Abbotswood (1 mile south-east), Braishfield (1 mile north-east), Crampmoor (2 miles south-east), Lower Slackstead (2 miles east) and Gosport (3 miles east). Larger places within reach include Winchester (8 miles north-east), Eastleigh (7 miles south-east), Andover (14 miles north), Totton (7 miles south), Chandler's Ford (5 miles south-east) and Hedge End (11 miles south-east).
Local landmarks in Belbins
Around Belbins, our work takes us to homes and buildings near Stanbridge Earls School, The Romsey School and The Dog & Crook pub. Belbins’s nearest station is Romsey station, roughly 1.4 miles south of the centre. Nearby you will also find King Johns House (1.6 miles south) and Romsey Community Hospital (1.5 miles south). Not far away are Emer Bog and Baddesley Common.