Kent · England
Window Mastic in Hunters Forstal
Window mastic across Hunters Forstal and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Hard, cracked sealant around windows
- Cracked sealant at the sill ends
- Draughty joints inside around the window
Window mastic in Hunters Forstal
If you can feel air around a shut window, the gap is often at the frame. Resealing that joint can make a room feel noticeably less draughty. If the draught is through the window seals instead, we’ll tell you. If you have whistling draughts around closed windows and untidy mastic left by window fitters, we can help, whatever the surface.
Around Hunters Forstal, many homes face open ground, so their windows and doors take the full weather. Exposed frames and sills lose their mastic sooner than sheltered ones.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.
- Location
- Hunters Forstal (CT6)
- Region
- Kent
- Cover
- One year on every job
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Window mastic in Hunters Forstal: local notes
Hunters Forstal is within about 2 miles of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on the mastic around window and door frames, especially on the side facing the sea. Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For site and facilities teams at buildings such as Herne Church of England Infant School, larger buildings have plenty of frames, and the mastic around each one ages. Homes close to Church of St Bartholomew include some older properties, and replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint. For landlords with property near Herne Bay station, renewing tired window mastic between tenants heads off draught and damp complaints.
Hunters Forstal is about 1 mile south-east of Herne Bay, in Kent. Hunters Forstal gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Our Kent coverage runs to 922 places, and Hunters Forstal is one of them. Our Chelmsford page covers work nearby, about 38 miles away.
We cover every part of the CT6 postcode area for window mastic and the streets around it. We cover properties on Mill Lane, Kingsfield Road and Hunters Forstal Road. We also cover the places around Hunters Forstal: Broomfield (1 mile east), Herne (1 mile south-west), Herne Bay (1 mile north-west), Eddington (1 mile west) and Bullockstone (1 mile south-west). Within a short drive, we also cover Canterbury (6 miles south-west), Margate (11 miles east), Ramsgate (12 miles east), Broadstairs (12 miles east), Whitstable (5 miles west) and Deal (15 miles south-east).
What’s near Hunters Forstal
Around Hunters Forstal, our work takes us to homes and buildings near Herne Bay High School, The Huntsman And Horn Public House and Curtis Wood. For rail, the closest station is Herne Bay station, about 1.1 miles north-west. Nearby you will also find Whitstable and Tankerton Hospital (4 miles west) and Tankerton Castle (4.6 miles west). The countryside around Hunters Forstal includes West Blean and Thornden Woods.
What we do, step by step
We bring everything the job needs with us. After a quick look at the joints together, the area is protected and the work begins. Most jobs take anything from an hour or two to a full day, depending on how many frames there are. In a small place like Hunters Forstal, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, we confirm safe access to each frame.
- All the failed sealant is cut away, along with any loose debris.
- Frame and wall are cleaned and must be dry before sealing, and primed where the sealant calls for it.
- Backing rod fills deep voids and the sealant goes in on top.
- The joint is shaped to shed water and the area tidied.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Keep children and pets away from the work area
- Move anything stored near the joints
Getting a quote
If you are in Hunters Forstal and need window mastic, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you will get a clear quote before work begins.
Related advice
DIY versus a professional finish
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Places near Hunters Forstal
What else we do in Hunters Forstal
Hunters Forstal questions
Does living near the coast affect window mastic in Hunters Forstal?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. The right product, a clean joint and the right depth all help it cope.
Will you come out to Hunters Forstal?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work on first-floor windows?
Yes, if safe access is possible. For high or awkward windows, we will tell you what access is needed.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Can new sealant go over the old?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. The old sealant has to come out completely.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us, and we are fully insured.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
How we quote for window mastic
We do not publish a price list, because jobs vary so much. The quote depends on:
- Mould in or behind the old joints
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
- The size of the job
The cost depends on the amount of work, how hard the old material is to remove and access to the work. We give a clear quote before any work starts, so you know where you stand.
What we need to know
When you contact us, these details help:
- Access, such as stairs, a lift or height
- If it’s domestic, commercial or a hotel
- Where the job is, and your postcode
- What’s wrong with the joints now
We quote each job on its own, so the first step is telling us about yours. Just phone 0345 464 0079 or drop us an email with the details and send pictures if you have them.
Different surfaces, different methods
Timber windows & doors
On period timber windows, traditional sand mastic is sometimes the better choice. We’ll tell you which suits your home.
Aluminium frames
Large aluminium doors have long joints down each side and across the head, and the bottom joint sees the most water. We prepare and reseal every joint, backing the deep ones.
When something else is needed
We will always be straight with you, so here’s what sealant cannot fix:
- A frame that has rotted at the joint
- Penetrating damp from a failed cavity tray or render
- Worn gaskets, brush seals or a door that has dropped
If in doubt, ring 0345 464 0079 or email us and we will say what we think.
Surfaces we seal
- Composite doors
- Patio & French doors
- Timber windows & doors
- Window sills
- Aluminium frames
- uPVC windows
What happens if it’s left?
Draughts and leaks don’t always mean new windows. Where the frames are sound, new mastic generally deals with draughts and leaks at the edges. If we find failed glass units or worn seals, we will tell you. Where a wall is exposed, as many are in small places like Hunters Forstal, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, phone 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
Why us?
- Arbo and Everbuild products
- A choice of colours where the product allows
- Experience in homes, commercial sites and hotels
- Every job guaranteed for a year
Read how sealant jobs are priced or our reviews.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Avoid blasting the frames with a pressure washer
- Keep drainage slots and sill grooves clear
- Keep paint off silicone joints
- Keep timber frames painted
Silicone cannot generally be painted, so mention any painting plans before any work starts. There are paintable sealants for joints that need it.
Draughts get worse, not better. As old mastic keeps shrinking, the gap widens, and heat escapes around the frame. Resealing closes it.