Kent · England

Bathroom Resealing in Bedgebury Cross

Bathroom resealing for Bedgebury Cross and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.

  • A messy, uneven bead from a previous reseal
  • Black mould in the silicone that will not clean off
  • Splits where the tray meets the wall

Bathroom resealing in Bedgebury Cross

How we handle bathroom resealing in Bedgebury Cross

The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. When it splits, shrinks or turns black, water gets behind it and into the wall or floor. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. If you have a bead that has pulled away from the tiles and water escaping at the shower enclosure, we can put it right.

Around Bedgebury Cross, it’s houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.

Big or small, you get the same 12-month guarantee in Bedgebury Cross and across Kent.

Mr Mastic applicator smiling as he applies silicone to the corner of a bath
Location
Bedgebury Cross (TN17)
Wider area
Kent
Cover
12 months on all our work
Quotes
A clear quote up front
Call
0345 464 0079
Last updated
26 October 2026

Bathrooms and kitchens in Bedgebury Cross

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

Around Bedgebury Cross, as everywhere, bathroom resealing is only as good as the preparation behind it. For an older house near a landmark such as Christ Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.

Bedgebury Cross is about 9 miles south-east of Royal Tunbridge Wells, in Kent. We carry out bathroom resealing for homes and businesses in Bedgebury Cross and the surrounding area. 922 places in Kent are on our list, from the larger towns to small villages. Our Crawley page covers work nearby, about 28 miles away.

All of TN17 is covered for bathroom resealing. Whether your property is on Bedgebury Road and Lady Oak Lane or a nearby road, our applicators can take on the job. We also cover the places around Bedgebury Cross: Riseden (1 mile north-west), Kilndown (1 mile west), Stonecrouch (2 miles south-west), Flimwell (2 miles south) and Three Leg Cross (3 miles south-west). Larger places within reach include Maidstone (13 miles north), Royal Tunbridge Wells (9 miles north-west), Tonbridge (11 miles north-west), Kings Hill (13 miles north), Foley Park (14 miles north) and Paddock Wood (7 miles north-west).

What’s near Bedgebury Cross

Well-known places in the area include Ticehurst House Hospital (3.5 miles south-west) and Old Scotney Castle (1.7 miles west). Open spaces near Bedgebury Cross include Bewl Water.

Map of Bedgebury Cross © OpenStreetMap contributors

Work for landlords, hotels and businesses

We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.

Landlords and agents in Bedgebury Cross can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.

Quotes for bathroom resealing in Bedgebury Cross

The price is agreed before any work begins. It takes into account:

  • When we can work, for business premises
  • Access and height
  • Which sealant suits the joint
  • How much there is to do

Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll go through it with you.

Helping us quote

When you call or email, it’s useful to know:

  • Whether it’s a home or a business
  • Where the property is
  • Photos by email, if that’s easy
  • Roughly how big the job is

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.

How it works

There’s no need to move everything out, only the area right around the joints. We protect the rest, and the work takes a couple of hours for a single bath or shower for a typical job. In a small place like Bedgebury Cross, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. First, each joint is checked for movement and signs of water.
  2. Every trace of the old bead is removed, including the thin smear on the tiles.
  3. Joints are degreased and any mould is treated.
  4. When the joint is dry, and a bath has been filled with water, the new silicone goes on.
  5. We tool the bead to a neat finish and give you the cure time, usually around 24 hours.

Before we arrive

  • Plan for the work area to be out of bounds to pets and children
  • Tell us about any water getting in
  • On commercial sites, let us know about site rules

Get a quote

Want a quote for bathroom resealing? Please ring 0345 464 0079 or drop us an email and tell us about the job. We’ll explain what we’d do and give you a clear quote before we start.

Get a quick quote

Related advice

What we can’t put right

We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:

  • Water coming from the plumbing rather than the joint
  • A cracked shower tray or bath (that needs repair or replacement)
  • Damage behind the tiles that needs a tiler

Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly.

What we seal

  • Baths
  • Wet rooms
  • Kitchen worktops & upstands
  • Shower trays & enclosures
  • Sinks & splashbacks
  • Basins & vanity units

Questions from Bedgebury Cross

Is Bedgebury Cross in your area for bathroom resealing?

Yes. We work across London and the South East, and Bedgebury Cross is part of that. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.

Is there a guarantee on bathroom resealing in Bedgebury Cross?

Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.

Where is Mr Mastic based?

Our base is in Crawley, and we work across South East England, London and Scotland.

How long before the new sealant can get wet?

After around 24 hours in most cases. We will tell you the cure time for the product we used.

Do you work for landlords and businesses?

Yes, regularly. Several properties can be quoted together, and between tenancies is a good time for the work.

Can you do several jobs on one visit?

Yes, we can. Several rooms, windows or areas can go on one quote.

Can you just seal over the old silicone?

No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.

Will you leave a mess?

No. The area is protected while we work and cleaned up afterwards.

Should I try it myself first?

Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. We suggest:

  • Run the extractor fan during and after every shower
  • Dry the bead with a towel now and then
  • Check the joints every few months for splits or lifting
  • Don’t leave water standing on kitchen joints

Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.

There’s no need to wait for a full refurbishment. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.

What the job involves on each surface

Baths

Most bath leaks begin along the long edge, particularly where there’s a shower over the bath. We finish it with a single, even bead of anti-fungal silicone, tooled so water cannot sit on it.

Kitchen worktops & upstands

Upstands and back edges are cut out, cleaned of grease and resealed, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job