Hampshire · England
Bathroom & kitchen resealing in Ashford, Hampshire
We cover Ashford for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly.
- Leaks into the floor or ceiling below
- Splits where the tray meets the wall
- Mouldy sealant that has gone black
Questions from Ashford
Is Ashford within the area you cover?
Yes, Ashford is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you cover Ashford for bathroom resealing?
Yes. We work across London and the South East, and Ashford is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
How long will the resealing take?
One bath or shower is around two hours’ work, including cutting out the old sealant. A whole bathroom plus the kitchen may take most of the day.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
What information do you need?
A short description and the location. If we need more, we’ll ask.
Can you just seal over the old silicone?
No, never. Sealing over the top looks fine for a few weeks, then lifts, because silicone does not bond to silicone. We remove the old bead completely before resealing.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often happy for the work to be arranged.
Can I choose the colour of the sealant?
Most people choose white or clear, and other colours are available to suit tiles, trays and worktops. Tell us what you’d like when you get in touch.
Bathroom resealing in Ashford
A fresh bead of silicone changes how a bathroom looks more than most people expect. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. We work on kitchen worktops & upstands, wet rooms and basins & vanity units, and common reasons people get in touch are new sealant laid over old sealant that is now lifting and black spots spreading through the bead.
Somewhere as small as Ashford, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Each job carries a 12-month guarantee, large or small.
- Location
- Ashford (SP6)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Towns and villages near Ashford
More services for Ashford
What happens if it’s left?
Running new silicone over the old joint can look tidy for a few weeks, but it cannot stick to what’s underneath. It lifts, traps water and grows mould behind it, and the next reseal means two layers to cut out. Where a wall is exposed, as many are in small places like Ashford, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.
Why Ashford customers choose us
- 20+ years of sealant experience
- Every job guaranteed for a year
- Domestic, commercial and hotel work
- A sealant colour to suit the surroundings
Read our cost guide or our reviews.
Bathroom resealing in Ashford: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Around Ashford, as everywhere, bathroom resealing is only as good as the preparation behind it.
Ashford is in Hampshire. Ashford gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 683 places across Hampshire, from the larger towns to small villages. We also work in Southampton, around 18 miles away.
Postcode districts we cover here for bathroom resealing: SP6. Streets in the area include Station Road, Rookwood Gardens and Ashford Close, and we cover them all. Nearby, we also carry out bathroom resealing in Sandleheath (1 mile west), Alderholt (2 miles south-west), Damerham (2 miles north-west), Rockbourne (3 miles north-west) and Broxhill (3 miles west). Within a short drive, we also cover Totton (13 miles east), Romsey (15 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (14 miles south-east) and Ashley (14 miles south-east).
Landmarks near Ashford
In Ashford, that means homes and buildings near The Burgate School and Sixth Form and The Ship Inn and the streets around them. Well-known places in the area include Godshill Castle Hill (2.1 miles north-east) and Fordingbridge Museum (0.7 miles east). For a walk, there’s Linbrook Lake and Blashford Lakes.
What we do, step by step
On the day, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work begins. The work usually takes half a day or less for one room, longer when the kitchen is included. Somewhere as small as Ashford, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, normally around 24 hours.
Getting ready for the visit
- Tell us about any water getting in
- Clear items away from the joints we’re working on
- Mention if the joints have been sealed before
Get a quote
For a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll give you a clear price before any work starts.
Advice
What we’re called out for in Ashford
The wrong product fails fast. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
Any of these means the joints need attention:
- Cracked, shrunken or lifting silicone
- Black spots spreading through the bead
- Gaps between the worktop and the wall
- Water escaping at the shower enclosure
If you look after a building such as Fordingbridge Junior School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before booking
- How the joint is cleaned and prepared
- Whether they’re fully insured
- What the cure time is
- Who turns up on the day
What we can’t put right
We will not take on work that won’t last, so these are the limits:
- Cracks in the tray itself rather than the joint
- Cracked or missing grout between tiles (that is regrouting)
- A leaking waste, trap or valve
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly before booking.
What we seal
- Wet rooms
- Baths
- Kitchen worktops & upstands
- Shower trays & enclosures
- Basins & vanity units
- Sinks & splashbacks
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Keeping the joints in good condition
Looking after new joints is easy:
- Wipe up water along the back of the worktop
- Run the extractor fan during and after every shower
- Check the joints every few months for splits or lifting
- Keep scourers and sharp tools away from the bead
Give the silicone time to cure before it gets wet, which is usually around 24 hours. After that, a quick wipe after showering helps keep it clean.
There’s no need to wait for a full refurbishment. Sealant is a maintenance item, like the paint on a window frame, and renewing it as soon as it fails protects everything around it.