Hampshire · England
Remedial sealant & repairs in Swanmore, Hampshire
Our applicators work in Swanmore on removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly.
- Sealant applied over old sealant that has lifted
- A shower that leaks however often it’s resealed
- Torn expansion joints
Swanmore: your questions answered
Do you work for landlords with property near Botley station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear quote.
Do you cover Swanmore for remedial sealant?
Yes. Our work covers London and the South East, and Swanmore is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.
Are you insured?
Yes, we are fully insured for every job we do.
What if the leak is not the sealant?
Then we explain what we’ve found. A plumber or fitter may be needed.
Does remedial work come with a guarantee?
Yes, with our 12-month guarantee. If we have pointed out another problem, getting it fixed helps the new joint last.
Can you remove sealant that’s been put over old sealant?
Yes. Stripping layered sealant takes longer than a normal reseal, but it’s the only way the new joint will last.
Will there be a smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
How much does remedial sealant cost in Swanmore?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Remedial sealant in Swanmore
Two decades of sealant work means we recognise most failures quickly. We’re ARBOMaster approved and fully insured, and remedial work carries our one-year guarantee. If you have a shower that leaks however often it’s resealed and sealant applied over old sealant that has lifted, we can put it right, on leaking tray & enclosure joints, botched or over-sealed joints and failed movement joints alike.
In and around Swanmore, older properties sit alongside newer ones. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
All of our work is guaranteed for twelve months.
- Where
- Swanmore (SO32)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
After the cure time, these simple habits help:
- Get the cause of a repeat leak found before resealing
- Clean sealant with mild products only
- Keep an eye on the ceiling below the bathroom
- Deal with small splits early
Ventilation keeps mould away from the new bead: use the extractor or open a window after showering.
Mould under a second layer of sealant keeps growing out of sight. By the time it shows through, the joint is well past saving.
What affects the quote in Swanmore
We quote each job individually. These are the things that affect it:
- How many areas need sealing
- The size of the job
- Any working-time requirements on site
- Whether the work is at height
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
To help us quote quickly, let us know:
- Pictures of the joints, sent by email
- Where the job is, and your postcode
- Roughly how big the job is
- The type of property
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you’re ready, phone 0345 464 0079 or send us an email.
What sealant work can’t fix
A few problems are outside what sealant work can do:
- Older mastics that may need an asbestos check before removal
- Cracks in the fitting rather than the joint
- A leaking trap, valve or supply pipe
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
Surfaces we seal
- Failed movement joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Expansion joints
Nearby places to Swanmore
More services for Swanmore
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
What remedial sealant looks like in Swanmore
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St Barnabas, walls and floors in older homes can move, and sealant and grout show it first. Rented homes near Botley station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. Schools such as Swanmore Church of England Aided Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Swanmore is about 6 miles east of Hedge End, in Hampshire. Every kind of property in Swanmore can book us for remedial sealant. Every job comes with our 12-month guarantee. Swanmore is one of 683 places in Hampshire we cover for remedial sealant. Southampton is on our list too, about 9 miles from Swanmore.
We work across SO32 for remedial sealant and the streets around it. Whether your property is on Church Road, Myers Close and Spring Vale or anywhere close by, our applicators can take on the job. Other places close to Swanmore include Hill Grove (1 mile east), Upper Swanmore (1 mile north-east), Mislingford (1 mile south-east), Shirrell Heath (1 mile south) and Kingsmead (2 miles south-east). Further out, we also cover Winchester (10 miles north-west), Gosport (10 miles south), Havant (10 miles south-east), Eastleigh (7 miles west), Fareham (6 miles south) and Horndean (8 miles east).
Around Swanmore
Typical jobs here are in homes near Swanmore College of Technology, among other places. The closest station to Swanmore is Botley station, roughly 3.7 miles south-west. A little further out are Bishop's Waltham Museum (1.7 miles north-west) and Knowle Hospital (4.3 miles south). Not far away are Beacon Hill and Bishops Waltham Branch LNR.
DIY sealant or a professional job?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.
The process
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it normally takes a few hours, depending on how many layers have to come out. Parking around Swanmore is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
How to prepare
- On commercial sites, let us know about site rules
- Mention any leaks or damp you’ve noticed
- Tell us about any previous sealing or DIY attempts
Get a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or email us.
Read more
What the job involves on each surface
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, including the screen profile and tray edges.
Movement & expansion joints
A movement joint must be able to stretch. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed with a low-modulus product.