Hampshire · England

Newton Valence Window Mastic

Window mastic across Newton Valence and nearby, with old sealant always removed completely and a 12-month guarantee.

  • Mastic that’s falling out in pieces
  • White mastic on grey or black frames
  • Cracked internal joints between frame and plaster

Window mastic for Newton Valence homes and businesses

What we can’t put right

Before booking, it’s worth knowing the limits too:

  • Rotten timber, which needs a joiner first
  • Worn gaskets, brush seals or a door that has dropped
  • Condensation trapped between the panes

Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly.

What we seal

  • Aluminium frames
  • Patio & French doors
  • uPVC windows
  • Window sills
  • Timber windows & doors
  • Composite doors

About our window mastic in Newton Valence

Colour matters on a frame. White, brown, anthracite grey, black and clear sealants are all available, so the line suits the frame instead of standing out. We are often asked to deal with rushed sealant from a window installation and white mastic on grey or black frames, on patio & French doors, aluminium frames and window sills.

Somewhere as small as Newton Valence, older homes often have timber frames set in stone or brickwork. Not every older frame suits a modern silicone bead, so the sealant has to be chosen to suit the building.

We stand behind the work with a 12-month guarantee, so you’re covered after we have gone.

Place
Newton Valence (GU34)
Wider area
Hampshire
Guarantee
One year on every job
Quotes
A clear quote up front
Phone
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

What window mastic looks like in Newton Valence

Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

Letting a property close to Alton station? Then sound mastic around windows and doors keeps out the draughts and damp that tenants notice first. If you live in an older home near Church of St Mary, the joint between an old wall and a newer frame is usually the first place rain gets in.

Newton Valence is about 4 miles south of Alton, in Hampshire. Newton Valence gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Our Hampshire coverage runs to 683 places, and Newton Valence is one of them. Portsmouth is on our list too, around 20 miles away.

We cover every part of GU34 for window mastic and the streets around it. Close by, we work in Selborne (1 mile east), Empshott (2 miles east), Lower Green (3 miles south-east), Hawkley (3 miles south-east) and Oakshott (3 miles south). We also work in nearby towns such as Basingstoke (13 miles north-west), Winchester (15 miles west), Fleet (14 miles north-east), Horndean (13 miles south), Aldershot (14 miles north-east) and Alton (4 miles north).

Landmarks near Newton Valence

For rail, the closest station is Alton station, about 4.2 miles north. A little further out are Alton Community Hospital (3.4 miles north) and The Romany Museum (1.4 miles east). Not far away are Selborne Hill and Liss Riverside Railway Walk North.

Map of Newton Valence © OpenStreetMap contributors

Newton Valence: your questions answered

Do you cover smaller places like Newton Valence?

Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

Can you do window mastic in Newton Valence?

Yes. Our work covers London and the South East, and Newton Valence is part of that. Just ring 0345 464 0079 or email us with a few details of the job.

What sealant do you use?

The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.

Is it OK to seal over old sealant?

No, it won’t last. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.

Are you ARBOMaster approved?

Yes. We hold ARBOMaster approved applicator status.

Is it worth trying it myself?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Can resealing stop a draught around my window?

It will if the frame joint is the problem. We find where the air is coming from before we reseal.

Can you work on commercial sites?

Yes, regularly. We can plan bigger jobs in stages.

What the job involves on each surface

Composite doors

Composite doors are normally hung in an uPVC-type frame, and the joint around it is sealed like a window. The bead is colour-matched to the frame.

Window sills

Masonry sills can have joints where water gets in, and the joint under the frame can let rain run behind. Those are sealed with a product suited to stone or concrete.

Keeping the joints in good condition

How long the joints last depends on use and care. We suggest:

  • Paint up to the joint, not over it
  • Keep paint and stain on wooden frames in good order
  • Keep jet washers away from the mastic
  • Look round the frames every year or so

A yearly look round the frames is enough. Cracks and lifting edges are easy to spot early, and if anything looks wrong, just call 0345 464 0079 or send us an email.

Water trapped behind a failed joint can start rot in timber frames and sills. Rotten timber needs a joiner, not a sealant, so it pays to reseal before that happens.

How we quote for window mastic

The quote reflects the job in front of us. We take into account:

  • Access and height
  • The type of sealant required
  • The old material and how stubborn it is
  • Any working-time requirements on site

We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.

What to tell us for a quote

When you call or email, these details help:

  • How we’d reach the joints
  • Whether it has been sealed before
  • Whether it’s a home or a business
  • Photos by email, if that is easy

To get a quote, ring 0345 464 0079 or drop us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.

Work for landlords, hotels and businesses

Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.

Leave it or put it right?

Not every sealant suits a window. Decorators’ caulk and bathroom silicone are not designed for outside joints that move. An exterior, low-modulus sealant stays flexible in sun and frost. Older cottages and farmhouses around Newton Valence can have timber floors and frames, where water from a failed joint can cause rot if it’s left.

Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.

Why us?

  • 20+ years of sealant experience
  • ARBOMaster approved applicator
  • 180+ five-star Google reviews
  • Colour picked to suit the job

Read our cost guide and our reviews.

What happens on the day

Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a morning for a couple of windows and a door. Somewhere as small as Newton Valence, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. Each frame is looked over and we agree which ones need resealing.
  2. The old mastic is cut out and scraped back to clean surfaces.
  3. Where the gap is deep, backing rod goes in first.
  4. The new sealant goes on in white, brown, anthracite grey, black or clear to suit.
  5. Every joint is tooled smooth and checked before we leave.

How to prepare

  • Keep children and pets away from the work area
  • Tell us about any water getting in
  • Where the joints are inside, avoid wetting them before we arrive

Get a quote

We don’t publish a price list, because every job is different. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or drop us an email.

Get a price

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job