Hampshire · England
Bathroom Resealing in Beech
Problem with your baths, showers and worktops in Beech? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- New sealant laid over old sealant that is now lifting
- Splits where the tray meets the wall
- Lumpy, uneven sealant from a DIY attempt
How we handle bathroom resealing in Beech
Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across Beech. We’re ARBOMaster approved and fully insured, and the work comes with a 12-month guarantee. Typical jobs include black spots spreading through the bead and two layers of silicone, both failing, on sinks & splashbacks, baths and kitchen worktops & upstands.
In a village or hamlet like Beech, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Place
- Beech (GU34)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Keep the fan on for a while after bathing
- Avoid abrasive pads on the sealant
- Squeegee the walls and tray after use
- Keep an eye on the corners, where splits start
Do not stand bottles along the bead, because they trap water against the silicone. A quick squeegee after showering keeps water from sitting on the joint.
Small signs come before a leak: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. Any of these means the joint needs attention.
How the job changes by surface
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A sound joint along the back edge stops that.
Wet rooms
In a wet room, the joints between floor and walls take standing water. They get anti-fungal sanitary silicone, working on the surface joints, not the tanking or drainage.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
How it works
All our tools and materials come with us in the van, so you do not need to buy or prepare anything. After a quick look at the joints together, we protect the area and start. It normally takes around two hours for one bath or shower, longer for a whole bathroom. Somewhere like Beech needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Getting ready for the visit
- Clear the area around the work
- Tell us if parking is tricky
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we’ll explain what’s involved.
Related advice
Landlord and commercial work in Beech
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
How we quote for bathroom resealing
You’ll get a clear quote before any work starts. It’s based on:
- The amount of work
- Mould in or behind the old joints
- The type of sealant required
- How easy the joints are to reach
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Where the property is
- Any previous sealing or DIY work
- A few photos by email, if you can
- The rough size of the job
Every job is quoted individually, so the first step is telling us about yours. Just ring 0345 464 0079 or email us with the details and send photos if you have them.
Common problems we fix in Beech
No sealant lasts indefinitely. Every shower, every splash and every wipe with a cleaner take their toll over the years, so its life depends on how the room is used, cleaned and aired.
Common reasons people contact us are:
- Leaks into the floor or ceiling below
- A messy, uneven bead from a previous reseal
- Black mould in the silicone that won’t clean off
- A reseal done over the top of the old bead
If you look after a building such as Amery Hill School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Questions to ask before you book
- What preparation is included
- The length of the guarantee
- Whether they’re fully insured
- Is the old sealant removed completely?
Bathroom resealing around Beech
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Alton station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. If you live in an older home near St Peter's, walls and floors in older homes can move, and sealant and grout show it first.
Beech is about 2 miles west of Alton, in Hampshire. Wherever you are in the GU34 postcode area, our applicators can take on bathroom resealing. Across Hampshire, we cover 683 places, Beech among them. Our Reading page covers work nearby, about 21 miles away.
Work in GU34 works the same way as everywhere else we cover. That includes homes and businesses on Wellhouse Road, Medstead Road and King's Hill and the roads around them. Close by, we work in Thedden (1 mile north-west), Wivelrod (1 mile west), Bentworth (2 miles north-west), Holt End (2 miles west) and New Copse (2 miles west). Within a short drive, we also cover Basingstoke (9 miles north-west), Winchester (14 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (13 miles north-east) and Petersfield (10 miles south).
Local landmarks in Beech
For rail, the closest station is Alton station, about 2.2 miles east. Nearby you will also find Barton Castle (4.3 miles west) and Alton Community Hospital (1.2 miles east). Open spaces near Beech include King's Hill.
Other services in Beech
FAQs for Beech
Is Beech within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for landlords with property near Alton station?
Yes. We work for landlords and letting agents as well as householders. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we will send you a clear quote.
How much does bathroom resealing cost in Beech?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You will get a clear quote before we start.
Can you get rid of the black mould in my sealant?
Yes, we can. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
How long does a bath or shower reseal take?
It takes a morning or an afternoon for most single baths and showers. You will know how long to expect before we start.
What colours of sealant can you use?
We can use white, clear or a colour to suit. On a worktop we colour-match where the joint shows.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected, and we clear up when we’re done.
Is it OK to put new sealant on top of the old bead?
No. New silicone will not bond to old silicone, so it peels away and hides mould and water. All the old sealant comes out first.