Aberdeenshire · Scotland
Tarland Sand Mastic
We cover Tarland for traditional burnt sand mastic around sash and case windows and doors in stone and brick. Old material cut out, joints cleaned and sealed neatly.
- Modern sealant on a period surround
- Mastic that needs renewing before redecorating
- Cement or filler used on old window joints that has cracked
Do you need sand mastic in Tarland?
Paint, silicone or cement used over old mastic causes problems. They do not move with the timber, and they usually need raking out.
These are the problems we’re asked about most:
- Wind and rain getting in round a sash window
- Patchy fillers round a sash window
- Window mastic to renew ahead of painting
- Mastic dropping out of the joint
If you live in an older home near Tarland Old Parish Church, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Comparing quotes
- Which colour the sealant will be
- What product goes in the joint
- How the surfaces are prepared before sealing
- How hidden problems are handled
Sand mastic in Tarland, done properly
Traditional burnt sand mastic blends with stone and brick surrounds. It suits period and listed homes where a modern sealant bead would stand out. If you have open joints round the window box and tired mastic found when preparing windows for paint, we can help, whatever the surface.
Outdoor sealant needs a dry surface, so window work around Tarland is planned around the weather. Tell us about access to all the windows and doors, upstairs included.
Whatever the size of the job, you get the same one-year guarantee in Tarland and across Aberdeenshire.
- Place
- Tarland (AB34)
- Wider area
- Aberdeenshire
- Cover
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Why deal with it now?
Cement-based fillers and modern sealants do not always suit a period surround. Sand mastic matches what was there and that can be important for listed homes. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- An ARBOMaster approved applicator
- Over 20 years’ experience
- Rated 4.9 stars on Google
- Tidy, careful work
Take a look at our cost guide and what customers say.
What happens on the day
Before we leave, we go over the finished joints with you. The work normally takes anything from a few hours to a full day, depending on how many windows, depending on the size of the job. Around Tarland, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- First, we look at the surrounds with you and agree what needs doing.
- We rake out the old mastic and clean the joint.
- We pack any deep gaps so the mastic sits at the right depth.
- The mastic is mixed, pressed into the joint by hand and shaped.
- The finish is dressed so it sits neatly against the stone or brick.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Plan for the work area to be out of bounds to pets and children
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we will explain what’s involved before giving you a price.
Read more
Surface by surface
Period and listed homes
Materials matter on listed and conservation-area homes. Sand mastic is often the preferred finish.
Tenement and terrace windows
Upper-floor windows need access planning. Tell us the height and we’ll confirm what’s needed.
When something else is needed
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Whether work needs listed building consent
- Putty and glazing repairs
- Rotten sashes, sills or window boxes (a joiner’s job)
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer before booking.
Surfaces we seal
- Period & listed homes
- Timber door frames
- Tenement windows
- Brick reveals
- Stone surrounds
- Sash and case windows
Keeping the joints in good condition
After the cure time, these simple habits help:
- Don’t paint over the new mastic
- Find out about consent before window work on a listed home
- Avoid patching sand mastic with silicone
- Keep sills and gutters clear so water drains away
Avoid sealing over the mastic with silicone. If you see a crack, ask us to take a look before trying a quick fix.
Crumbling mastic lets rain into the joint. That water can reach the timber frame and the wall, so renewing it early is worth it.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Tarland questions
Is Tarland within the area you cover?
Yes. Tarland is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you cover Tarland for sand mastic?
Yes. We work across all of Scotland, and Tarland is part of that. Just email us at info@mrmastic.co.uk with a few details of the job.
Do I have to be there?
We need access to the joints, so we’ll agree that with you when we book. Indoors, that normally means someone at home.
How long does sand mastic take to go off?
A skin forms quite soon, but full hardening takes longer. We’ll tell you what to expect for your job.
Where is Mr Mastic based?
We are a Crawley-based firm. Our area covers South East England, London and Scotland.
Is consent needed for window work on a listed home?
Yes, it’s worth checking. Your local planning authority can say if consent is needed for listed or conservation-area properties.
Do you work for landlords and businesses?
Yes, we do. Domestic, commercial and hotel work are all part of what we do, and we are fully insured.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
What else we do in Tarland
Tarland homes and the weather
Many older homes in Scotland have sash and case windows, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.
In and around Tarland, as anywhere, good sand mastic starts with a clean, dry, properly prepared joint.
Tarland is about 21 miles south-west of Inverurie, in Aberdeenshire. Tarland gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Tarland is one of 161 places in Aberdeenshire where we work for sand mastic. There’s also a page for Aberdeen, about 28 miles away.
Here we cover the AB34 postcode area for sand mastic. Local streets include Market Stance, The Square and Melgum Road. We also cover the places around Tarland: Dinnet (4 miles south), Aboyne (4 miles south-east), Birsemore (5 miles south-east), Towie (6 miles north-west) and Lumphanan (6 miles east). Further out, we also cover Banchory (15 miles east), Alford (9 miles north-east), Ballater (9 miles south-west) and Torphins (9 miles east).
Near you in Tarland
Nearby you will also find Aboyne Hospital (5 miles south-east) and Coull Castle (2.4 miles south-east). Green spaces nearby include Craiglich and Loch Davan.