Perth and Kinross · Scotland
Spittal of Glenshee Remedial Sealant
Remedial sealant for Spittal of Glenshee, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Mould trapped under a layer of silicone
- Torn expansion joints
- Wide, uneven beads that look worse than the old ones
Why act early in Spittal of Glenshee
Another bead over the top will not fix a failed joint. It does not grip the old layer, so the leak carries on and there’s now more to remove. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first and agree the price before starting.
Why choose Mr Mastic in Spittal of Glenshee
- Every job guaranteed for a year
- We leave the area clean and tidy
- Sanitary silicone with an anti-fungal additive in wet areas
- ARBOMaster approved applicator
Take a look at our cost guide or our reviews.
Remedial sealant for homes and businesses in Spittal of Glenshee
Remedial jobs in Spittal of Glenshee usually fall into a few patterns: over-sealed joints, hidden mould, repeat leaks and split movement joints. Each is stripped back and done again properly. We work on botched or over-sealed joints, expansion joints and failed movement joints, and the jobs we see most are sealant that came away because the surface wasn’t prepared and leaks that keep coming back after resealing.
Being further from a city does not change the work: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.
The work is covered for a year after we finish. If anything isn’t right with it, send an email to info@mrmastic.co.uk.
- Place
- Spittal of Glenshee (PH10)
- Region
- Perth and Kinross
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What the job involves on each surface
Windows & doors
Frames resealed over the top end up with hard, layered mastic. All of it is cut out and the frame and wall cleaned.
Mouldy bath & shower sealant
Black mould inside the bead won’t scrub out. All of it comes out, and the joint is treated and dried ahead of a new anti-fungal bead.
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Keep the room well ventilated
- Never fill a movement joint with mortar or grout
- Get the cause of a repeat leak found before resealing
- Look for stains below bathrooms now and then
Where we’ve pointed out another fault, have it put right, or the new joint may fail again.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into floors, walls or ceilings. Early action keeps it to a sealant job.
Do you need remedial sealant in Spittal of Glenshee?
Sealant needs a clean, dry surface with no grease on it. Residue, moisture or dust left in the joint weaken the bond, and the joint starts to come away early.
Common reasons people contact us are:
- Products that weren’t meant for the joint
- Sealant applied over old sealant that has lifted
- Movement joints that have split or pulled away
- Dark patches showing through the sealant
Around Spittal of Glenshee, as everywhere, remedial sealant is only as good as the preparation behind it.
What to look for in a quote
- How long to leave it before use
- Whether you can choose the colour
- What happens if the job turns out different
- How long the guarantee is
What affects the cost of remedial sealant
Call for a quick quote. The main things that affect it are:
- Whether the work is at height
- How many rooms, windows or areas are involved
- Any mould that needs treating
- Which sealant suits the joint
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re unsure, email us at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Asking for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it’s a home or a business
- If someone has resealed it before
- Roughly how big the job is
- The problem you’ve noticed
We quote each job on its own. Just drop us a line at info@mrmastic.co.uk with the details.
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
How it works
Good joint work is mostly preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. Outdoor work around Spittal of Glenshee depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- We use the right backing and sealant for any joint that moves.
- The new joint is tooled neatly and we explain anything else we found.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Tell us if parking is tricky
- Move anything stored near the joints
Get a quote
For a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Related advice
Remedial sealant around Spittal of Glenshee
Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out.
For an older house near a landmark such as Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Spittal of Glenshee is about 16 miles north of Blairgowrie and Rattray, in Perth and Kinross. Jobs in Spittal of Glenshee get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Our area takes in 107 places across Perth and Kinross, large and small. We also work in Dundee, about 30 miles from Spittal of Glenshee.
Jobs for remedial sealant in PH10 is quoted and booked the same way as anywhere else. If you’re just outside Spittal of Glenshee, we cover Kirkmichael (7 miles south), Netherton (11 miles south), Bridge of Cally (12 miles south), Moulin (12 miles south-west) and Pitlochry (13 miles south-west).
Landmarks near Spittal of Glenshee
Nearby you will also find Dalnaglar Castle (4 miles south-east). The countryside around Spittal of Glenshee includes Loch Beanie.
Nearby places to Spittal of Glenshee
Also in Spittal of Glenshee
Spittal of Glenshee questions
Is Spittal of Glenshee within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Can you do remedial sealant in Spittal of Glenshee?
Yes, Spittal of Glenshee is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you take off two layers of silicone?
Yes. Each layer is cut out and the residue cleaned off, before resealing with a single bead.
Which products do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll explain our choice.
Will it make a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit.