Hampshire · England
Remedial Sealant in Temple Valley
Failed sealant joints in Temple Valley need attention? We cut out the old, prepare the joints and apply the right sealant.
- Wide, uneven beads that look worse than the old ones
- Repeat leaks from the same joint
- Sealant peeling off a dusty or damp surface
Remedial sealant for homes and businesses in Temple Valley
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, taking care not to scratch the surfaces around it. Only then can new sealant bond. If you are dealing with sealant that came away because the surface wasn’t prepared and products that weren’t meant for the joint, we can put it right, on mouldy bath & shower sealant, leaking tray & enclosure joints and botched or over-sealed joints alike.
Somewhere as small as Temple Valley, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Every job comes with a 12-month guarantee.
- Place
- Temple Valley (SO21)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Surface by surface
Over-sealed & botched joints
Every layer has to come out, including the smears and film on surrounding tiles. New sealant needs a fully clean surface.
Movement & expansion joints
Some movement joints have been filled with mortar or grout. Where it can be raked out, we replace it with flexible sealant.
Questions from Temple Valley
Can you do remedial sealant in Temple Valley?
Yes, Temple Valley is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Can you help a landlord with a rental near Winchester station?
Yes, we work for landlords and agents. Just ring 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.
Can you strip sealant from an acrylic tray safely?
Yes. We avoid heavy scraping and use the right cleaner for each surface, so the new sealant bonds cleanly.
Do you fix expansion and movement joints?
Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Is there any odour?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
Can you work on commercial sites?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.
How do I get a quote for remedial sealant in Temple Valley?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Quotes for remedial sealant in Temple Valley
The price is agreed before any work begins. It’s based on:
- The old material and how stubborn it is
- Working hours on commercial sites
- Whether the work is at height
- Whether there’s mould to deal with
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- Where the property is
- What the problem is, such as mould, gaps, leaks or cracking
- Photos by email, if that’s easy
- How we’d reach the joints
Every job is quoted individually. Simply ring 0345 464 0079 or send us an email and describe the job and send photos if you have them.
Bathrooms and kitchens in Temple Valley
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Winchester station change hands often, and a joint that keeps failing is best fixed properly while the property is empty. Around Temple Valley, as everywhere, remedial sealant is only as good as the preparation behind it.
Temple Valley is about 3 miles east of Hyde, in Hampshire. Jobs in Temple Valley get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Temple Valley is one of 683 places in Hampshire where we work. Southampton is on our list too, about 12 miles from Temple Valley.
Every address in SO21 is within our area for remedial sealant, from the main roads to the quietest streets. Neighbouring places we cover for remedial sealant include Easton (2 miles north-west), Winnall (2 miles west), Morestead (2 miles south-west), Ovington (2 miles north-east) and Itchen Abbas (2 miles north). Larger places within reach include Winchester (3 miles west), Eastleigh (8 miles south-west), Fareham (14 miles south), Andover (15 miles north-west), Horndean (15 miles south-east) and Totton (15 miles south-west).
Around Temple Valley
Temple Valley’s nearest station is Winchester station, roughly 3.4 miles west. Well-known places in the area include Winchester College Treasury (3 miles west) and Wolvesey Castle (2.9 miles west). Open spaces near Temple Valley include Winnall Moors and Twyford Down.
How it works
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, we protect the area and start. Most jobs take a few hours, depending on how many layers have to come out. Somewhere like Temple Valley needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Tell us about any previous sealing or DIY attempts
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, phone 0345 464 0079 or email us.
Read more
When it is not the sealant
We will always be straight with you, so here’s what new sealant won’t do:
- Failed tanking or loose tiles behind the sealant
- A tray or bath that’s cracked
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think.
Surfaces we seal
- Failed movement joints
- Expansion joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Botched or over-sealed joints
Why act early in Temple Valley
It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and any film left behind stops new sealant sticking. Careful stripping is where most of our time goes. Where a wall is exposed, as many are in small places like Temple Valley, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
What you pay reflects the work, not a rough estimate. That is why we ask about the job first and agree the price before starting.
Why Temple Valley customers choose us
- Neat joints and a tidy finish
- An ARBOMaster approved applicator
- We’re fully insured
- One-year guarantee on every job
Towns and villages near Temple Valley
Other services in Temple Valley
Looking after it afterwards
So the new joints stay in good condition:
- Don’t point over movement joints
- Have loose fittings fixed before resealing
- Do not wait for a small gap to become a leak
- Clean sealant with mild products only
If the joint ever needs renewing, have it cut out, not sealed over. New silicone does not bond to old.
Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Each one is worth getting looked at.