Kent · England

Window & door mastic in Beltinge, Kent

Mastic around window and door frames, sills and patio doors for homes and businesses in Beltinge and across Kent. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.

  • A bead that does not match the frame
  • Mastic that has split away from the wall
  • Mastic that’s falling out in pieces

Trusted window mastic in Beltinge

Honest limits

We will not take on work that won’t last, so here’s what sealant cannot put right:

  • Damp problems in the wall away from the window
  • Condensation trapped between the panes
  • Soft or decayed wood in the frame

Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly before booking.

Where we work in Beltinge

  • Window sills
  • uPVC windows
  • Timber windows & doors
  • Patio & French doors
  • Composite doors
  • Aluminium frames

About our window mastic in Beltinge

Around Beltinge we seal all kinds of frames: uPVC, aluminium, timber and composite, along with patio doors, French doors and sills. Each gets a sealant chosen for the frame and the wall it meets. Typical jobs include gaps where the sill meets the wall and damp patches on the reveal after heavy rain, across uPVC windows, window sills and patio & French doors.

Houses in smaller places like Beltinge can stand more in the open than those in a built-up town. That is hard on the mastic around frames and sills.

You are covered for a year from the day we finish. If anything isn’t right with it, phone 0345 464 0079 or email us.

Location
Beltinge (CT6)
Wider area
Kent
Cover
One year on every job
Price
A clear price before we start
Telephone
0345 464 0079
Updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

Work for landlords, hotels and businesses

Housing providers, facilities teams and property managers book us too in Beltinge and across Kent. We can quote a run of properties together, and we’re fully insured for the work.

Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.

Common questions in Beltinge

Can you help a landlord with a rental near Herne Bay station?

Yes. We work for landlords and agents as well as homeowners. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.

Will you come out to Beltinge?

Yes. Beltinge is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Is it messy?

No. We protect the surfaces around the joints, and we tidy up before we go.

What do you need from me for a quote?

A short description and the location, with pictures by email if possible. If we need more, we’ll ask.

Do you take out the old sealant first?

Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.

Can you quote for more than one area?

Yes. Several rooms, windows or areas can go on one quote.

Do I need to be at home?

It depends on the job. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.

How much does window mastic cost in Beltinge?

Every job is different, so each one gets its own quote. To get one, phone 0345 464 0079 or email us with a short description of the job.

Different surfaces, different methods

Window sills

Every drop off the glass ends up on the sill, so the joints at each end and underneath matter. Each is cleaned out and resealed.

Composite doors

Composite doors are normally hung in an uPVC-type frame, so its perimeter joint is sealed much like a window. We match the colour to the frame.

Can I do it myself?

The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.

If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

Beltinge homes and the weather

Beltinge is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on the mastic around window and door frames, especially on the side facing the sea. Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

If you let a flat or house near Herne Bay station, cracked frame mastic tends to show up as a draught or damp complaint, so it’s worth checking between lets. In the older streets around Church of St Bartholomew, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.

Beltinge is about 1 mile east of Herne Bay, in Kent. Anywhere in CT6, we can carry out window mastic at your property. We cover 922 towns and villages across Kent, from the larger towns to small villages. You can also see our page for Chelmsford, roughly 38 miles from Beltinge.

Work in CT6 is quoted and booked the same way as anywhere else. If you need window mastic at a property on Manor Road, Puffin Road and Cliff Avenue or anywhere close by, we can help. If you’re just outside Beltinge, we cover Bishopstone (1 mile east), Hillborough (1 mile south-east), Hawthorn (1 mile south-east), Broomfield (1 mile south) and Herne Bay (1 mile west). Larger places within reach include Canterbury (7 miles south-west), Margate (10 miles east), Ramsgate (11 miles east), Broadstairs (12 miles east), Whitstable (6 miles west) and Deal (15 miles south-east).

Local landmarks in Beltinge

We work in homes and buildings around Herne Bay High School and Bishopstone Cliffs. The nearest railway station is Herne Bay station, about 1.9 miles west. A little further out are Whitstable and Tankerton Hospital (4.8 miles west). Open spaces near Beltinge include West Blean and Thornden Woods.

Map of Beltinge © OpenStreetMap contributors

Why deal with it now?

Getting a straight, even bead on an outside frame takes practice, especially on upper floors. A professional job is cut out properly, backed where needed and finished neatly, using a product chosen for the frame and wall. Homes in smaller places like Beltinge can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please call 0345 464 0079 or email us.

Why Beltinge customers choose us

  • Sealant colour chosen to suit
  • Domestic, commercial and hotel work
  • Fully insured
  • Approved under the ARBOMaster scheme

See how sealant jobs are priced or what customers say.

When to call us in Beltinge

Mastic ages in the weather. Sunlight dries the surface out, until it loses its stretch and starts to crack.

If you can see any of these, it’s time to have the joints looked at:

  • Cold air getting in at the frame edge
  • Cracked internal joints between frame and plaster
  • Cracked or shrunken mastic around the frame
  • Water coming in at the bottom corners of a door

If you look after a building such as Reculver Church of England Primary School, its window and door frames need their mastic kept sound, just like a home’s.

Before you book anyone

  • How hidden problems are handled
  • When the joint can take water or movement
  • Which sealant they’ll use, and why
  • The length of the guarantee

How to choose a mastic man

What happens on the day

Once we’re on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a handful of frames, longer for a whole house. A visit to Beltinge is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. Each frame is looked over and we agree which ones need resealing.
  2. We remove the old mastic and clean the frame edge and wall.
  3. Deep gaps get closed-cell backing rod to set the depth.
  4. The new sealant goes on in white, brown, anthracite grey, black or clear to suit.
  5. We tool each bead neatly and check every joint is closed.

Preparing for the visit

  • Let us know if you’ve seen damp or leaks
  • Where the joints are inside, avoid wetting them before we arrive
  • Tell us if parking is tricky

Get a quote

Want a quote for window mastic? Please phone 0345 464 0079 or send us an email with a few details. We’ll explain what we’d do and give you a clear quote before any work starts.

Ask for a quote

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job