Kent · England
Remedial sealant & repairs in Westwood, Kent
Removing failed, mouldy or leaking sealant and putting it right for homeowners, landlords and businesses in Westwood. Fully insured, ARBOMaster approved and guaranteed for a year.
- Products that weren’t meant for the joint
- Worktop sealant that has shrunk and split
- A second bead peeling off the first
Quotes for remedial sealant in Westwood
The quote reflects the job in front of us. We take into account:
- Any mould that needs treating
- The product the joint needs
- When we can work, for business premises
- How many rooms, windows or areas are involved
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will go through it with you.
What we need to know
To help us quote quickly, let us know:
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
- How we’d reach the joints
- Any previous sealing or DIY work
For a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.
Remedial sealant for homes and businesses in Westwood
If a joint has been resealed and is leaking again, it’s worth a proper look. It helps to have pictures when you ring 0345 464 0079 or drop us an email, along with when it was last resealed. Common call-outs are for products that weren’t meant for the joint and movement joints that have split or pulled away, across mouldy bath & shower sealant, leaking tray & enclosure joints and expansion joints.
Being in a small place like Westwood makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
All our work is covered by a one-year guarantee.
- Place
- Westwood (CT4)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Signs you need remedial sealant in Westwood
Products get mixed up: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.
If you can see any of these, it’s time to have the joints looked at:
- Gaps opening along the back of the worktop
- Leaks that keep coming back after resealing
- Movement joints that have split or pulled away
- Wide, uneven beads that look worse than the old ones
Rented homes near Bekesbourne station change hands often, and a joint that keeps failing is best fixed properly while the property is empty.
Questions to ask before you book
- What happens if they find a problem under the old sealant
- How the colour is chosen
- Are they insured?
- The length of the guarantee
Nearby places to Westwood
Other services in Westwood
What the job involves on each surface
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, tray edges and screen profiles included.
Over-sealed & botched joints
Thick, smeared sealant looks messy and hides problems. Taking it back shows what’s underneath, and then we reseal it neatly.
Remedial sealant in Westwood: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St Peter and St Paul, walls and floors in older homes can move, and sealant and grout show it first.
Westwood is about 5 miles south of Canterbury, in Kent. For remedial sealant in and around Westwood, please call 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Kent. Westwood is one of 922 towns and villages in Kent we cover for remedial sealant. There’s also a page for Chelmsford, roughly 45 miles from Westwood.
All of CT4 is covered for remedial sealant. Neighbouring places we cover for remedial sealant include Marley (1 mile east), Heart's Delight (2 miles east), Bishopsbourne (2 miles north-east), Kingston (2 miles north-east) and Derringstone (2 miles east). Further out, we also cover Ashford (11 miles south-west), Canterbury (5 miles north), Dover (10 miles south-east), Folkestone (9 miles south), Whitstable (11 miles north) and Deal (13 miles east).
Around Westwood
We work in homes and buildings around Jumping Downs. The closest station to Westwood is Bekesbourne station, about 4.1 miles north. Well-known places in the area include Canterbury Castle (5 miles north) and Kent and Canterbury Hospital (4.2 miles north).
Why act early in Westwood
Stripping out botched sealant adds time to a reseal, but rarely a lot: it takes a few hours for most joints, depending on how much old sealant has to come out. Compared with chasing the same leak every few months, it’s time well spent. Older cottages and farmhouses around Westwood can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.
What you get with us
- White, clear, grey or coloured to suit, where the product allows
- 20+ years of sealant experience
- Anti-fungal silicone where joints get wet
- You choose the colour before work begins
Take a look at what affects the cost or our reviews.
Honest limits
Before booking, it’s worth knowing the limits:
- Water damage behind tiles that needs a tiler
- Movement from fittings that are not supported
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If you are not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before you book.
Where we work in Westwood
- Expansion joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Failed movement joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
FAQs for Westwood
I let a flat near Bekesbourne station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Do you cover Westwood for remedial sealant?
Yes. We work across London and the South East, and Westwood is part of that. Just call 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear quote.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Do you do commercial work?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
What information do you need?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Can failed expansion joints be resealed?
Yes. Where mortar or filler has been used instead of sealant, it’s removed where it can be, and reseal with a flexible product.
What happens on the day
When we arrive, we start by going over the job with you. Surfaces next to the work are protected before any work begins. Most jobs take a few hours for most joints, depending on how much old sealant has to come out. In a small place like Westwood, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
How to prepare
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
- Try not to wet indoor joints just before the visit
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.
Read more
Aftercare tips
Aftercare is simple:
- Always have old sealant cut out, not covered
- Use a soft cloth, not a scourer, on silicone
- Ask why a joint failed before redoing it
- Have loose fittings fixed before resealing
If the joint ever needs renewing, have it cut out, not sealed over. Over-sealing is how many remedial jobs start, so the old bead should always come out first.
If a joint has failed more than once, stop resealing it. Have someone find out why, otherwise the next attempt will fail too.