Aberdeenshire · Scotland

Window & door mastic in Broadsea, Aberdeenshire

We cover Broadsea for mastic around window and door frames, sills and patio doors. Old material cut out, joints cleaned and sealed neatly.

  • Cold air getting in at the frame edge
  • Untidy mastic left by window fitters
  • Cracked sealant at the sill ends

Window mastic in Broadsea

Honest limits

We’ll always be straight with you, so here’s what new sealant will not do:

  • Damp coming through the wall itself rather than the frame joint
  • Draughts through the window seals rather than the frame
  • Broken hinges, locks or handles

If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer before booking.

What we seal

  • Timber windows & doors
  • uPVC windows
  • Window sills
  • Composite doors
  • Aluminium frames
  • Patio & French doors

Window mastic in Broadsea

If you can feel air around a shut window, the gap is often at the frame. Resealing that joint can make a room feel noticeably less draughty and quietens the whistle on windy days. Where the air is getting in through the window itself, we will say so. We work on composite doors, window sills and uPVC windows, and the jobs we see most are white mastic on grey or black frames and mastic that has split away from the wall.

Across smaller places in Scotland, homes range from stone and harled cottages to newer houses, many standing in the open. Exposed frames and sills take the full force of wind-driven rain, so the mastic there works hard.

We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Place
Broadsea (AB43)
Region
Aberdeenshire
Guarantee
One year on every job
Price
A clear quote up front
Email
info@mrmastic.co.uk
Page updated
26 October 2026

What affects the quote in Broadsea

There’s no set price list, because no two jobs are the same. The quote depends on:

  • When we can work, for business premises
  • How much old sealant there is and how hard it is to remove
  • Mould in or behind the old joints
  • The number and length of the joints

No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.

Asking for a quote

To make quoting easier, please include:

  • Whether it has been sealed before
  • A few pictures by email, if you can
  • If it’s domestic, commercial or a hotel
  • Where the job is, and your postcode

Asking for a quote is easy: let us know the job and the location. A few pictures by email make the job easier to understand, and we will take it from there.

How the visit works

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for a few frames, or a day or more for a whole house. Around Broadsea, distance and access matter more than parking. Let us know how to find you and how to reach the joints.

  1. We start by checking each window and door with you.
  2. Next the failed sealant is cut away and the joint cleaned.
  3. Where gaps are deep, backing rod goes in first.
  4. A flexible, weatherproof sealant is applied in a colour to suit the frame.
  5. Every joint is checked before we leave.

How to prepare

  • Mention any parking rules near the property
  • Tell us about any previous sealing or DIY attempts
  • Tell us about any water getting in

Get a quote

Need a quote? Please send an email to info@mrmastic.co.uk with a few details. We’ll explain what we’d do and send you a clear quote before any work starts.

Get a quick quote

Advice

Why act early in Broadsea

Not every sealant suits a window. Interior caulk and bathroom silicone aren’t made for exterior frame joints. An exterior, low-modulus sealant stays flexible in sun and frost. Around Broadsea, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.

We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.

Why Broadsea clients choose us

  • Homes, businesses and hotels
  • Fully insured
  • A 12-month guarantee on all work
  • Over 20 years’ experience

Read what affects the cost and our reviews.

Frames and glazing around Broadsea

Broadsea is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on the mastic around window and door frames, especially on the side facing the sea. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that.

Managing a site like Fraserburgh Academy? Then the mastic around its windows and doors needs looking after like any other building’s.

Broadsea is about 1 mile north of Fraserburgh, in Aberdeenshire. If you need window mastic in Broadsea, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We are based in Crawley and cover Aberdeenshire. Broadsea is one of 161 towns and villages in Aberdeenshire we cover. Aberdeen is on our list too, around 38 miles away.

Our applicators cover all of AB43 for window mastic. We cover properties on Albert Lane, Main Street and Marconi Road. Main roads around Broadsea include the A98. Nearby, we also carry out window mastic in Fraserburgh (1 mile south), Sandhaven (2 miles west), Pittulie (2 miles west), Memsie (3 miles south) and Inverallochy (3 miles south-east). We also work in nearby towns such as Peterhead (15 miles south-east), Mintlaw (12 miles south), Longside (13 miles south), Strichen (8 miles south), Buchanhaven (15 miles south-east) and Gardenstown (12 miles west).

Near you in Broadsea

Locally, jobs take us to homes and businesses close to The Saltoun Inn and the streets around them. Well-known places in the area include Kinnaird Head Castle (0.7 miles east) and Fraserburgh Hospital (0.5 miles south).

Map of Broadsea © OpenStreetMap contributors

Common problems we fix in Broadsea

Timber windows bring their own problems. Mastic painted over many times cracks with the paint, and timber moves with moisture as well as temperature.

Common reasons people contact us are:

  • Draughts coming in around windows and doors
  • Draughty joints inside around the window
  • Gaps left after new windows were fitted
  • White mastic on grey or black frames

If you live in an older home near St Peter's Episcopal Church, frames set in older brick or stone need a sealant that suits the wall as well as the frame.

What to look for in a quote

  • How much experience the applicator has
  • Whether VAT is included
  • What preparation is included
  • What happens if they find a problem under the old sealant

10 questions to ask before you book

For landlords and businesses

From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.

Different surfaces, different methods

uPVC windows

The frame is cleaned with a product that will not harm the plastic, then the new bead is laid against the frame and the wall and tooled smooth.

Composite doors

If the door itself is draughty, the issue may be the door seals or hinges rather than the frame mastic. We’ll tell you if that’s what we find.

Common questions in Broadsea

Is Broadsea in your area for window mastic?

Yes, Broadsea is within the area we cover. We work across all of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.

Does living near the coast affect window mastic in Broadsea?

Near the sea, outside joints face more wind, rain and salt than they would inland, so preparation and the right sealant matter all the more. Walls facing the sea are normally the first to need attention.

Can you do several jobs on one visit?

Of course. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.

Will you leave a mess?

Tidy work is part of the job. We protect what’s around the joints, and we clear up when we’re done.

Can you do the inside joint as well?

Yes. Plenty of draughts come through the inside joint as well as the outside, so it can be worth sealing both.

Do you do commercial work?

Yes. Commercial and hotel work is a large part of what we do. Working times can be discussed when we quote.

Are you insured?

Yes. Full insurance covers our work.

Will new mastic stop draughts?

Yes, where the draught is at the frame edge. We check where the draught is before we start.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job