Surrey · England

Remedial Sealant in Stroud Common

Removing failed, mouldy or leaking sealant and putting it right for Stroud Common, backed by a one-year guarantee. Call for a quick quote.

  • Sealant applied over old sealant that has lifted
  • Wide, uneven beads that look worse than the old ones
  • Mould trapped under a layer of silicone

Need remedial sealant in Stroud Common?

How we quote for remedial sealant

There’s no set price list, because jobs vary so much. What we look at:

  • The number and length of the joints
  • Which sealant suits the joint
  • Access and height
  • The old material and how stubborn it is

Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.

Helping us quote

You don’t need to know the technical terms. Just tell us:

  • Where the property is
  • How we’d reach the joints
  • Roughly how big the job is
  • A few pictures by email, if you can

It all starts with a short chat. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. Whenever you’re ready, ring 0345 464 0079 or drop us an email.

Remedial sealant in Stroud Common

In Stroud Common, as anywhere, remedial jobs tend to look alike: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. Each is stripped back and done again properly. We work on mouldy bath & shower sealant, failed movement joints and botched or over-sealed joints, and people most often call us about dark patches showing through the sealant and products that weren’t meant for the joint.

Being in a small place like Stroud Common makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.

The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.

Mr Mastic applicator smiling as he applies silicone to the corner of a bath
Place
Stroud Common (GU5)
Wider area
Surrey
Guarantee
12 months on all our work
Quote
A clear quote up front
Call
0345 464 0079
Updated
26 October 2026

What we are called out for in Stroud Common

Products get mixed up: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.

These are the problems we’re asked about most:

  • Leaks that keep coming back after resealing
  • Thick, messy sealant smeared over tiles
  • Products that weren’t meant for the joint
  • Floor or wall movement joints that have failed

If you let a flat or house near Chilworth station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.

Comparing quotes

  • Whether all the old sealant comes out first
  • What the cure time is
  • How hidden problems are handled
  • What product goes in the joint

Choosing a sealant specialist

Keeping the joints in good condition

After the cure time, these simple habits help:

  • Find out why the sealant failed first
  • Keep an eye on the ceiling below the bathroom
  • Keep bleach and abrasives off the bead
  • Deal with small splits early

Do not let anyone seal over it later. Over-sealing is how many remedial jobs start, so the old bead should always come out first.

Signs to act on: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Any of them means it’s time for remedial work.

What sealant work can’t fix

We’d rather tell you now than do work that won’t last, so these are the limits:

  • Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
  • Leaks from a shower valve, waste or pipework (a plumber’s job)
  • A bath, tray or worktop that moves until it’s properly fixed

Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before you book.

Surfaces we seal

  • Failed movement joints
  • Botched or over-sealed joints
  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Expansion joints
  • Leaking tray & enclosure joints

Stroud Common: your questions answered

Can you do remedial sealant in Stroud Common?

Yes, Stroud Common is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will send you a clear quote.

Do you work for landlords with property near Chilworth station?

Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.

My shower still leaks after a reseal. Can you sort it?

Yes. Repeat leaks generally come from over-sealing, movement or water getting in elsewhere, so we find that first.

What if the leak is not the sealant?

In that case, we tell you what we have found. A plumber or fitter may be needed.

Where do you work from?

We work from Crawley. We cover Stroud Common and the rest of Surrey.

How long should I leave it?

Many sealants skin over quickly but take longer to cure fully. We’ll tell you how long to leave the joint before we leave.

How much does remedial sealant cost in Stroud Common?

We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.

Do you guarantee remedial jobs?

Yes. You get our 12-month guarantee, and we’re fully insured.

Remedial sealant in Stroud Common: local notes

Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.

If you look after a building such as Wonersh and Shamley Green CofE Aided Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. Homes close to Christ Church include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Stroud Common is about 6 miles south-east of Guildford, in Surrey. Stroud Common gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Stroud Common is one of 395 towns and villages in Surrey where we work. There’s also a page for Crawley, roughly 15 miles from Stroud Common.

All of GU5 is covered for remedial sealant, from the main roads to the quietest streets. That includes homes and businesses on Stroud Lane and Church Hill and the roads around them. Neighbouring places we cover for remedial sealant include Shamley Green (1 mile north-west), Rowly (1 mile south), Grafham (1 mile south-west), Birtley Green (2 miles west) and Wonersh (2 miles north-west). Further out, we also cover Guildford (6 miles north-west), Woking (10 miles north), Camberley (14 miles north-west), Epsom (15 miles north-east), Horley (15 miles east) and Redhill (15 miles east).

Landmarks near Stroud Common

Around Stroud Common, our work takes us to homes and buildings near Cucknell's Wood and Bricklayers Arms, among other places. Stroud Common’s nearest station is Chilworth station, about 2.7 miles north. Well-known places in the area include St. Luke’s Hospital (4.6 miles north-west) and Guildford Castle (4.7 miles north-west). For a walk, there’s Silent Pool and St Martha's Hill and Colyer's Hanger.

Map of Stroud Common © OpenStreetMap contributors

DIY versus a professional finish

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.

What happens if it’s left?

Remedial work takes longer than a straight reseal, but rarely a lot: it takes a few hours, depending on how many layers have to come out. Compared with chasing the same leak every few months, it’s time well spent. Where a wall is exposed, as many are in small places like Stroud Common, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.

Why choose Mr Mastic in Stroud Common

  • Colour agreed with you before we start
  • A choice of colours where the product allows
  • We never seal over old sealant
  • 4.9 on Google from 180+ five-star reviews

Take a look at our cost guide or our reviews.

What we do, step by step

We keep the work tidy and contained to the area we’re working on, so you can carry on as normal. Expect the work to take a few hours for most joints, depending on how much old sealant has to come out. Somewhere as small as Stroud Common, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
  2. Old beads and residue are removed down to clean surfaces.
  3. We treat any mould and dry the joint thoroughly.
  4. We reseal with a product suited to the joint, backed where needed.
  5. We finish neatly and point out anything that needs another trade.

Before we arrive

  • Where the joints are inside, avoid wetting them before we arrive
  • Let us know about stairs, lifts or work at height
  • Keep pets and children clear of the area while we work

How to get a quote

Call for a quick quote, or email us if that is easier. Describe what needs sealing and we will explain what’s involved.

Ask for a quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job