East Sussex · England

Window Mastic in Burwash

Window and door frames in Burwash need attention? We cut out the old, prepare the joints and apply the right sealant.

  • Whistling draughts around closed windows
  • Old mastic that has gone black or come away
  • Cracked sealant at the sill ends

Need window mastic in Burwash?

Burwash homes and the weather

With historic houses such as Bateman's (about 0.8 miles south-west) nearby, there’s older building stock in the area around Burwash as well as newer homes. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

If you let a flat or house near Stonegate station, sound mastic around windows and doors keeps out the draughts and damp that tenants notice first. Managing a site like Burwash CofE School? Then the mastic around its windows and doors needs looking after like any other building’s.

Burwash is about 10 miles east of Crowborough, in East Sussex. Jobs in Burwash get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Burwash is one of 289 towns and villages in East Sussex we cover for window mastic. Our Brighton page covers work nearby (25 miles or so).

Jobs for window mastic in TN19 works the same way as everywhere else we cover. Window mastic is available to properties on High Street, Rother View and Hoppers Croft Lane. Close by, we work in Burwash Weald (2 miles south-west), Burwash Common (2 miles south-west), Wood's Corner (4 miles south), Dallington (4 miles south) and Punnett's Town (4 miles south-west). We also work in nearby towns such as Eastbourne (15 miles south), Hastings (12 miles south-east), Bexhill-on-Sea (11 miles south), Hailsham (11 miles south-west), Crowborough (10 miles west) and St Leonards (12 miles south-east).

Around Burwash

We work in homes and buildings around The Admiral Vernon Public House and the streets around them. Burwash’s nearest station is Stonegate station, roughly 1.8 miles north-west of the centre. A little further out are Ticehurst House Hospital (3.5 miles north) and Old Castle (3.9 miles south-west). Not far away are Bewl Water.

Map of Burwash © OpenStreetMap contributors

How we handle window mastic in Burwash

From a single sill to a whole house of windows, you’ll get a clear quote before work begins. Just call 0345 464 0079 or send us an email and tell us how many frames there are and how they’re reached. If you are dealing with sealant in the wrong colour for the frame and cracked internal joints between frame and plaster, we can help.

Outdoor sealant needs dry, clean surfaces, so work on frames around Burwash is planned for dry weather. Tell us about access to every side of the house, including upper-floor windows.

The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.

Applicator reaching up to seal an external door frame on a sunny day
Where
Burwash (TN19)
Wider area
East Sussex
Guarantee
A year, on every job
Quote
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026

Honest limits

A few problems are outside what sealant work can do:

  • Damp coming through the wall itself rather than the frame joint
  • A door that needs adjusting, rehanging or new seals
  • Soft or decayed wood in the frame

If in doubt, call 0345 464 0079 or email us and we will say what we think before booking.

Where we work in Burwash

  • Patio & French doors
  • Window sills
  • Aluminium frames
  • Composite doors
  • Timber windows & doors
  • uPVC windows

Why act early in Burwash

Getting a straight, even bead on an outside frame takes practice, especially upstairs. We cut out properly, back deep gaps and tool every joint neatly, using a product chosen for the frame and wall. Around Burwash, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or drop us an email and we will talk you through it.

Why Burwash clients choose us

  • Neat joints and a tidy finish
  • Anti-fungal silicone where joints get wet
  • Trusted Arbo and Everbuild sealants
  • Domestic, commercial and hotel work

See what affects the cost and our reviews.

Landlords, agents and businesses in Burwash

Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.

Questions from Burwash

Can you help a landlord with a rental near Stonegate station?

Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or send us an email with the details for a clear quote.

Is Burwash in your area for window mastic?

Yes, Burwash is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job.

Can you do the inside joint as well?

Yes. Outside is the weather seal; inside closes the gap to the plaster. We do one or both.

What do you put in the joint?

Products from Arbo and Everbuild, among others, picked for each joint. We’ll tell you what we are using and why.

What information do you need?

Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply call 0345 464 0079 or drop us an email.

Where are you based?

Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.

Will the old sealant be removed?

Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.

Can new sealant go over the old?

No, and we never do. It may look fine at first, but the new bead soon lifts. The old sealant has to come out completely.

What we do, step by step

Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it generally takes most of a day for a typical house, less for a few frames. Somewhere as small as Burwash, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. First, we confirm safe access to each frame.
  2. Old, cracked mastic is removed completely.
  3. Frame and wall are cleaned and must be dry before sealing.
  4. Backing rod fills deep voids and the sealant goes in on top.
  5. The joint is shaped to shed water and the area tidied.

Preparing for the visit

  • Mention any tricky access
  • Mention any sign-in or site rules at work premises
  • Keep pets and children clear of the area while we work

Getting a quote

To get a quote, call 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.

Ask for a quote

Related advice

When to call us in Burwash

Mastic ages in the weather. UV light hardens the outside of the bead, until it loses its stretch and starts to crack.

The most common problems we see are:

  • Draughty joints inside around the window
  • Draughts coming in around windows and doors
  • Mastic that’s falling out in pieces
  • Gaps left after new windows were fitted

In the older streets around The Parish Church of St Bartholomew, the joint between an old wall and a newer frame is usually the first place rain gets in.

Before booking anyone

  • Is the old sealant removed completely?
  • Who turns up on the day
  • How long to leave it before use
  • What insurance they hold

10 questions to ask before booking

Looking after it afterwards

Simple care keeps the joints in good condition. We recommend:

  • Keep solvents and bleach off the sealant
  • Wash the frames with mild soapy water
  • Paint up to the joint, not over it
  • Keep timber frames painted

Silicone can’t generally be painted, so mention any painting plans before any work starts. There are paintable sealants for joints that need it.

Wet, windy weather is when failed mastic shows itself, but resealing works best in dry conditions. Dealing with it when you first notice a crack avoids chasing leaks through the wet months.

What affects the cost of window mastic

The price is agreed before any work begins. It’s based on:

  • When we can work, for business premises
  • The product the joint needs
  • The amount of work
  • The number of rooms or windows

Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

What to tell us for a quote

What to tell us when you ask for a quote:

  • Pictures of the joints, sent by email
  • The address or postcode of the job
  • The rough size of the job
  • If someone has resealed it before

For window mastic in Burwash, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job