Highland · Scotland
Window & door mastic in Aultbea, Highland
Problem with your window and door frames in Aultbea? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Mastic that’s falling out in pieces
- White mastic on grey or black frames
- Gaps left after new windows were fitted
About our window mastic in Aultbea
If you can feel air around a shut window, the gap is often at the frame. Resealing that joint can make a room feel noticeably less draughty and quietens the whistle on windy days. If the draught is through the window seals instead, we’ll tell you. If you have rushed sealant from a window installation and white mastic on grey or black frames, we can put it right.
Many older Scottish homes still have timber windows set into stone walls. The sealant has to suit the stone, which rules out acetoxy silicones that can mark or attack it.
There’s a 12-month guarantee on every job, large or small.
- Place
- Aultbea (IV22)
- Wider area
- Highland
- Guarantee
- A year, on every job
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What we do, step by step
We bring everything the job needs with us, so you do not need to buy or prepare anything. After a quick look at the joints together, the area is protected and the work begins. Most jobs take most of a day for a typical house, less for a few frames. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- First, we go round the frames with you and agree the list.
- The old mastic is cut out and scraped back to clean surfaces.
- Where the gap is deep, backing rod goes in first.
- A flexible exterior sealant is applied in a colour to suit the frame.
- We tool each bead neatly and check every joint is closed.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- Mention any parking rules near the property
- Mention any tricky access
Getting a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved before giving you a price.
Related advice
Aultbea questions
Is Aultbea within the area you cover?
Yes. Aultbea is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Can you do window mastic in Aultbea?
Yes, Aultbea is within the area we cover. We work across all of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear price.
Can you seal over the old sealant?
No. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
What information do you need?
A short description and the location, plus pictures if you have them. If we need more, we will ask.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Will resealing my frames help with draughts?
If the draught is coming in around the frame, yes. If it’s through the window’s own seals or a hinge, that’s a different fix, and we’ll say so.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Is the new sealant paintable?
Silicone generally won’t take paint. Let us know beforehand, and we’ll use a paintable product where it suits.
Signs you need window mastic in Aultbea
Joint shape matters as much as the product. A skim of sealant over a wide gap soon tears, while a joint packed solid can’t stretch. Backing rod sets the right depth.
If you can see any of these, it’s time to have the joints looked at:
- Untidy mastic left by window fitters
- Rain getting in at the frame or under the sill
- Cracked internal joints between frame and plaster
- Leaking joints at the ends of sills
In and around Aultbea, as anywhere, good window mastic starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- Whether the sealant suits the joint
- Whether you can choose the colour
- What happens if they find a problem under the old sealant
- Whether they’re fully insured
What else we do in Aultbea
What affects the quote in Aultbea
The price is agreed before any work begins. It’s based on:
- Any working-time requirements on site
- The old material and how stubborn it is
- The type of sealant required
- The number of rooms or windows
Combining jobs into one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- The address or postcode of the job
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
- The type of property
For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Why act early in Aultbea
Resealing frames is a short job: it takes anything from an hour or two to a full day, depending on how many frames there are. Leave it until water is coming in and you may need plastering and decorating as well. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why book with us
- Neat joints and a tidy finish
- Arbo and Everbuild products
- Sanitary silicone with an anti-fungal additive in wet areas
- A 12-month guarantee on all work
Take a look at how sealant jobs are priced or customer reviews.
Different surfaces, different methods
Timber windows & doors
Soft or rotten wood cannot be sealed successfully. We’ll point out any rot we find, as a joiner will need to deal with it.
Composite doors
An exposed front door gets wind-driven rain, and the top and bottom corners tend to fail first. Those corners get the most care.
Windows and doors in Aultbea
Aultbea is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on the mastic around window and door frames, which can dry out and crack sooner where a building faces the weather. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and sound outside sealant is part of that.
Homes close to Aultbea Church include some older properties, and replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Aultbea is in Highland. Anywhere in IV22, we can carry out window mastic at your property. Aultbea is one of 253 places in Highland where we work.
Jobs for window mastic in IV22 is quoted and booked the same way as anywhere else. We also cover the places around Aultbea: Àird (1 mile west), Laide (2 miles north-east), Inverasdale (4 miles south-west), Poolewe (5 miles south) and Gairloch (9 miles south-west). If you’re somewhere remote, a little more planning is needed.
Local landmarks in Aultbea
A little further out are Arctic Convoy Museum (within half a mile north-west). The countryside around Aultbea includes Loch a' Bhaid-luachraich.
For landlords and businesses
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Use gentle cleaners on frames and sealant
- Keep paint and stain on wooden frames in good order
- Keep jet washers away from the mastic
- Look round the frames every year or so
Clean the frames with mild soapy water, and keep solvents and harsh chemicals off the joint.
Water gets in quietly when mastic fails. Often the first sign is a damp patch inside or flaking paint on the reveal. Catching it early keeps the fix to a reseal.