Perth and Kinross · Scotland
Stormontfield Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right in Stormontfield, with a 12-month guarantee on every job. Call for a quick quote.
- Decorators’ caulk around a bath or shower
- Over-sealed joints coming away
- Gaps opening along the back of the worktop
Remedial sealant in Stormontfield, done properly
A movement joint stops working when its sealant splits or sets hard. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. We work on mouldy bath & shower sealant, botched or over-sealed joints and expansion joints, and common reasons people get in touch are worktop sealant that has shrunk and split and sealant peeling off a dusty or damp surface.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
A 12-month guarantee comes as standard, so you are covered after we’ve gone.
- Where
- Stormontfield (PH2)
- Wider area
- Perth and Kinross
- Cover
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Your questions about remedial sealant in Stormontfield
Is Stormontfield in your area for remedial sealant?
Yes. Our work covers the whole of Scotland, and Stormontfield is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job.
Can you help a landlord with a rental near Perth station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we will send you a clear quote.
Will there be a smell?
Some sealants have a smell while they cure. Opening a window helps.
What if the leak is not the sealant?
You will hear it from us. If it’s a cracked tray, a failed valve or a leaking waste, resealing will not fix it, so we will not pretend it will.
Where is Mr Mastic based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
How much does remedial sealant cost in Stormontfield?
Size, access and the old material all affect the cost. Ask us for a quote and we will talk you through it.
Can I choose the sealant colour?
We will suggest a colour to suit the surroundings. The choice depends on the product the joint needs.
When is the sealant fully cured?
Different products cure at different speeds, so follow the cure time we give you.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.
Stormontfield homes and their sealant
In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
For site and facilities teams at buildings such as Bertha Park High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. For landlords with property near Perth station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Stormontfield is about 3 miles north of Perth, in Perth and Kinross. Stormontfield gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Stormontfield is one of 107 towns and villages in Perth and Kinross where we work. Dundee is on our list too, around 18 miles away.
Our applicators cover all of PH2 for remedial sealant. We also cover the places around Stormontfield: Luncarty (1 mile west), Guildtown (2 miles north-east), Stanley (2 miles north), Tulloch (3 miles south) and Scone (3 miles south-east). We also work in nearby towns such as Perth (3 miles south), Blairgowrie and Rattray (11 miles north-east), Auchterarder (14 miles south-west), Letham (3 miles south), Alyth (15 miles north-east) and Coupar Angus (10 miles north-east).
Near you in Stormontfield
For rail, the closest station is Perth station, roughly 3.9 miles south of the centre. Nearby you will also find Murray Royal Hospital (3.5 miles south) and St John's Shopping Centre (3.6 miles south). Not far away are Kinnoull Hill.
What happens if it’s left?
Hidden water does the most damage: wet floors, stained ceilings and swollen worktops. Dealing with the joint now is a small job by comparison. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
Why choose Mr Mastic in Stormontfield
- Anti-fungal sanitary silicone in wet areas
- Any old sealant cut out fully, not covered over
- One-year guarantee on every job
- Full insurance on every job
See our cost guide or our reviews.
Looking after it afterwards
To keep the joints looking good and working properly:
- Do not point over movement joints
- Don’t wait for a small gap to become a leak
- Clean sealant with mild products only
- Check trays and worktops do not move
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
Don’t keep resealing the same joint. Have someone find out why, otherwise the next attempt will fail too.
Quotes for remedial sealant in Stormontfield
Every job gets its own quote. This is what makes a difference:
- Working hours on commercial sites
- How many areas need sealing
- The product the joint needs
- Whether old sealant or filler has to be cut out
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
Helping us quote
To help us quote quickly, let us know:
- Where the property is
- If someone has resealed it before
- Pictures of the joints, sent by email
- The rough size of the job
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved before giving you a price.
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will give you a quote.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
How the visit works
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours, depending on how many layers have to come out. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- We use the right backing and sealant for any joint that moves.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Move anything stored near the joints
- Mention if the joints have been sealed before
- Keep pets and children clear of the area while we work
Get a quote
Need a quote? Please drop us a line at info@mrmastic.co.uk with a few details. We will explain what we’d do and give you a clear quote before we start.
Related advice
Different surfaces, different methods
Movement & expansion joints
A sealant stuck to the back of the joint cannot stretch. Backing stops that, so the sealant grips the two sides only.
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. We strip it, degrease the joint and reseal colour-matched to the worktop.