Aberdeenshire · Scotland
Fire Rated Sealant in Broadsea
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Broadsea. Fully insured, ARBOMaster approved and guaranteed for a year.
- Linear gaps at the head of walls
- Standard silicone or caulk in a fire-stopping gap
- Cracked or shrunken fire-rated sealant
Your questions about fire rated sealant in Broadsea
Is Broadsea within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
How do I get a quote for fire rated sealant in Broadsea?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before we start.
Can tenants book the work?
Yes. Check with your landlord; we can send the quote to them too.
Is there any odour?
That depends on the sealant. Some smell for a while, some hardly at all.
What do you need from me for a quote?
Only a few details: where it is, what you’ve noticed and how we reach it. Then drop us a line at info@mrmastic.co.uk.
Do you have insurance?
Yes. We are fully insured for every job we do.
How long does fire rated sealant take?
As a guide, most jobs take a few hours for a handful of gaps, and longer for a whole building. Larger jobs naturally take longer, and we’ll tell you how long to expect.
Fire rated sealant in Broadsea
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. If you are dealing with standard silicone or caulk in a fire-stopping gap and old fire sealant that has split or come away, we can help, whatever the surface.
If you look after holiday lets, a guest house or a community building in or near Broadsea, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Your job is guaranteed for a year, as with all our work.
- Where
- Broadsea (AB43)
- Region
- Aberdeenshire
- Cover
- One year on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What we’re called out for in Broadsea
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
If you can see any of these, it’s time to have the joints looked at:
- Damaged fire sealant left by other trades
- Open joints along the top of partitions
- Ordinary sealant used where a fire-rated product was needed
- Gaps around pipes and cables through fire-resisting walls
Managing a site like Fraserburgh Academy? Then service openings in fire-resisting walls need checking after any refurbishment.
What your quote should include
- What the quote includes, VAT included or not
- Whether they’re fully insured
- Whether all the old sealant comes out first
- How much experience the applicator has
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
How the visit works
There is not much for you to do on the day. Show us the job and we’ll take it from there. The job generally takes a few hours for a handful of gaps, and longer for a whole building, including the tidy-up. Outside jobs in Broadsea need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
How to prepare
- Mention if the joints have been sealed before
- Where the joints are inside, avoid wetting them before we arrive
- Let us know if you’ve seen damp or leaks
How to get a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and give you a clear price.
Advice
Keeping the joints in good condition
Looking after new joints is easy:
- Check risers, ceiling voids and cupboards during building checks
- Report cracked or damaged seals as soon as you notice them
- Store the list of sealed gaps with your building paperwork
- Photograph sealed gaps before they’re covered up
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and have them put right.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is generally a straightforward job.
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Workplaces and buildings in Broadsea
For seaside hotels, guest houses and holiday lets around Broadsea, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments.
If you look after a church, hall or community building such as St Peter's Episcopal Church, older buildings that have had new heating or wiring often have service gaps worth checking.
Broadsea is about 1 mile north of Fraserburgh, in Aberdeenshire. From the centre of Broadsea to the outskirts, fire rated sealant is available for homes and businesses alike. Across Aberdeenshire, we cover 161 places, Broadsea among them. Aberdeen is on our list too, about 38 miles from Broadsea.
Jobs for fire rated sealant in AB43 is quoted and booked the same way as anywhere else. If you need fire rated sealant at a property on Albert Lane, Main Street and Marconi Road or anywhere close by, our applicators can take on the job. You will find Broadsea on the A98, which makes it straightforward to reach with everything needed for fire rated sealant. We also cover the places around Broadsea: Fraserburgh (1 mile south), Sandhaven (2 miles west), Pittulie (2 miles west), Memsie (3 miles south) and Inverallochy (3 miles south-east). We also work in nearby towns such as Peterhead (15 miles south-east), Mintlaw (12 miles south), Longside (13 miles south), Strichen (8 miles south), Buchanhaven (15 miles south-east) and Gardenstown (12 miles west).
Local landmarks in Broadsea
Typical jobs here are in homes near The Saltoun Inn, among other places. Other landmarks nearby include Kinnaird Head Castle (0.7 miles east) and Fraserburgh Hospital (0.5 miles south).
Surface by surface
Flats and HMOs
Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product.
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We seal them along their full length.
What happens if it’s left?
A quick fill with any sealant to hand isn’t fire stopping. Fire-rated products are tested in set gap sizes, depths and substrates, so both the product and the method matter. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, email us at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Why choose Mr Mastic in Broadsea
- Old sealant always removed completely
- Trusted Arbo and Everbuild sealants
- Full insurance on every job
- Anti-fungal sanitary silicone in wet areas
Read what affects the cost and our reviews.