East Sussex · England
Remedial Sealant in Rye
Removing failed, mouldy or leaking sealant and putting it right in Rye, with a one-year guarantee on every job. Ask us for a quote.
- Mould trapped under a layer of silicone
- Sealant applied over old sealant that has lifted
- Torn expansion joints
Common problems we fix in Rye
Products get mixed up: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.
Keep an eye out for these signs:
- Mould trapped under a layer of silicone
- Floor or wall movement joints that have failed
- A second bead peeling off the first
- Beads that never stuck properly
For landlords with property near Rye station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
What to look for in a quote
- What preparation is included
- Who does the work, and how experienced they are
- Which sealant they’ll use, and why
- What the quote includes, VAT included or not
Remedial sealant for homes and businesses in Rye
Remedial work is what we do when sealant has failed or been done badly. New sealant over old, smeared beads, unsuitable products and hidden mould all have to come out before the joint can be done properly. If you have floor or wall movement joints that have failed and caulk or the wrong sealant used in a wet area, we can help, on failed movement joints, mouldy bath & shower sealant and botched or over-sealed joints alike.
Homes around Rye range from older cottages to more recent houses. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
A 12-month guarantee comes as standard.
- Where
- Rye (TN31)
- Wider area
- East Sussex
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Your questions about remedial sealant in Rye
Do you work in hotels near Rye?
Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.
Do you work for landlords with property near Rye station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.
How long will it take to strip and reseal the joint?
Longer than a simple reseal, because every layer has to come out. Most jobs take a few hours.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. First we check whether the leak is the sealant at all, then strip and reseal the joints.
Is there any odour?
Sometimes, a little. It fades as the sealant cures.
Can you remove old sealant without damaging the bath?
Yes. We take our time over removal, particularly on softer surfaces like acrylic.
When is the sealant fully cured?
Cure times vary by product and the temperature. Before we leave, we’ll tell you the cure time.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Nearby places to Rye
Also in Rye
How we quote for remedial sealant
We quote each job individually. These are the things that affect it:
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
- How many areas need sealing
- Whether the work is at height
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will go through it with you.
What we need to know
Photos help, but a description is a good start. Please mention:
- What’s wrong with the joints now
- The address or postcode of the job
- Photos by email, if that’s easy
- If it’s domestic, commercial or a hotel
Need a quote? Please call 0345 464 0079 or drop us an email with a few details. We’ll explain what we’d do and send you a clear quote before we start.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
When something else is needed
We won’t take on work that won’t last, so these are the limits:
- Plumbing leaks behind walls or under trays
- A bath, tray or worktop that moves until it’s properly fixed
- Sealant in an older building that needs testing for asbestos first
If in doubt, ring 0345 464 0079 or email us and we will say what we think.
What we seal
- Shrunken worktop sealant
- Failed movement joints
- Leaking tray & enclosure joints
- Expansion joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
How to look after the new joints
To keep the joints looking good and working properly:
- Don’t wait for a small gap to become a leak
- Use a soft cloth, not a scourer, on silicone
- Check trays and worktops don’t move
- Find out why the sealant failed first
Leave the new joint to cure fully before it gets wet or moves: usually around 24 hours, or as long as we advise.
A split movement joint lets rain into walls and floors, and the longer it’s left, the more the joint edges break down. A joint with sound edges is far easier to reseal.
How the visit works
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the work takes a few hours for most joints, depending on how much old sealant has to come out for a typical job. A visit to Rye is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- We clean the joint, treat any mould and let it dry.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Tell us about any previous sealing or DIY attempts
- Let us know about parking restrictions
Getting a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To get started, ring 0345 464 0079 or drop us an email.
Read more
Remedial sealant around Rye
Rye is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to Church of St Mary include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. Schools such as Rye Community Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Rye is about 9 miles north-east of Hastings, in East Sussex. If you need remedial sealant in Rye, it’s easy to get a quote: please call 0345 464 0079 or drop us an email. We’re based in Crawley and cover East Sussex, Rye included. Our East Sussex coverage runs to 289 places, and Rye is one of them. There’s also a page for Brighton, roughly 38 miles from Rye.
Jobs for remedial sealant in TN31 is quoted and booked the same way as anywhere else. Remedial sealant is available to properties on Market Road, High Street and Market Street. Rye is on the A259 and A268, so it’s easy for us to get to. We also cover Playden (1 mile north), East Guldeford (1 mile north-east), Rye Harbour (1 mile south-east), Houghton Green (1 mile north) and Rye Foreign (2 miles north-west). Within a short drive, we also cover Hastings (9 miles south-west), Bexhill-on-Sea (14 miles south-west), St Leonards (10 miles south-west), Hastings Old Town (9 miles south-west), Belmont (9 miles south-west) and Hollington (10 miles south-west).
Landmarks near Rye
Around Rye, our work takes us to homes and buildings near St Anthony of Padua Church, Rye Harbour LNR and The Old Bell Inn and the streets around them. There’s a railway station in Rye itself: Rye station. Other landmarks nearby include Ypres Tower (within half a mile east) and Rye Castle Museum (East Street) (under half a mile east). The countryside around Rye includes Rye Harbour Nature Reserve.