Na h-Eileanan Siar · Scotland

Remedial sealant & repairs in Sandwick, Na h-Eileanan Siar

Removing failed, mouldy or leaking sealant and putting it right in Sandwick, with a one-year guarantee on every job. Ask us for a quote.

  • Caulk or the wrong sealant used in a wet area
  • Beads that never stuck properly
  • Movement joints that have split or pulled away

Remedial sealant in Sandwick

When to call us in Sandwick

How a joint is built matters as much as the product. A bead bonded on three sides, or laid too thick, can’t flex, so it tears when the joint moves. Backing sets the depth and stops that.

People normally contact us after spotting one of these:

  • Thick, messy sealant smeared over tiles
  • Sealant that came away because the surface wasn’t prepared
  • Products that weren’t meant for the joint
  • Leaks that keep coming back after resealing

Around Sandwick, as everywhere, remedial sealant is only as good as the preparation behind it.

Comparing quotes

  • Whether they seal over old material or remove it
  • What the cure time is
  • What happens if they find a problem under the old sealant
  • Which colour the sealant will be

How to choose a mastic man

How we handle remedial sealant in Sandwick

Movement and expansion joints fail when the sealant cannot stretch. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. We work on failed movement joints, expansion joints and shrunken worktop sealant, and people most often call us about a shower that leaks however often it’s resealed and caulk or the wrong sealant used in a wet area.

A bathroom in a place like Sandwick gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.

The work is covered for a year after we finish. If there’s a problem with it, please send an email to info@mrmastic.co.uk.

Sealant gun close-up on a shower enclosure wall joint
Where
Sandwick (HS1, HS2)
Wider area
Na h-Eileanan Siar
Cover
12 months on all our work
Quote
A clear price before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026

Sandwick: your questions answered

Do you work in hotels near Sandwick?

Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.

Can you do remedial sealant in Sandwick?

Yes, Sandwick is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing, and we’ll give you a clear price.

Where is Mr Mastic based?

Our base is Crawley. Our area covers South East England, London and Scotland.

What sealant do you use?

Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.

What if resealing will not fix my leak?

We check for that before we reseal. If the fault is elsewhere, you’ll know before any work is done.

Can you do several jobs on one visit?

Yes. More than one area can be quoted together.

Do you hold any approvals?

Yes. We’re an ARBOMaster approved applicator.

What should I tell you?

The location, the problem and the rough size of the job. If you can, email a few photos.

Landlord and commercial work in Sandwick

If you manage several properties in or around Sandwick, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.

A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.

What happens on the day

A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. Most jobs take a few hours for a typical bath or shower, longer where several layers have been applied. Around Sandwick, distance and access matter more than parking. Let us know how to find you and how to reach the joints.

  1. We start by checking the joint for movement, leaks and the reason it failed.
  2. Every layer of old sealant is cut and cleaned out.
  3. The joint is cleaned, treated for mould and left to dry.
  4. Moving joints get backing and a flexible sealant to suit.
  5. The new joint is tooled neatly and we explain anything else we found.

Getting ready for the visit

  • Let us know about stairs, lifts or work at height
  • On commercial sites, let us know about site rules
  • Try not to wet indoor joints just before the visit

Getting a quote

For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll explain what’s involved.

Get a price

Advice

Surface by surface

Worktops & kitchens

Kitchen joints often have grease and cleaning residue deep in them, so we spend extra time cleaning.

Over-sealed & botched joints

A botched joint can hide two or three layers of sealant, and silicone residue is cleaned off the tiles too. Only a clean joint will take a new bead.

How we quote for remedial sealant

Jobs vary more than people expect. The main factors:

  • How many rooms, windows or areas are involved
  • Whether old sealant or filler has to be cut out
  • The size of the job
  • Working hours on commercial sites

Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you’re unsure, email us at info@mrmastic.co.uk for an honest opinion and a quote.

What to tell us for a quote

When you call or email, it’s useful to know:

  • Whether it has been sealed before
  • Any access issues, like height or stairs
  • The type of property
  • The address or postcode of the job

We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, drop us a line at info@mrmastic.co.uk.

Bathrooms and kitchens in Sandwick

Sandwick is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.

Homes close to Stornoway High Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.

Sandwick is about 1 mile south-east of Stornoway, in Na h-Eileanan Siar. Every kind of property in Sandwick is covered for remedial sealant. Every job comes with our one-year guarantee. We cover 87 towns and villages across Na h-Eileanan Siar, large and small.

We cover every part of HS1 and HS2 for remedial sealant and the streets around it. Whether your property is on Stoneyfield, East Street and Olivers Brae or anywhere close by, our applicators can take on the job. Neighbouring places we cover for remedial sealant include Plasterfield (1 mile north), Sanndabhaig (1 mile east), Steinis (1 mile north), Stornoway (1 mile north-west) and Branahuie (1 mile east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.

Landmarks near Sandwick

Other landmarks nearby include Western Isles Hospital (1.5 miles north-west) and Lewis Loom Centre (1.3 miles west). Not far away are Loch Àirigh na Lic.

Map of Sandwick © OpenStreetMap contributors

When it is not the sealant

New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:

  • Older mastics that may need an asbestos check before removal
  • Failed tanking or loose tiles behind the sealant
  • A leaking trap, valve or supply pipe

Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before you book.

Where we work in Sandwick

  • Botched or over-sealed joints
  • Leaking tray & enclosure joints
  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Failed movement joints
  • Expansion joints

How to look after the new joints

To keep the joints looking good and working properly:

  • Keep bleach and abrasives off the bead
  • Deal with small splits early
  • Keep an eye on the ceiling below the bathroom
  • Air the bathroom so the sealant can dry

Keep an eye on the joint at first, especially if movement was the problem. If anything changes, just email us at info@mrmastic.co.uk.

Don’t keep resealing the same joint. Get the cause found first, or the next bead will go the same way.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job