Highland · Scotland
Achintee Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing in Achintee, with a 12-month guarantee on every job. Call for a quick quote.
- Gaps where the bath or tray has moved
- Water escaping at the shower enclosure
- Shrunken sealant along the back of a worktop
About our bathroom resealing in Achintee
A bead that has gone black, split or come away shouldn’t be left until there’s a leak. A photo of the joints helps when you email us at info@mrmastic.co.uk, and you’ll get a clear quote for bathroom resealing in Achintee. We work on shower trays & enclosures, wet rooms and kitchen worktops & upstands, and the jobs we see most are lumpy, uneven sealant from a DIY attempt and cracked, shrunken or lifting silicone.
For a place like Achintee, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.
We stand behind the work with a 12-month guarantee.
- Where
- Achintee (IV54)
- Wider area
- Highland
- Cover
- One year on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What happens if it’s left?
A clean new bead makes a room look cared for, which helps when a home is being let or put on the market. Lumpy sealant with smears on the tiles has the opposite effect, and it’s harder to put right later. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why book with us
- Anti-fungal sanitary silicone in wet areas
- One-year guarantee on every job
- Fully insured
- Colour agreed with you before work begins
Take a look at our cost guide or what customers say.
Signs you need bathroom resealing in Achintee
Older sealant shrinks and hardens. Along worktops it tends to pull back from the wall, leaving a thin gap where water and food collect. Heat from the hob and strong sprays speed it along.
Common reasons people contact us include:
- Water getting behind the bath panel
- Sealant that has split, shrunk or peeled away
- Lumpy, uneven sealant from a DIY attempt
- New sealant laid over old sealant that is now lifting
Schools such as Kirkton in Meikle Strath School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- Whether all the old sealant comes out first
- Who does the work, and how experienced they are
- The length of the guarantee
- What the quote includes, VAT included or not
How the job changes by surface
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. The new bead is colour-matched where it shows, so the line doesn’t stand out.
For landlords and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will give you a quote.
Achintee questions
I let a flat near Strathcarron station. Can you help?
Yes, we work for letting agents and landlords. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before any work starts.
Is Achintee within the area you cover?
Yes. Achintee is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
How long does a bath or shower reseal take?
It takes two to three hours for a typical bath, depending on how much old sealant there is. We’ll confirm how long your job needs when we quote.
What does bathroom resealing cost?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Is it OK to put new sealant on top of the old bead?
No. Fresh silicone can’t stick to the old bead, so it peels away and hides mould and water. All the old sealant comes out first.
How long does the new silicone need before I use the shower?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.
Where are you based?
We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Bathroom resealing in Achintee: local notes
Achintee is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
For landlords with property near Strathcarron station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Achintee is in Highland. From the centre of Achintee to the outskirts, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. 253 places in Highland are on our list, large and small.
All of IV54 is covered for bathroom resealing. We also cover the places around Achintee: Srath Carran (1 mile north), Lochcarron (2 miles south-west), Balnacra (4 miles north-east), Strome Ferry (6 miles south-west) and Torridon (9 miles north). Remote and island addresses need a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
Around Achintee
There’s a railway station in Achintee itself: Strathcarron station. Open spaces near Achintee include Loch Dùghaill.
What affects the quote in Achintee
The quote reflects the job in front of us. We look at:
- The number of rooms or windows
- How easy the joints are to reach
- The size of the job
- The product the joint needs
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Helping us quote
What to tell us when you ask for a quote:
- Photos by email, if that is easy
- What the problem is, such as mould, gaps, leaks or cracking
- The address or postcode of the job
- Whether it’s a home or a business
To get a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear price before any work starts.
Towns and villages near Achintee
What else we do in Achintee
How it works
There isn’t much for you to do on the day. Point us to the joints and we’ll get on with it. The work itself takes around two hours for one bath or shower, longer for a whole bathroom. Somewhere like Achintee may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We protect the area and cut out all of the old sealant.
- We clean and degrease the joint and treat any mould.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We tidy up and give you the cure time, usually around 24 hours.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about any previous sealing or DIY attempts
- Tell us about any water getting in
Getting a quote
Need a quote? Please drop us a line at info@mrmastic.co.uk with a few details. We will explain what we’d do and give you a clear quote before any work starts.
Advice
Can I do it myself?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.