Hampshire · England

Remedial sealant & repairs in West Heath, Hampshire

We cover West Heath for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.

  • Over-sealed joints coming away
  • A shower that leaks however often it’s resealed
  • Caulk or the wrong sealant used in a wet area

Trusted remedial sealant in West Heath

West Heath: your questions answered

Will you come out to West Heath?

Yes. West Heath is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Do you cover West Heath for remedial sealant?

Yes, West Heath is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.

Someone sealed over the old bead. Can you fix it?

Yes. Both layers come out; over-sealing fails because silicone will not bond to silicone.

Can you fix a reseal that hasn’t worked?

Yes. There’s normally a reason: sealant over sealant, movement or another leak, and we deal with the cause first.

Can I do it myself?

That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.

Can you do several jobs on one visit?

Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

Can old silicone be taken off without scratching the tiles?

Yes, with care. The old bead is cut and lifted with tools that suit the surface, and the residue is cleaned away. We point out any damage that is already there.

What do you need from me for a quote?

A short description and the location, plus photos if you have them. We’ll ask anything else we need to know.

About our remedial sealant in West Heath

In West Heath, as anywhere, remedial jobs tend to look alike: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. We strip each one back and start from scratch. Common call-outs are for beads that never stuck properly and smears and lumps from a botched reseal, on failed movement joints, leaking tray & enclosure joints and mouldy bath & shower sealant.

Homes around West Heath are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.

A one-year guarantee comes as standard, so you’re not left on your own once the job is done.

Location
West Heath (RG26)
Region
Hampshire
Guarantee
A year, on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Page updated
26 October 2026
Sealant gun close-up on a shower enclosure wall joint

Remedial sealant in West Heath: local notes

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

Schools such as The Priory Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. If you live in an older home near Christ Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.

West Heath is about 2 miles south of Tadley, in Hampshire. We carry out remedial sealant for homes and businesses in West Heath. 683 places in Hampshire are on our list, from the larger towns to small villages. You can also see our page for Reading, roughly 12 miles from West Heath.

Here we cover the RG26 postcode area for remedial sealant. You will find streets such as Deans Lane, The Common and Old Vyne Lane. Nearby, we also carry out remedial sealant in Charter Alley (1 mile south-east), Ramsdell (1 mile south), Pamber End (1 mile east), Salters Heath (2 miles east) and Monk Sherborne (2 miles south-east). Within a short drive, we also cover Basingstoke (4 miles south-east), Fleet (14 miles east), Alton (14 miles south-east), Yateley (14 miles east), Hook (9 miles east) and Popley (4 miles south-east).

Landmarks near West Heath

For rail, the closest station is Bramley (Hants) station, roughly 4 miles east. Well-known places in the area include Park Prewett Hospital (3.2 miles south-east) and Calleva Museum (3.3 miles north-east). Green spaces nearby include Daneshill Park Woods.

Map of West Heath © OpenStreetMap contributors

Can I do it myself?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.

Landlord and commercial work in West Heath

We work for letting agents and landlords as well as homeowners. Resealing between tenancies keeps a property looking cared for.

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.

What we’re called out for in West Heath

Products get mixed up: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.

If you can see any of these, it’s time to have the joints looked at:

  • Thick, messy sealant smeared over tiles
  • Sealant that came away because the surface wasn’t prepared
  • Black mould underneath the bead
  • Floor or wall movement joints that have failed

For landlords with property near Bramley (Hants) station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.

Before booking anyone

  • Are they insured?
  • What guarantee comes with the work
  • Which colour the sealant will be
  • What preparation is included

Our hiring checklist

What we do, step by step

You do not need to clear the whole room or building, only the area right around the joints. We protect the rest, and the job takes a few hours for most joints, depending on how much old sealant has to come out for a typical job. Somewhere like West Heath needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
  2. Each layer is cut out and the residue cleaned off.
  3. Mould is treated and the joint dried.
  4. The right product goes in, with backing where the joint moves.
  5. The joint is tooled and you are told about anything else we found.

Before we arrive

  • Let us know about earlier repairs to the joints
  • Mention any sign-in or site rules at work premises
  • Clear items away from the joints we’re working on

Get a quote

Every job is quoted individually, so the first step is telling us about yours. Just call 0345 464 0079 or send us an email with the details.

Ask for a quote

Related advice

Surface by surface

Over-sealed & botched joints

A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath, then reseal neatly.

Worktops & kitchens

Old kitchen sealant pulls back from the wall over time. It’s cut out, degreased and resealed.

Why it’s worth doing now in West Heath

A joint that has failed twice will fail again unless the cause is dealt with. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. Older cottages and farmhouses around West Heath can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

The cost depends on how much there is to do, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts, so you know where you stand.

Why choose Mr Mastic in West Heath

  • Tidy, careful work
  • Sanitary silicone with an anti-fungal additive in wet areas
  • You choose the colour before work begins
  • Colour picked to suit the job

Read what affects the cost or what customers say.

Aftercare tips

Good habits help new joints last longer. A few tips:

  • Have loose fittings fixed before resealing
  • Run the fan after every shower
  • Never fill a movement joint with mortar or grout
  • Always have old sealant cut out, not covered

Give the new sealant its full cure time: normally around 24 hours, or as long as we advise.

A failing joint rarely gets better on its own. Every shower or downpour sends more water through, into floors, walls or ceilings. Sorting it early limits the damage.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job